Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.62
The WAGO 231-634/023-000 is a 4-pole through-panel PCB terminal block from the WAGO 231 Series, designed for reliable conductor connections in industrial electronics, control panels and equipment assemblies. Featuring CAGE CLAMP® spring pressure connection technology, a 5.08 mm pin spacing and integrated mounting flanges, it provides a practical solution for connecting field wiring to printed circuit boards and panel-mounted electronic equipment.
Designed for solid and fine-stranded copper conductors from 0.08–2.5 mm², the WAGO 231-634/023-000 allows conductors to be terminated without conventional terminal screws. Its operating-tool-actuated CAGE CLAMP® system maintains spring pressure on correctly prepared conductors, while the through-hole solder contacts provide a permanent electrical interface to the PCB.
The connector features an orange PA 66 housing, four independent connection positions and a mounting-flange arrangement suitable for through-panel installation. With an IEC rated current of 16 A, voltage ratings up to 630 V depending on the installation category, and a compact single-row construction, the WAGO 231-634/023-000 is suited to industrial control electronics, machine building and OEM equipment requiring accessible, mechanically supported PCB wiring connections.
The WAGO 231 Series provides a practical connection system for printed circuit boards and industrial electronic equipment. The 231-634/023-000 combines four spring pressure conductor terminals with soldered PCB contacts, allowing external wiring to be connected directly to the circuit board through a compact terminal strip.
WAGO's CAGE CLAMP® spring pressure technology maintains contact pressure on correctly prepared conductors without conventional terminal screw tightening. Its operating-tool-actuated design accommodates solid and fine-stranded copper conductors, while the specified stripping length supports consistent conductor preparation during installation and maintenance.
The integrated mounting flanges distinguish this variant from standard PCB terminal strips without additional mechanical fixing provisions. They support through-panel and feed-through installations where the terminal block must be mechanically positioned in an equipment enclosure. Combined with its orange PA 66 housing, tin-plated contacts and 16 A IEC current rating, the WAGO 231-634/023-000 is suited to industrial electronics requiring accessible and mechanically supported conductor connections.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 4 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series | |
| Part number | 231-634/023-000 | |
| Product type | Through-panel PCB terminal block | |
| Connection arrangement | 1-conductor terminal strip | |
| Number of connection points | 4 | |
| Number of potentials | 4 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Pin spacing | 5.08 mm | |
| Connection technology | CAGE CLAMP® | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size range | 28–14 AWG | |
| Wire stripping length | 8–9 mm | |
| Actuation type | Operating tool | |
| Conductor connection direction relative to PCB | 0° | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, category III / pollution degree 3) | 320 V | |
| Rated voltage (IEC, category III / pollution degree 2) | 320 V | |
| Rated voltage (IEC, category II / pollution degree 2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Mounting arrangement | Mounting flange | |
| Mounting applications | Feed-through and panel mounting | |
| Suitable for through-panel applications | Yes | |
| PCB contact technology | Through-hole technology (THT) | |
| Solder pin arrangement | In-line | |
| Solder pins per potential | 1 | |
| Solder pin length | 4.7 mm | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| PCB hole diameter | 1.8 mm (+0.1 mm) | |
| Maximum PCB thickness | 1.5 mm | |
| Width | 35.12 mm | |
| Height | 19 mm | |
| Height above mounting surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Insulating material | Polyamide 66 (PA 66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Weight | Approximately 6.4 g | |
| Packaging unit | 50 pieces | |
| GTIN | 4044918283069 | |
| Product family | PCB terminal blocks |
The WAGO 231-634/023-000 is a 4-pole through-panel PCB terminal block with mounting flanges, designed for connecting external conductors to printed circuit boards in industrial control equipment, machinery and electronic assemblies.
The terminal block accepts solid and fine-stranded copper conductors from 0.08–2.5 mm². Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while those with uninsulated ferrules are supported from 0.25–2.5 mm².
The terminal block has an IEC rated current of 16 A. Its IEC rated voltage is 320 V for overvoltage category III and 630 V for category II / pollution degree 2. Under UL 1059 Use Group B, it is rated at 15 A and 300 V.
The connector uses through-hole solder contacts for PCB connection and includes mounting flanges for through-panel or feed-through installation. It is suitable for printed circuit boards up to 1.5 mm thick, with a specified solder pin length of 4.7 mm.
No. The WAGO 231-634/023-000 is a PCB terminal block with CAGE CLAMP® conductor terminals and through-hole solder contacts. It is intended to provide a direct conductor-to-PCB connection rather than a detachable male plug-and-socket interface.
WAGO 231 Series PCB terminal blocks provide industrial electronics designers, control panel manufacturers and machine builders with established spring pressure connection technology, compact PCB integration and practical mounting options for reliable equipment wiring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.