Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.48
The WAGO 231-637/017-000 is a high-quality 7-pole through-panel PCB terminal block designed for dependable electrical connections between external wiring and printed circuit boards. Part of the established WAGO 231 Series, this terminal block combines a compact 5.08 mm contact pitch with proven CAGE CLAMP® spring pressure connection technology for secure, screwless conductor termination.
Featuring angled through-hole solder contacts and an integrated mounting flange with clamping collar, the WAGO 231-637/017-000 is particularly suitable for industrial electronic equipment, control panels and feed-through installations. Its seven independent conductor connection points provide an organised interface for multiple electrical circuits, while the spring pressure termination system simplifies wiring and maintenance.
With an IEC rated current of 16 A, rated voltages of 320 V or 630 V depending on installation conditions, and conductor compatibility up to 2.5 mm², this orange PCB terminal block offers a practical solution for industrial electronics. Its through-hole technology (THT), compact construction and integrated mounting features make it particularly useful for OEM equipment manufacturers and industrial automation applications.
The WAGO 231-637/017-000 combines WAGO's established CAGE CLAMP® spring pressure technology with a soldered printed circuit board interface. Conductors are secured by spring clamping elements rather than conventional screw terminals, helping maintain consistent contact pressure and providing dependable electrical connections in industrial equipment.
Its 7-pole configuration with 5.08 mm contact spacing allows seven separate electrical circuits to connect directly to a PCB. Each conductor connection corresponds to an individual solder pin, providing a convenient interface between external wiring and electronic circuitry.
The integrated mounting flange and clamping collar make this terminal block particularly useful for panel-mounted and feed-through connections. The arrangement allows external conductors to connect to a PCB assembly positioned near an enclosure opening while providing mechanical support through the mounting features.
The connector uses angled THT solder contacts with a specified solder pin length of 4.7 mm. The solder pin cross-section is 0.8 × 1.3 mm, with a recommended PCB drilled hole diameter of 1.8 mm and a positive tolerance of 0.1 mm. These dimensions should be considered when designing the PCB footprint and manufacturing process.
Unlike the standard WAGO 231-637 male pluggable connector, the 231-637/017-000 is a fixed PCB terminal block rather than a detachable plug. It is intended to provide a permanent soldered connection to the PCB while allowing external conductors to be installed or removed using the CAGE CLAMP® operating mechanism.
The complete electrical assembly must be designed within the connector's specified limits. PCB track sizing, conductor selection, solder joint quality, enclosure clearances and installation conditions should all be considered when determining the permissible operating current and voltage.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 7 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series | |
| Manufacturer part number | 231-637/017-000 | |
| Product type | Through-panel PCB terminal block | |
| Connection type | Wire-to-board terminal connection | |
| Number of connection points | 7 | |
| Number of potentials | 7 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Contact pitch | 5.08 mm | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation method | Operating tool | |
| PCB mounting technology | Through-hole technology (THT) | |
| PCB solder contact type | Angled solder pins | |
| PCB solder pin arrangement | In-line | |
| Number of solder pins per potential | 1 | |
| Total number of solder pins | 7 | |
| Mounting type | Mounting flange with clamping collar | |
| Mounting applications | Panel mounting and feed-through mounting | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Width | 50.76 mm | |
| Height | 19 mm | |
| Height from PCB surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Solder pin length | 4.7 mm | |
| Solder pin cross-section | 0.8 × 1.3 mm | |
| PCB drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Maximum housing sheet thickness | 1.5 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Material group | I | |
| Temperature limit range | −60 to +105 °C | |
| Country of origin | Germany | |
| GTIN | 4044918283175 | |
| Manufacturer standard pack quantity | 50 pieces |
The WAGO 231-637/017-000 is a 7-pole through-panel PCB terminal block designed to connect external electrical conductors directly to printed circuit boards. It is suitable for industrial automation, electronic control equipment, machinery and panel-mounted electrical assemblies.
The terminal block features 7 poles with 5.08 mm contact spacing, providing seven independent conductor connection points and seven corresponding through-hole solder contacts for PCB integration.
The WAGO 231-637/017-000 has an IEC rated current of 16 A. Its IEC rated voltage is 320 V for overvoltage category III and 630 V for overvoltage category II, pollution degree 2. The applicable rating depends on installation conditions and relevant electrical standards.
The terminal block accepts solid and fine-stranded conductors from 0.08–2.5 mm² (28–14 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm². The specified conductor stripping length is 8–9 mm.
The WAGO 231-637/017-000 uses through-hole technology (THT), with seven angled solder pins for direct PCB mounting. It also incorporates a mounting flange with clamping collar for suitable panel and feed-through applications. The maximum specified housing sheet thickness is 1.5 mm.
WAGO 231 Series PCB terminal blocks provide dependable wire-to-board connection solutions for industrial automation, machine building and electronic control systems. The WAGO 231-637/017-000 combines a compact 7-pole design, proven CAGE CLAMP® spring pressure termination, angled through-hole solder contacts and practical flange mounting to support efficient wiring and reliable electrical integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.