Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.30
The WAGO 231-633/017-000 is a 3-pole feed-through PCB terminal block designed to provide secure electrical connections between external conductors and printed circuit boards. Featuring 5.08 mm pin spacing, WAGO's proven CAGE CLAMP® spring pressure connection technology and an integrated clamping collar, this terminal block offers a practical solution for industrial control equipment, automation electronics and panel-mounted PCB assemblies.
Part of the WAGO 231 Series, the 231-633/017-000 combines screwless conductor termination with through-hole solder connections. Its mounting flanges support PCB or front-panel installation, including arrangements where the terminal block is mounted flush with or protruding through an enclosure. The orange insulating housing provides easy visual identification, while the compact three-pole configuration supports organised wiring in industrial electronic equipment.
With a nominal conductor cross-section of 2.5 mm², an IEC rated current of 16 A and support for solid and fine-stranded conductors from 0.08–2.5 mm², the WAGO 231-633/017-000 is suitable for a wide range of industrial wire-to-board connections. Its spring pressure terminals, solderable contacts and mechanical mounting features make it a dependable choice for electrical engineers, PCB designers and OEM equipment manufacturers.
Industrial automation equipment depends on secure electrical connections between external wiring and electronic control circuits. PCB terminal blocks provide a practical interface for connecting conductors directly to printed circuit boards, helping simplify equipment assembly, wiring organisation and maintenance. WAGO's CAGE CLAMP® technology uses spring pressure to retain conductors without conventional terminal screws.
The WAGO 231-633/017-000 combines three conductor connection positions with through-hole solder contacts and mechanically supported mounting. Its feed-through design is particularly useful for control modules, panel-mounted electronics and industrial equipment where wiring must pass through an enclosure or connect to a PCB assembly. Correct installation requires the manufacturer's specified PCB footprint, suitable soldering procedures and compliance with the electrical ratings applicable to the complete circuit.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 3 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 | |
| Model | 231-633/017-000 | |
| Manufacturer part number | 231-633/017-000 | |
| Product type | Feed-through PCB terminal block | |
| Connector configuration | 3-pole, single level | |
| Number of connection points | 3 | |
| Number of potentials | 3 | |
| Number of connection types | 1 | |
| Connection technology | CAGE CLAMP® | |
| Actuation type | Operating tool | |
| Conductor entry direction relative to PCB | 0° | |
| Pin spacing | 5.08 mm | |
| Nominal conductor cross-section | 2.5 mm² | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage UL (Use Group B) | 300 V | |
| Rated current UL (Use Group B) | 15 A | |
| Rated voltage UL (Use Group C) | 150 V | |
| Rated current UL (Use Group C) | 15 A | |
| Rated voltage UL (Use Group D) | 300 V | |
| Rated current UL (Use Group D) | 10 A | |
| PCB contact technology | Through-hole technology (THT) | |
| Solder pin arrangement | In-line across the terminal strip | |
| Number of solder pins per potential | 1 | |
| Solder pin length | 4.7 mm | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| PCB drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Mounting type | Mounting flange, feed-through mounting and panel mounting | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Width | 30.44 mm | |
| Height | 19 mm | |
| Height from mounting surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Country of origin | Germany | |
| GTIN | 4044918282970 | |
| Product category | PCB Terminal Blocks |
The WAGO 231-633/017-000 is a 3-pole feed-through PCB terminal block used to connect external electrical conductors to printed circuit boards. It features CAGE CLAMP® spring pressure terminals, through-hole solder connections and mounting flanges for compatible PCB or panel installations.
The terminal block has 3 poles, providing three independent electrical connection positions with 5.08 mm pin spacing.
The terminal block accepts solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–14 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², and the specified stripping length is 8–9 mm.
The WAGO 231-633/017-000 has an IEC rated current of 16 A. Its IEC rated voltage is 630 V under overvoltage category II, pollution degree 2 conditions, and 320 V under overvoltage category III conditions. The applicable rating depends on the installation environment and circuit design.
The terminal block uses through-hole solder pins with a length of 4.7 mm. The specified PCB drilled hole diameter is 1.8 mm with a +0.1 mm tolerance. Its mounting flanges and clamping collar also support mechanically secured feed-through or panel-mounted arrangements.
WAGO PCB terminal blocks provide electrical engineers, industrial automation specialists and OEM equipment manufacturers with practical solutions for secure conductor termination and printed circuit board connectivity. The WAGO 231-633/017-000 combines three connection poles, 5.08 mm spacing, CAGE CLAMP® technology, through-hole solder contacts and mechanically supported mounting for reliable industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.