Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.63
The WAGO 231-634/114-000 is a 4-pole pluggable male connector with an integrated snap-in flange, designed for secure electrical connections in industrial automation, control panels and machinery. Part of the WAGO MCS MIDI Classic 231 Series, this orange connector combines CAGE CLAMP® spring pressure connection technology, 5.08 mm pin spacing and a mechanically supported feed-through mounting arrangement.
The connector provides four independent electrical connection positions, each accommodating one conductor. Its snap-in flange enables convenient installation through suitable panel openings, while the integrated anti-rotation protection helps maintain connector positioning. The design supports panel sheet thicknesses from 0.5–3 mm, making it suitable for a range of industrial equipment housings and electrical enclosures.
With a nominal conductor cross-section of 2.5 mm², an IEC rated current of 12 A and compatibility with solid and fine-stranded conductors from 0.08–2.5 mm², the WAGO 231-634/114-000 provides a versatile connection solution. Its tool-actuated CAGE CLAMP® terminals, tin-plated copper contacts and durable polyamide housing support efficient wiring, modular assembly and maintenance.
Pluggable connection systems provide an efficient way to connect electrical circuits between industrial control panels, machinery modules and electronic equipment. WAGO's MCS MIDI Classic range combines spring pressure conductor termination with modular connector arrangements, helping simplify equipment assembly, cable preparation and maintenance.
The WAGO 231-634/114-000 is particularly suited to applications requiring a mechanically secured connector interface through an equipment panel. Its snap-in flange and anti-rotation protection support stable installation, while CAGE CLAMP® technology facilitates conductor termination without conventional screws. The connector supports wire-to-wire and board-to-wire arrangements when paired with compatible WAGO mating components. As specified for WAGO MCS connectors, it has no load-breaking capacity and must not be connected or disconnected while live or under load. Equipment design should also prevent accessible male contacts from remaining energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 4 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Model | 231-634/114-000 | |
| Manufacturer part number | 231-634/114-000 | |
| Product type | 1-conductor pluggable male connector | |
| Connector configuration | 4-pole, single level | |
| Number of connection points | 4 | |
| Number of potentials | 4 | |
| Number of connection types | 1 | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Spring pressure connection | |
| Actuation method | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Conductor entry direction relative to mating direction | 0° | |
| Pin spacing | 5.08 mm | |
| Nominal conductor cross-section | 2.5 mm² | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| Mounting type | Snap-in flange / feed-through mounting | |
| Anti-rotation protection | Yes | |
| Housing sheet thickness | 0.5–3 mm | |
| Variable coding | Yes | |
| Mismating protection | No | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature limits | -60 to +100 °C | |
| Width | 41.32 mm | |
| Height | 17.5 mm | |
| Depth | 27.5 mm | |
| Weight | Approximately 8.6 g | |
| Country of origin | Germany | |
| GTIN | 4050821279761 | |
| Applicable standards | IEC/EN 61984, UL 1059 and UL 1977 | |
| Product category | Pluggable Connection Systems |
The WAGO 231-634/114-000 is a 4-pole pluggable male connector with a snap-in flange, designed for detachable electrical connections in industrial control panels, machinery and automation equipment. Its CAGE CLAMP® terminals provide screwless conductor termination, while the snap-in flange supports mechanically secured feed-through mounting.
The connector has 4 poles, providing four independent conductor connection positions with 5.08 mm pin spacing.
The connector accepts solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², and the specified stripping length is 8–9 mm.
The connector has an IEC rated current of 12 A and an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2 conditions. Under UL 1977, its ratings are 15 A and 600 V. The applicable rating depends on the installation conditions, approval category and compatible mating components.
The connector features an integrated snap-in flange designed for feed-through mounting in compatible panels. It supports housing sheet thicknesses from 0.5–3 mm and includes anti-rotation protection to help maintain its installed position. The panel opening must follow WAGO's specified mounting dimensions.
WAGO MCS MIDI Classic pluggable connectors provide electrical panel builders, automation engineers and OEM equipment manufacturers with practical solutions for secure conductor termination and modular electrical connections. The WAGO 231-634/114-000 combines four connection poles, 5.08 mm spacing, CAGE CLAMP® technology and a snap-in flange with anti-rotation protection for organised, serviceable industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.