Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.62
The WAGO 231-634/017-000 is a 4-pole feed-through PCB terminal block featuring CAGE CLAMP® spring pressure connection technology, 5.08 mm pin spacing and an integrated clamping collar. Part of the WAGO 231 Series, this orange terminal block provides a reliable interface between external electrical conductors and printed circuit boards in industrial automation, control equipment and electronic assemblies.
Designed for through-hole PCB mounting and panel feed-through applications, the WAGO 231-634/017-000 combines screwless conductor termination with solderable PCB contacts. Its mounting flanges and clamping collar provide mechanical support for compatible panel installations, while CAGE CLAMP® technology allows conductors to be connected without conventional terminal screws.
With an IEC rated current of 16 A, a nominal conductor cross-section of 2.5 mm² and compatibility with solid and fine-stranded conductors from 0.08–2.5 mm², this terminal block is suitable for a variety of industrial wire-to-board applications. Its compact four-pole arrangement, durable polyamide housing and tin-plated contacts make it a practical choice for PCB designers, electrical engineers and OEM equipment manufacturers.
PCB terminal blocks provide an important electrical interface between external wiring and electronic control circuits. In industrial automation equipment, they enable field conductors to connect directly to printed circuit boards, helping simplify assembly, improve wiring organisation and support efficient maintenance. WAGO CAGE CLAMP® technology uses spring pressure to retain conductors securely without conventional terminal screws.
The WAGO 231-634/017-000 combines four conductor connection positions with through-hole solder contacts and mechanically supported mounting. Its feed-through construction is particularly useful where electrical connections must be integrated into an enclosure or panel while remaining connected to a PCB. Correct installation requires the manufacturer's specified PCB footprint, suitable soldering procedures and compliance with the electrical ratings applicable to the complete circuit.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 4 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 | |
| Model | 231-634/017-000 | |
| Manufacturer part number | 231-634/017-000 | |
| Product type | Feed-through PCB terminal block | |
| Connector configuration | 4-pole, single level | |
| Number of connection points | 4 | |
| Number of potentials | 4 | |
| Number of connection types | 1 | |
| Connection technology | CAGE CLAMP® | |
| Conductor termination | Spring pressure connection | |
| Actuation method | Operating tool | |
| Pin spacing | 5.08 mm | |
| Nominal conductor cross-section | 2.5 mm² | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group C) | 15 A | |
| Rated voltage (UL 1059, Use Group C) | 150 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| PCB contact technology | Through-hole technology (THT) | |
| Solder pin arrangement | In-line across the terminal strip | |
| Number of solder pins per potential | 1 | |
| Solder pin length | 4.7 mm | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| PCB drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Maximum housing sheet thickness | 1.5 mm | |
| Mounting type | Mounting flange / feed-through panel mounting | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature limits | -60 to +105 °C | |
| Width | 35.52 mm | |
| Height | 19 mm | |
| Height from mounting surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Country of origin | Germany | |
| GTIN | 4044918283052 | |
| Product category | PCB Terminal Blocks |
The WAGO 231-634/017-000 is a 4-pole feed-through PCB terminal block designed to connect electrical conductors to printed circuit boards. It features CAGE CLAMP® spring pressure terminals, through-hole solder connections and mounting flanges with a clamping collar for compatible panel installations.
The terminal block has 4 poles, providing four independent electrical connection positions with 5.08 mm pin spacing.
The terminal block accepts solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–14 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², and the specified conductor stripping length is 8–9 mm.
The WAGO 231-634/017-000 has an IEC rated current of 16 A. Its IEC rated voltage is 630 V under overvoltage category II, pollution degree 2 conditions, and 320 V under overvoltage category III conditions. The applicable rating depends on the installation environment and circuit design.
The terminal block uses through-hole solder pins with a length of 4.7 mm. The specified PCB drilled hole diameter is 1.8 mm with a +0.1 mm tolerance. Its mounting flanges and clamping collar support mechanically secured feed-through or panel-mounted installations, with a maximum housing sheet thickness of 1.5 mm.
WAGO PCB terminal blocks provide electrical engineers, industrial automation specialists and OEM equipment manufacturers with practical solutions for secure conductor termination and printed circuit board connectivity. The WAGO 231-634/017-000 combines four connection poles, 5.08 mm spacing, CAGE CLAMP® technology, through-hole solder contacts and mechanically supported mounting for dependable industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.