Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.18
The WAGO 231-634 is a 4-pole pluggable male connector from the WAGO MCS MIDI Classic 231 Series. Featuring CAGE CLAMP® spring pressure connection technology, a 5.08 mm pin spacing and an orange insulating housing, this connector provides a compact, detachable electrical interface for industrial control panels, automation equipment and modular machinery.
Designed for secure conductor termination, the WAGO 231-634 uses WAGO's established CAGE CLAMP® technology to connect conductors without conventional terminal screws. Its four-pole arrangement provides individual connection positions for multiple electrical circuits, helping simplify cable preparation, equipment assembly and maintenance.
The standard 231-634 version features a pluggable connection without an integrated locking mechanism. Unlike mounting-specific variants within the same product family, it is suited to free-hanging connection arrangements. With a nominal conductor cross-section of 2.5 mm², the connector provides a practical solution for electrical engineers, panel builders and OEM manufacturers requiring dependable pluggable connections.
Pluggable connection systems are widely used in industrial automation to provide detachable electrical interfaces between machinery, control panels and electronic equipment. The WAGO MCS MIDI Classic range combines spring pressure conductor termination with modular connector arrangements, supporting efficient wiring and serviceable equipment designs.
The WAGO 231-634 provides four connection positions in a compact male connector suitable for compatible wire-to-wire and equipment connection arrangements. Its CAGE CLAMP® technology supports dependable conductor retention, while the pluggable interface allows connected equipment sections to be separated for maintenance or replacement. The connector must be used with a compatible mating component and within the electrical ratings specified for the complete connection assembly. It should not be connected or disconnected while energised or under load unless the complete assembly is specifically approved for that operation.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 4 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Model | 231-634 | |
| Manufacturer part number | 231-634 | |
| Product type | 1-conductor pluggable male connector | |
| Connector configuration | 4-pole | |
| Conductors per pole | 1 | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Spring pressure connection | |
| Pin spacing | 5.08 mm | |
| Nominal conductor cross-section | 2.5 mm² | |
| Plug-in connection locking | None | |
| Mounting arrangement | Standard free-hanging connector configuration | |
| Overall connector length (L) | 23.44 mm | |
| Dimension L1 | 21.74 mm | |
| Dimension L2 | 22.24 mm | |
| Product category | Pluggable Connection Systems |
The WAGO 231-634 is a 4-pole pluggable male connector used to create detachable electrical connections in industrial control panels, machinery and automation equipment. It belongs to the WAGO MCS MIDI Classic 231 Series and features CAGE CLAMP® spring pressure connection technology.
The WAGO 231-634 has 4 poles, providing four individual conductor connection positions with 5.08 mm pin spacing.
The connector has a nominal conductor cross-section of 2.5 mm². The permitted conductor types and connection ranges should be checked against WAGO's technical documentation before installation.
No. The standard WAGO 231-634 has no integrated plug-in locking mechanism. WAGO offers other variants within the same connector family with different mounting and retention arrangements.
The connector has an overall length of 23.44 mm, calculated using WAGO's dimensional formula for the four-pole version. The corresponding L1 and L2 dimensions are 21.74 mm and 22.24 mm, respectively. The connector must be paired with a suitable mating component.
WAGO MCS MIDI Classic pluggable connectors provide industrial automation engineers, electrical panel builders and OEM equipment manufacturers with practical solutions for secure conductor termination and modular electrical connections. The WAGO 231-634 combines four connection poles, 5.08 mm spacing and CAGE CLAMP® technology in a compact orange connector designed for dependable industrial electrical interconnections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.