Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.83
The WAGO 231-638 is an 8-pole male pluggable connector from the WAGO MCS MIDI Classic 231 Series. Featuring CAGE CLAMP® spring pressure connection technology, a 5.08 mm pin spacing and an orange insulating housing, this connector provides a dependable detachable electrical interface for industrial control panels, automation equipment and machinery.
Designed for solid and fine-stranded copper conductors from 0.08–2.5 mm², the WAGO 231-638 provides eight independent conductor connections without conventional terminal screw tightening. Its operating-tool-actuated CAGE CLAMP® terminals enable efficient conductor insertion and removal, making the connector suitable for cable pre-assembly, machine wiring and equipment maintenance.
With an IEC rated current of 12 A, an IEC voltage rating of 630 V under overvoltage category II / pollution degree 2, and a free-hanging, in-line mounting configuration, the WAGO 231-638 offers a compact connection solution for modular industrial equipment. Its detachable male interface is designed for use with appropriately matched WAGO MCS MIDI Classic female connectors and headers.
Installation note: WAGO MCS connectors are not intended to be connected or disconnected while energised or under load. Ensure the circuit is isolated before mating or unmating the connector. Electrical ratings must be evaluated for the complete mating assembly and the applicable installation conditions.
The WAGO MCS MIDI Classic 231 Series provides modular connection technology for industrial machinery, automation equipment and electrical control systems. The 231-638 combines eight conductor termination positions with a detachable male connector interface, making it suitable for cable assemblies that require organised, serviceable multi-circuit connections.
WAGO's CAGE CLAMP® spring pressure technology maintains contact pressure on correctly prepared copper conductors without relying on conventional terminal screw tightening. The connector accepts solid and fine-stranded conductors, including suitable ferrule-terminated wiring. Operating-tool access from two directions supports efficient conductor insertion and removal during cable preparation and maintenance.
The orange PA 66 housing, tin-plated contacts and 5.08 mm pitch provide a compact and insulated electrical interface. Unlike variants with mounting flanges, clamping collars or snap-in mounting feet, the standard 231-638 uses a free-hanging in-line configuration. This makes it particularly suitable for compatible cable-to-cable and cable-to-equipment connections where an integrated mounting feature is not required.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 8 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Manufacturer part number | 231-638 | |
| Product type | 1-conductor male pluggable connector | |
| Connector gender | Male | |
| Connection points | 8 | |
| Number of potentials | 8 | |
| Number of levels | 1 | |
| Pin spacing | 5.08 mm | |
| Connection technology | CAGE CLAMP® | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size range | 28–12 AWG | |
| Wire stripping length | 8–9 mm | |
| Actuation type | Operating tool | |
| Actuation direction | Parallel or perpendicular to conductor entry | |
| Plug wire entry | 180° (in-line) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, category II / pollution degree 2) | 630 V | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Mounting type | Free-hanging (in-line) | |
| Insulating material | Polyamide 66 (PA 66) | |
| Flammability classification | UL 94 V-0 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Operating temperature range | −60 to +100 °C | |
| Insulation height | 14.30 mm | |
| Connection system | WAGO Multi Connection System (MCS) | |
| Product family | Pluggable terminal block connectors |
The WAGO 231-638 is an 8-pole male pluggable connector used for detachable electrical connections in industrial control panels, automation equipment and machinery. Its free-hanging in-line configuration is suitable for compatible cable and equipment wiring assemblies.
The connector has 8 poles, providing eight independent conductor connection positions with a nominal 5.08 mm pin spacing.
The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm². Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while those with uninsulated ferrules are supported from 0.25–2.5 mm².
The connector has an IEC rated current of 12 A and an IEC rated voltage of 630 V under overvoltage category II / pollution degree 2. Its listed UL electrical ratings are 15 A and 600 V, subject to the applicable approval and installation conditions.
Both are 8-pole male connectors from the WAGO MCS MIDI Classic 231 Series with 5.08 mm pin spacing and CAGE CLAMP® termination. The standard 231-638 has a free-hanging in-line configuration, whereas the 231-638/018-000 incorporates snap-in mounting feet for compatible DIN-35 rail and panel installations.
WAGO MCS MIDI Classic connectors provide industrial automation engineers, control panel manufacturers and machine builders with established spring pressure connection technology, modular wiring interfaces and dependable detachable connections for industrial electrical equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.