Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.21
The WAGO 231-636/017-000 is a high-quality 6-pole through-panel PCB terminal block designed for secure electrical connections between external wiring and printed circuit boards. Part of the established WAGO 231 Series MCS MIDI Classic range, this orange terminal block combines a compact 5.08 mm contact pitch with proven CAGE CLAMP® spring pressure connection technology.
Featuring an integrated mounting flange and through-hole solder contacts, the WAGO 231-636/017-000 is particularly suitable for industrial electronics, control panels and equipment requiring reliable through-panel electrical connections. Its six independent conductor connection points simplify the organisation of multiple circuits, while the spring pressure termination system provides secure connections without conventional screw tightening.
With an IEC rated current of 16 A, a rated voltage of 320 V under overvoltage category III conditions, and support for conductors up to 2.5 mm², this PCB terminal block offers a dependable solution for industrial electronic assemblies. Its compact construction, through-hole technology (THT) and integrated mounting features make it an excellent choice for OEM equipment manufacturers and industrial automation applications.
The WAGO 231-636/017-000 combines the reliability of WAGO's established CAGE CLAMP® spring pressure technology with a soldered printed circuit board interface. Conductors are securely retained by spring clamping elements, helping maintain consistent electrical contact without the need for conventional screw terminals.
Its 6-pole configuration with 5.08 mm contact spacing allows six independent electrical circuits to be connected directly to a PCB. Each conductor connection corresponds to a dedicated through-hole solder pin, providing a practical interface between external wiring and electronic circuitry.
The integrated mounting flange makes this terminal block particularly suitable for panel-mounted and feed-through electrical connections. This arrangement is useful in industrial equipment where electrical conductors must pass between enclosure compartments or connect to PCB assemblies positioned near a panel opening.
The connector features six in-line THT solder contacts with a solder pin length of 4.7 mm. The recommended PCB drilled hole diameter is 1.8 mm with a positive tolerance of 0.1 mm, and the specified maximum PCB thickness is 1.5 mm. These dimensions support accurate PCB footprint design and dependable assembly.
The WAGO 231-636/017-000 is intended for installation within its specified electrical, mechanical and thermal limits. PCB track sizing, conductor selection, solder joint integrity and enclosure design should all be considered when determining the operating conditions of the completed equipment.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 6 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series – MCS MIDI Classic | |
| Manufacturer part number | 231-636/017-000 | |
| Product type | Through-panel PCB terminal block | |
| Connection type | Wire-to-board terminal connection | |
| Number of connection points | 6 | |
| Number of potentials | 6 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Contact pitch | 5.08 mm | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation method | Operating tool | |
| Conductor entry direction relative to PCB | 0° | |
| PCB mounting technology | Through-hole technology (THT) | |
| PCB solder pin arrangement | In-line | |
| Number of solder pins per potential | 1 | |
| Total number of solder pins | 6 | |
| Mounting type | Mounting flange | |
| Mounting applications | Panel mounting and feed-through mounting | |
| Suitable for through-panel applications | Yes | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Width | 45.28 mm | |
| Height | 19 mm | |
| Height from PCB surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Solder pin length | 4.7 mm | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| PCB drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Maximum PCB thickness | 1.5 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Material group | I | |
| Temperature limit range | −60 to +105 °C | |
| Weight | Approximately 9 g | |
| Country of origin | Germany | |
| GTIN | 4044918260091 |
The WAGO 231-636/017-000 is a 6-pole through-panel PCB terminal block designed to connect electrical conductors directly to printed circuit boards. It is suitable for industrial automation, electronic control equipment, machinery and panel-mounted electrical assemblies.
The terminal block features 6 poles with 5.08 mm contact spacing, providing six independent conductor connection points and six corresponding through-hole solder contacts for PCB integration.
The WAGO 231-636/017-000 has an IEC rated current of 16 A. Its IEC rated voltage is 320 V for overvoltage category III and 630 V for overvoltage category II, pollution degree 2. The applicable rating depends on the installation conditions and relevant electrical standards.
The terminal block supports solid and fine-stranded conductors from 0.08–2.5 mm² (28–14 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm². The specified conductor stripping length is 8–9 mm.
The WAGO 231-636/017-000 uses through-hole technology (THT), with six solder pins for PCB mounting. It also incorporates an integrated mounting flange for suitable panel and feed-through applications. The maximum specified PCB thickness is 1.5 mm.
WAGO 231 Series MCS MIDI Classic terminal blocks provide dependable wire-to-board connection solutions for industrial automation, machine building and electronic control systems. The WAGO 231-636/017-000 combines a compact 6-pole design, proven CAGE CLAMP® spring pressure termination, through-hole PCB contacts and practical flange mounting to support efficient wiring and reliable electrical integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.