Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.79
The WAGO 231-633 is a 3-pole male pluggable connector from the WAGO MCS MIDI Classic 231 Series, designed for detachable electrical connections in industrial control panels, automation equipment and machinery. Featuring CAGE CLAMP® spring pressure connection technology, a 5.08 mm pin spacing and an orange insulating housing, this connector provides a compact solution for organising three electrical circuits within a single pluggable interface.
The connector supports conductor termination using WAGO's established CAGE CLAMP® technology, with a nominal conductor capacity of up to 2.5 mm². The spring pressure connection eliminates conventional terminal screw tightening and supports efficient wiring during control panel construction, cable assembly and machinery installation. Its detachable design allows electrical assemblies to be separated using an appropriately matched mating connector.
Unlike variants featuring snap-in mounting feet or additional locking flanges, the standard WAGO 231-633 has no integrated plug-in locking mechanism. This makes it suitable for applications where a straightforward pluggable connection is required. The connector is supplied in an orange housing and belongs to WAGO's established Multi Connection System, providing a practical solution for modular industrial wiring.
Technical note: The dimensions are calculated from WAGO's published dimensional formula for the 231-633. Electrical ratings, detailed conductor ranges and other installation-specific limits should be checked against the manufacturer's current technical documentation and the selected mating connector.
The WAGO MCS MIDI Classic 231 Series provides a modular approach to industrial electrical connections. The WAGO 231-633 combines three conductor connection positions with a detachable male plug interface, allowing compatible electrical assemblies to be connected and separated without repeatedly disturbing individual conductor terminations.
WAGO's CAGE CLAMP® spring pressure connection technology uses a spring mechanism to maintain contact pressure on correctly prepared conductors. Unlike conventional screw terminals, the connection does not rely on terminal screw tightening. This supports efficient electrical assembly and consistent installation practices in control panels, industrial machinery and automation systems.
The WAGO 231-633 features a 5.08 mm pitch, an orange insulating housing and a standard connection configuration without integrated plug-in locking. These characteristics make it a practical option for modular wiring systems where a compact, detachable three-pole connection is required and the mechanical installation conditions are appropriate.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 3 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Part number | 231-633 | |
| Product type | 1-conductor male pluggable connector | |
| Connector gender | Male | |
| Number of connection positions | 3 | |
| Nominal pin spacing | 5.08 mm | |
| Connection technology | CAGE CLAMP® | |
| Nominal conductor capacity | 2.5 mm² | |
| Conductor termination | Spring pressure connection | |
| Plug-in connection locking | None | |
| Contact arrangement | Single-row, 3-pole | |
| Calculated connector length (L) | 18.36 mm | |
| Calculated dimension L1 | 16.66 mm | |
| Calculated dimension L2 | 17.16 mm | |
| Packaging unit | 100 pieces | |
| Connection system | WAGO Multi Connection System (MCS) | |
| Product family | Pluggable terminal block connectors |
The WAGO 231-633 is a 3-pole male pluggable connector designed for detachable electrical connections in industrial control panels, automation equipment and machinery.
The connector has 3 poles with a nominal 5.08 mm pin spacing, providing three connection positions within a compact pluggable interface.
The WAGO 231-633 uses CAGE CLAMP® spring pressure connection technology, allowing conductor termination without conventional terminal screws and supporting a nominal conductor capacity of up to 2.5 mm².
No. The standard WAGO 231-633 is specified without an integrated plug-in locking mechanism. Other 231 Series variants offer alternative mounting and locking arrangements.
Both connectors belong to the MCS MIDI Classic 231 Series and feature 3 poles with 5.08 mm pin spacing. The standard 231-633 has no integrated plug-in locking mechanism, whereas the 231-633/018-000 incorporates snap-in mounting feet for DIN-35 rail or panel mounting arrangements.
WAGO MCS MIDI Classic connectors support industrial automation engineers, control panel manufacturers and machine builders with reliable spring pressure conductor termination, modular electrical interfaces and convenient detachable connections for industrial equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.