Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.77
The WAGO 231-635/019-000/050-000 is a 5-pole, 1-conductor male pluggable connector from the WAGO MCS MIDI Classic 231 Series. Designed for detachable electrical connections in industrial automation, control panels and machinery, it provides a compact multi-pole interface for connecting compatible electrical assemblies.
Based on the 231-635/019-000 configuration, this connector belongs to WAGO's established spring pressure connection system, featuring a nominal 5.08 mm contact pitch and a mounting-flange arrangement. The 231 Series uses CAGE CLAMP® technology in its conductor-termination configurations, allowing conductors to be secured without conventional terminal screw tightening.
The additional /050-000 suffix identifies a specific manufacturer ordering variant. Although the complete part number is independently listed as a WAGO 1-conductor male connector, the exact significance of this suffix has not been established from a manufacturer datasheet. The WAGO 231-635/019-000/050-000 is therefore best selected using its complete ordering designation, with the variant-specific electrical, mechanical and mating specifications confirmed before installation.
Technical selection note: The exact WAGO part number is identifiable as a 1-conductor male connector. The numerical ratings and material characteristics above describe the 231-635/019-000 base configuration and must not be treated as independently verified specifications for the additional /050-000 variant. Confirm the complete manufacturer's datasheet before selecting conductor sizes, electrical protection, mounting hardware or mating connectors.
The WAGO MCS MIDI Classic 231 Series provides modular electrical connections for industrial control systems, machinery and electronic equipment. A compatible male and female connector arrangement allows electrical assemblies to be connected and disconnected through a defined interface, helping simplify wiring organisation and equipment maintenance.
WAGO's CAGE CLAMP® spring pressure technology, used throughout applicable configurations of the series, maintains electrical contact pressure on correctly prepared conductors without relying on conventional terminal screw tightening. This supports efficient assembly and consistent installation practices when the conductor termination and application requirements are followed.
The 231-635/019-000/050-000 combines the five-pole MCS connector format with a specific manufacturer ordering variation. Because suffixes can identify important configuration differences, engineers should verify the complete part number when selecting mating connectors, assessing mechanical mounting and determining suitability for an existing industrial installation.
| Manufacturer | WAGO |
|---|---|
| Series | MCS MIDI Classic 231 Series |
| Manufacturer part number | 231-635/019-000/050-000 |
| Base configuration | 231-635/019-000 |
| Product type | 1-conductor male pluggable connector |
| Connector gender | Male |
| Number of poles | 5 |
| Nominal contact pitch of base family | 5.08 mm |
| Base-series connection technology | CAGE CLAMP® |
| Base-series solid conductor range | 0.08–2.5 mm² |
| Base-series fine-stranded conductor range | 0.08–2.5 mm² |
| Base-series stripping length | 8–9 mm |
| Base-series IEC rated current | 12 A |
| Base-series IEC rated voltage (III/3) | 320 V |
| Base-series IEC rated voltage (II/2) | 630 V |
| Base-series rated impulse voltage | 4 kV |
| Base mounting arrangement | Mounting flange |
| Base-series housing material | Polyamide 66 (PA 66) |
| Base-series housing colour | Orange |
| Manufacturer variant designation | /050-000 |
| Connection system | WAGO Multi Connection System (MCS) |
| Product family | Pluggable terminal block connectors |
The WAGO 231-635/019-000/050-000 is a 5-pole, 1-conductor male pluggable connector intended for compatible industrial electrical assemblies, including control equipment, machinery and modular wiring systems.
The connector has 5 poles. Its underlying MCS MIDI Classic configuration uses a nominal 5.08 mm contact pitch, although the precise geometry of the complete /050-000 variant should be confirmed before mating-component selection.
The /050-000 suffix identifies a specific manufacturer ordering variant of the WAGO 231-635/019-000 connector. Its precise technical significance has not been independently confirmed from an exact WAGO datasheet, so the complete part number should be used when checking compatibility.
The standard 231-635/019-000 base configuration is associated with a 0.08–2.5 mm² conductor range and an IEC rated current of 12 A. These values must be verified for the complete 231-635/019-000/050-000 variant before installation.
Not without a compatibility check. Although the parts share the same base designation, the additional /050-000 suffix may indicate a configuration difference. Confirm the mating interface, mounting arrangement, conductor requirements and electrical ratings before substitution.
WAGO MCS MIDI Classic connector systems support industrial automation engineers, machine builders and control panel manufacturers with modular connection technology for organised wiring, equipment integration and serviceable electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.