Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.90
The WAGO 231-635/017-000 is a robust 5-pole PCB terminal block with CAGE CLAMP® spring pressure connections, designed for reliable wire-to-board connections in industrial automation, electronic equipment and electrical control systems. Part of the established WAGO 231 Series MCS MIDI Classic range, this terminal block combines a compact 5.08 mm contact pitch with a practical through-hole PCB mounting arrangement.
Featuring an integrated clamping collar and mounting flange, the WAGO 231-635/017-000 is suitable for panel and feed-through installations as well as printed circuit board assemblies. Its CAGE CLAMP® technology allows conductors to be connected without conventional screw terminals, providing secure spring pressure contact for dependable electrical connections.
With a 16 A rated current, a 320 V rated voltage under IEC overvoltage category III conditions, and support for solid and fine-stranded conductors up to 2.5 mm², this orange 5-pole PCB terminal block is well suited to industrial electronics and control equipment. Its combination of through-hole solder contacts, secure mounting features and spring pressure termination makes it a practical solution for equipment manufacturers requiring dependable PCB-to-wire connections.
The WAGO 231-635/017-000 combines the reliability of WAGO's CAGE CLAMP® spring pressure connection technology with a soldered PCB interface. Conductors are retained by a spring clamping mechanism, helping maintain consistent electrical contact without the need for conventional screw terminals. This is particularly useful in industrial equipment where wiring efficiency and long-term connection reliability are important.
Unlike the standard WAGO 231-635 pluggable male connector, the 231-635/017-000 is a PCB terminal block with through-hole solder contacts. Its five solder pins connect the five conductor positions directly to corresponding PCB circuits, making it suitable for electronic assemblies that require external wiring connections.
The integrated mounting flange and clamping collar allow the terminal block to be incorporated into suitable panel and feed-through arrangements. This helps support the assembly mechanically and provides a convenient interface between wiring and the printed circuit board. The connector's 5.08 mm pitch offers a practical balance between compact PCB layout and conductor termination space.
The terminal block is intended for installation within its specified electrical, mechanical and thermal limits. PCB track sizing, solder joint integrity, conductor selection and enclosure design must all be considered when determining the permissible operating conditions of the complete assembly.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 5 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series – MCS MIDI Classic | |
| Manufacturer part number | 231-635/017-000 | |
| Product type | PCB terminal block | |
| Connection type | Wire-to-board terminal connection | |
| Number of connection points | 5 | |
| Number of potentials | 5 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Contact pitch | 5.08 mm | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation method | Operating tool | |
| PCB mounting technology | Through-hole technology (THT) | |
| PCB solder pin arrangement | In-line | |
| Number of solder pins per potential | 1 | |
| Mounting type | Mounting flange with clamping collar | |
| Mounting applications | Panel mounting and feed-through mounting | |
| Suitable for through-panel applications | Yes | |
| Rated current | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Width | 40.2 mm | |
| Height | 19 mm | |
| Height from PCB surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Solder pin length | 4.7 mm | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| PCB drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Maximum PCB thickness | 1.5 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Material group | I | |
| Temperature limit range | −60 to +105 °C | |
| Weight | Approximately 7.7 g | |
| GTIN | 4044918283083 |
The WAGO 231-635/017-000 is a 5-pole PCB terminal block designed to connect electrical conductors directly to printed circuit boards. It is commonly suited to industrial automation, electronic control equipment and machinery, including suitable panel and feed-through installations.
The terminal block features 5 poles with 5.08 mm contact spacing, providing five separate conductor connection points and five corresponding through-hole solder contacts for PCB integration.
The WAGO 231-635/017-000 has a 16 A rated current. Its IEC rated voltage is 320 V for overvoltage category III and 630 V for overvoltage category II, pollution degree 2. The applicable rating depends on the installation conditions and relevant electrical standards.
The connector accepts solid and fine-stranded conductors from 0.08–2.5 mm² (28–14 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm². The specified conductor stripping length is 8–9 mm.
The WAGO 231-635/017-000 uses through-hole technology (THT), with five solder pins for PCB mounting. It also incorporates a mounting flange and clamping collar for suitable panel and feed-through applications. The maximum specified PCB thickness is 1.5 mm.
WAGO 231 Series MCS MIDI Classic terminal blocks provide dependable wire-to-board connection solutions for industrial automation, machine building and electronic control systems. The WAGO 231-635/017-000 combines a compact 5-pole design, CAGE CLAMP® spring pressure termination, through-hole PCB contacts and practical flange mounting to support efficient wiring and reliable electrical integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.