Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.81
The WAGO 231-638/023-000 is a high-quality 8-pole feed-through PCB terminal block designed for secure electrical connections between external conductors and printed circuit boards. Part of the established WAGO 231 Series, this orange terminal block combines a compact 5.08 mm contact pitch with proven CAGE CLAMP® spring pressure connection technology for dependable, screwless conductor termination.
Featuring through-hole solder contacts, an integrated mounting flange and a clamping collar, the WAGO 231-638/023-000 is particularly suitable for front-panel feed-through applications. Its eight independent connection points provide an organised interface between external wiring and electronic circuitry, while the screwdriver-actuated spring clamps simplify conductor installation and maintenance.
With an IEC rated current of 16 A, rated voltages of 320 V or 630 V depending on installation conditions, and conductor compatibility up to 2.5 mm², this terminal block offers a dependable solution for industrial electronic assemblies. Its through-hole technology (THT) and panel-mounting capability make it especially useful for automation equipment, industrial control panels and OEM machinery.
The WAGO 231-638/023-000 combines WAGO's established CAGE CLAMP® spring pressure connection technology with a fixed printed circuit board interface. Conductors are retained by spring clamping elements rather than screw-tightened contacts, helping maintain consistent electrical contact and simplifying wiring procedures.
The terminal block provides eight independent conductor connection positions with a 5.08 mm pitch. Each connection corresponds to an individual solder pin, enabling external wiring to connect directly to the associated PCB circuitry.
A key feature of the /023-000 variant is its suitability for front-panel feed-through installation. The integrated mounting flange and clamping collar allow the terminal block to be incorporated into suitable panel openings, including flush or protruding enclosure arrangements. The manufacturer's dimensional drawing should be followed when designing the panel opening and mounting arrangement.
The terminal block uses through-hole technology (THT) with eight in-line solder pins. Each solder pin measures 0.8 × 1.3 mm and has a length of 4.7 mm. The specified drilled hole diameter is 1.8 mm with a positive tolerance of 0.1 mm, and the maximum PCB thickness is 1.5 mm.
The connector's front-entry conductor arrangement makes it particularly useful for external wiring access without requiring the installer to reach directly into the PCB enclosure. Conductors should be stripped to 8–9 mm and inserted using the appropriate operating tool in accordance with WAGO's installation instructions.
Unlike a detachable male plug, the WAGO 231-638/023-000 is a fixed PCB terminal block. Its solder contacts provide the electrical connection to the circuit board, while the CAGE CLAMP® terminals allow individual external conductors to be connected and disconnected during installation or maintenance after the equipment has been safely isolated.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 8 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series | |
| Manufacturer part number | 231-638/023-000 | |
| Product type | Feed-through PCB terminal block | |
| Connection type | Wire-to-board terminal connection | |
| Number of connection points | 8 | |
| Number of potentials | 8 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Contact pitch | 5.08 mm | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation method | Operating tool / screwdriver | |
| Conductor entry direction relative to PCB | 0° | |
| PCB mounting technology | Through-hole technology (THT) | |
| PCB solder pin arrangement | In-line | |
| Number of solder pins per potential | 1 | |
| Total number of solder pins | 8 | |
| Mounting type | Mounting flange | |
| Mounting applications | Feed-through mounting, panel mounting and PCB mounting | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group B) | 15 A | |
| Rated voltage (UL 1059, use group C) | 150 V | |
| Rated current (UL 1059, use group C) | 15 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Width | 55.84 mm | |
| Height | 19 mm | |
| Height from mounting surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Solder pin length | 4.7 mm | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| PCB drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Maximum PCB thickness | 1.5 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Material group | I | |
| Temperature limit range | −60 to +105 °C | |
| Processing temperature range | −35 to +60 °C | |
| Weight | Approximately 11.7 g | |
| RoHS compliance | Compliant, without exemption | |
| Country of origin | Germany | |
| GTIN | 4044918283205 | |
| Manufacturer standard pack quantity | 50 pieces |
The WAGO 231-638/023-000 is an 8-pole feed-through PCB terminal block designed to connect external electrical conductors directly to printed circuit boards. It is particularly suitable for industrial control panels, front-panel wiring connections, automation equipment and OEM electronic assemblies.
The terminal block features 8 poles with 5.08 mm contact spacing, providing eight independent conductor connection points and eight corresponding through-hole solder contacts for PCB integration.
The WAGO 231-638/023-000 has an IEC rated current of 16 A. Its IEC rated voltage is 320 V for overvoltage category III and 630 V for overvoltage category II, pollution degree 2. The applicable rating depends on the installation conditions and relevant electrical standards.
The terminal block supports solid and fine-stranded conductors from 0.08–2.5 mm² (28–14 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm². The specified conductor stripping length is 8–9 mm.
The WAGO 231-638/023-000 uses through-hole technology (THT), with eight solder pins for direct PCB connection. It also incorporates a mounting flange and clamping collar for panel and feed-through installation, including suitable flush or protruding enclosure arrangements. The maximum specified PCB thickness is 1.5 mm.
WAGO 231 Series PCB terminal blocks provide dependable wire-to-board connection solutions for industrial automation, machine building and electronic control systems. The WAGO 231-638/023-000 combines eight connection positions, proven CAGE CLAMP® spring pressure termination, through-hole PCB contacts and practical front-panel feed-through mounting features to support efficient wiring and reliable electrical integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.