Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.33
The WAGO 231-634/018-000/050-000 is a 4-pole male pluggable electrical connector with snap-in mounting feet from the WAGO 231 Series MCS MIDI Classic range. Designed for dependable electrical interconnections in industrial equipment, this connector combines a compact 5.08 mm contact pitch with a practical mounting arrangement for machinery and control system installations.
The connector uses the established 231-634/018-000 base configuration, which WAGO identifies as a 4-pole male connector with snap-in mounting feet. Its conductor termination system is designed for secure, screwless wiring, while the detachable mating interface supports modular equipment construction, cable harness assembly and maintenance.
The /050-000 variant is also listed by industrial component suppliers as a 4-pole automotive-style male connector with snap-in feet. This makes it relevant to equipment manufacturers seeking a compact connector for organised electrical wiring. The exact electrical ratings and any special characteristics of this variant should be checked against the applicable WAGO technical documentation before installation.
The WAGO 231-634/018-000/050-000 provides a practical interface for connecting multiple conductors within industrial electrical assemblies. Its 4-pole arrangement allows four connection positions to be grouped into a single pluggable component, helping simplify cable routing and connector organisation.
The snap-in mounting feet distinguish this connector from versions without dedicated mounting features. This mechanical arrangement is useful where the connector needs to be retained in a suitable mounting location rather than left unsupported within a wiring assembly. The precise mounting method should follow the dimensional requirements of the selected connector variant.
As part of the MCS MIDI Classic range, the connector is intended to work with compatible mating components. Correct connector selection requires matching the pole count, contact pitch, connector geometry and any coding arrangements. This is especially important in equipment containing several similar-looking connectors.
The connector should be installed and serviced only under appropriately isolated electrical conditions. Pluggable electrical connectors of this type must not be treated as load-break switches, and the electrical design should prevent accessible male contacts from remaining energised when unmated.
| Manufacturer | WAGO |
|---|---|
| Manufacturer part number | 231-634/018-000/050-000 |
| Base connector | 231-634/018-000 |
| Product series | 231 – MCS MIDI Classic |
| Product category | Industrial pluggable electrical connector |
| Connector type | Male connector |
| Number of poles | 4 |
| Number of conductor connection positions | 4 |
| Contact pitch | 5.08 mm |
| Mounting arrangement | Snap-in mounting feet |
| Connection design | 1-conductor connection per pole |
| Connection system | Spring pressure conductor termination |
| Connector interface | Pluggable male contacts |
| Variant identification | /050-000 |
| Application classification | Industrial and automotive-style electrical interconnections |
| Compatible mating components | Suitable WAGO 231 Series female connectors with matching pole count, pitch and mechanical coding |
| Standard base connector colour | Orange |
| Base connector width | 23.44 mm, calculated from WAGO's published pole-spacing formula |
| Electrical current and voltage ratings | Subject to confirmation for the complete /050-000 variant and mating assembly |
| Conductor compatibility | Subject to the applicable WAGO termination specification |
The WAGO 231-634/018-000/050-000 is a 4-pole male pluggable connector designed for electrical interconnections in industrial equipment, machinery and compatible automotive-style wiring assemblies. Its snap-in mounting feet provide a practical mounting arrangement.
The connector has 4 poles with a 5.08 mm contact pitch, providing four connection positions in a compact male connector assembly.
Yes. The WAGO 231-634/018-000/050-000 belongs to the 231-634/018-000 snap-in mounting configuration. The mounting feet allow the connector to be retained in a suitable mounting arrangement, subject to the applicable installation dimensions.
The 231-634/018-000 identifies the standard 4-pole male connector with snap-in mounting feet, while 231-634/018-000/050-000 identifies a specific ordering variant. The additional suffix should not be assumed to be interchangeable with the standard version without confirming the relevant variant specifications.
No. The mating connector must have a compatible 5.08 mm pitch, four-pole configuration, contact geometry and any required mechanical coding. A suitable WAGO mating component should be selected using the manufacturer's compatibility information.
WAGO MCS MIDI Classic connectors are designed to support reliable, organised electrical interconnections in industrial machinery and automation equipment. The WAGO 231-634/018-000/050-000 combines a compact 4-pole male interface, 5.08 mm contact spacing and snap-in mounting feet for practical integration into modular electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.