Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.16
The WAGO 231-638/019-000/050-000 is an 8-pole male pluggable electrical connector from the WAGO 231 Series MCS MIDI Classic family. Designed for industrial electrical interconnections, it provides a practical solution for connecting multiple conductors through a compact, detachable interface. The connector belongs to a range known for its 5.08 mm contact pitch and reliable CAGE CLAMP® spring pressure connection technology.
This configuration is associated with the 231-638/019-000 mounting-flange design, which incorporates a clamping collar for suitable panel and equipment mounting arrangements. Its eight connection positions make it particularly useful for industrial control systems, modular machinery, cable assemblies and electrical equipment requiring organised multi-circuit connections.
The full part number includes the additional /050-000 variant suffix. While the corresponding standard 231-638/019-000 connector is documented as an orange, 8-pole male connector with CAGE CLAMP® termination and a mounting flange, the precise effect of the /050-000 suffix has not been independently confirmed. Electrical ratings, conductor limits and any variant-specific construction details should therefore be checked against the manufacturer's documentation for the complete part number before final equipment design.
The WAGO 231-638/019-000/050-000 belongs to the MCS MIDI Classic connector family, which uses CAGE CLAMP® spring pressure termination to connect electrical conductors without conventional screw terminals. In the standard connector configuration, an operating tool opens the spring clamp so that a prepared conductor can be inserted and securely retained when the clamp is released.
The 8-pole arrangement provides eight separate electrical connection positions at a nominal 5.08 mm pitch. This makes the connector suitable for applications where several control, signal or appropriately rated power circuits must be connected through a single mating interface.
The /019-000 configuration is associated with a mounting flange and clamping collar. These mechanical features are useful when a connector must be supported at an equipment panel or mounting location rather than relying solely on the attached conductors. Installation should follow the applicable manufacturer's dimensional drawing and mounting instructions.
The additional /050-000 suffix distinguishes this product from the standard 231-638/019-000 version. Because the exact suffix-specific characteristics have not been confirmed, it should not automatically be assumed that every electrical, material or dimensional specification published for the standard version applies unchanged to this variant.
Compatible mating connectors must be selected by considering pole count, contact pitch, mechanical keying, coding and any variant-specific features. The WAGO MCS connector system is not intended for load-breaking operation: connectors must not be connected or disconnected while live or under load. Equipment design should also prevent accessible male contacts from remaining energised when unmated.
| Manufacturer | WAGO |
|---|---|
| Manufacturer part number | 231-638/019-000/050-000 |
| Product series | 231 Series – MCS MIDI Classic |
| Product category | Industrial pluggable electrical connector |
| Connector gender | Male |
| Connector configuration | 1-conductor male connector system |
| Number of poles | 8 |
| Number of conductor connection positions | 8 |
| Contact pitch | 5.08 mm |
| Connection principle | Spring pressure termination |
| Connection technology | CAGE CLAMP® |
| Conductor actuation | Operating tool |
| Mounting configuration | Mounting flange with clamping collar, based on the corresponding /019-000 design |
| Connector system | MCS MIDI Classic |
| Connection applications | Wire-to-wire and board-to-wire with compatible mating components |
| Variant suffix | /050-000 |
| Variant-specific electrical ratings | Not independently verified for the complete part number |
| Variant-specific conductor cross-section | Not independently verified for the complete part number |
| Variant-specific dimensions | Refer to the manufacturer's drawing for the complete part number |
| Variant-specific contact finish | Confirmation required |
| Variant-specific housing colour | Confirmation required |
| Manufacturer documentation | Verify the full 231-638/019-000/050-000 designation before specifying electrical or mechanical limits |
The WAGO 231-638/019-000/050-000 is an 8-pole male pluggable electrical connector intended for industrial wiring and equipment interconnections. It is suitable for applications such as automation cabinets, modular machinery and electrical control equipment when used with compatible mating components.
The connector has 8 poles with a nominal 5.08 mm contact pitch, providing eight separate connection positions in a compact pluggable connector arrangement.
The part number incorporates the /019-000 mounting-flange configuration, which is associated with a clamping collar for suitable panel mounting arrangements. The exact mounting dimensions and any differences introduced by the /050-000 suffix should be confirmed using documentation for the complete part number.
The /050-000 suffix identifies a specific variant of the WAGO 231-638/019-000 connector. Its precise effect on the product's construction, materials or technical specifications has not been independently verified, so the complete manufacturer part number should be checked before assuming equivalence with the standard version.
The standard WAGO 231-638/019-000 connector is documented with an IEC rated current of 12 A and conductor compatibility from 0.08–2.5 mm². However, these figures have not been independently confirmed for the complete 231-638/019-000/050-000 variant and should be verified against its specific manufacturer documentation before use.
WAGO MCS MIDI Classic connectors are designed to provide practical, dependable interconnections for industrial automation, machine building and electrical control equipment. The WAGO 231-638/019-000/050-000 offers an 8-pole connector arrangement associated with CAGE CLAMP® spring pressure technology and a mounting-flange configuration, supporting organised wiring and modular equipment integration when selected and installed according to its full manufacturer specification.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.