Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.48
The WAGO 231-637/023-000 is a 7-pole PCB terminal block with clamping collar and mounting flange, designed for dependable conductor-to-PCB connections in industrial automation, electrical control equipment and electronic assemblies. Part of the WAGO MCS MIDI Classic 231 Series, this terminal block combines compact construction, through-hole solder connections and proven CAGE CLAMP® spring pressure termination technology.
Featuring 5.08 mm pin spacing and seven independent connection points, the WAGO 231-637/023-000 enables multiple electrical circuits to be connected to a printed circuit board through one compact terminal assembly. Its 16 A IEC rated current, 320 V IEC rated voltage under category III conditions and conductor capacity of 0.08–2.5 mm² make it suitable for a broad range of industrial control and electronic equipment applications.
The connector incorporates through-hole technology (THT) with angled solder contacts, alongside a mounting flange for mechanically supported panel and feed-through installation. Its orange polyamide housing, tin-plated copper contacts and tool-operated CAGE CLAMP® terminals provide a practical combination of electrical performance, reliable conductor retention and straightforward equipment integration.
The WAGO 231-637/023-000 is engineered to provide secure conductor-to-PCB connections in industrial electronic equipment. Its CAGE CLAMP® spring pressure technology maintains consistent contact force on correctly prepared conductors, helping reduce the risk of loose terminations and supporting dependable electrical continuity in machinery and control systems.
The through-hole solder contacts establish a permanent electrical interface with the printed circuit board, while the mounting flange and clamping collar provide mechanical support for panel and feed-through installations. This combination makes the terminal block particularly useful for industrial control electronics, modular equipment assemblies and systems requiring accessible field wiring. Appropriate PCB design, soldering procedures and electrical isolation are essential for safe installation.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 7 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Part number | 231-637/023-000 | |
| Series | MCS MIDI Classic 231 | |
| Product type | PCB terminal block with clamping collar | |
| Connector configuration | 1-conductor PCB terminal strip | |
| Number of conductor connection points | 7 | |
| Number of electrical potentials | 7 | |
| Number of levels | 1 | |
| Pin spacing | 5.08 mm | |
| Connection technology | CAGE CLAMP® | |
| Connection method | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group C) | 150 V | |
| Rated current (UL 1059, Use Group C) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| PCB contact technology | Through-hole technology (THT) | |
| PCB contact arrangement | Single row, in-line | |
| Number of solder pins per potential | 1 | |
| Solder pin length | 4.7 mm | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| PCB drill-hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Mounting type | Mounting flange | |
| Mounting configuration | Panel mounting / feed-through mounting | |
| Specified panel thickness | 1.5 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin-plated | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Material group | I | |
| Temperature limit range | −60 to +105 °C | |
| Dimensions (W × H × D) | 50.76 × 19 × 19.1 mm | |
| Height from mounting surface | 14.3 mm | |
| Weight | Approximately 10.354 g | |
| Fire load | 0.167 MJ | |
| Packaging unit | 50 pieces | |
| GTIN / EAN | 4044918283199 | |
| Country of origin | Germany |
The WAGO 231-637/023-000 is a seven-pole PCB terminal block designed to connect electrical conductors to printed circuit boards in industrial automation systems, control panels and electronic equipment.
The terminal block has 7 poles, providing seven separate conductor connection points and seven independent electrical potentials.
The terminal block has a 16 A IEC rated current. Its IEC rated voltage is 320 V under overvoltage category III conditions or 630 V under overvoltage category II, pollution degree 2 conditions.
The terminal block accepts solid and fine-stranded copper conductors from 0.08–2.5 mm², equivalent to 28–14 AWG, using CAGE CLAMP® spring pressure connection technology.
The terminal block has a 5.08 mm pin spacing, allowing seven conductor connections to be arranged compactly along a printed circuit board.
The terminal block uses through-hole PCB solder contacts and incorporates a mounting flange with clamping collar for mechanically supported panel or feed-through installation.
The terminal block uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors using a tool-operated spring clamp rather than conventional screw-terminal tightening.
WAGO PCB terminal blocks are widely used by electrical engineers, industrial automation specialists and OEM equipment manufacturers for dependable conductor termination and efficient circuit board integration. The WAGO 231-637/023-000 combines seven-pole connectivity, a 16 A IEC rated current, CAGE CLAMP® technology and secure mounting features to support reliable electrical connections in industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.