Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.986
The WAGO 231-632/023-000 is a high-quality 2-pole through-panel PCB terminal block with CAGE CLAMP® spring pressure connections, angled solder pins and integrated mounting flanges. Designed for reliable conductor-to-PCB electrical connections, it is part of the established WAGO 231 Series MCS MIDI Classic range. Its compact construction makes it suitable for industrial automation equipment, control electronics, power supplies and electrical enclosures requiring secure, accessible conductor termination.
Featuring WAGO's proven CAGE CLAMP® spring pressure connection technology, the terminal block provides dependable conductor termination without conventional screw terminals. It accommodates solid and fine-stranded conductors from 0.08–2.5 mm², with an operating tool used to open the spring clamps during wiring. The angled through-hole solder pins establish permanent electrical connections to the printed circuit board, while the integrated fixing flanges support mechanically secure PCB or front-panel installation. The terminal block can be positioned flush with the enclosure or protruding through a suitable panel opening.
With 2 independent electrical connection positions, 5.08 mm pin spacing and an IEC rated current of 16 A, the WAGO 231-632/023-000 provides a practical interface for industrial control and electrical interconnection circuits. Its rated voltage is 320 V under IEC overvoltage category III, pollution degree 3 conditions, increasing to 630 V under category II, pollution degree 2 conditions. The distinctive orange polyamide housing, tin-plated copper contacts and integrated mounting arrangement make it a dependable choice for equipment manufacturers and electrical engineers.
Through-panel PCB terminal blocks such as the WAGO 231-632/023-000 provide a practical interface between external wiring and printed circuit boards in industrial automation systems, control equipment and machinery. The two-pole arrangement allows two independent electrical conductors to be connected directly to the PCB through CAGE CLAMP® spring pressure terminals and permanently soldered contacts. Unlike a pluggable male connector, this component does not require a separate female mating connector because the conductor terminals and PCB solder contacts form one integrated assembly.
The integrated fixing flanges are particularly valuable for equipment requiring a mechanically supported electrical interface through an enclosure panel. They allow the terminal block to be mounted flush with the housing or arranged to protrude through a suitable panel opening. Combined with the angled THT solder pins, this construction helps support the terminal block mechanically rather than relying solely on the solder connections. Its 5.08 mm pitch, 16 A IEC current rating and orange PA66 housing make the WAGO 231-632/023-000 suitable for compact industrial PCB assemblies where dependable conductor termination and convenient installation are important. All wiring and servicing should be undertaken with the relevant electrical circuits safely isolated.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 2 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series / MCS MIDI Classic | |
| Model | 231-632/023-000 | |
| Product type | Through-panel PCB terminal block | |
| Connector configuration | PCB terminal strip with angled solder pins | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Number of clamping units | 2 | |
| Number of connection points | 2 | |
| Number of electrical potentials | 2 | |
| Number of connection types | 1 | |
| Number of connection levels | 1 | |
| Conductors per connection | 1 | |
| Pin spacing | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group C) | 150 V | |
| Rated current (UL 1059, Use Group C) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group C) | 150 V | |
| Rated current (CSA, Use Group C) | 15 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Conductor termination method | Screwless spring clamp | |
| Actuation type | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor connection direction relative to PCB | 0° | |
| PCB contact technology | Through-hole technology (THT) | |
| PCB termination method | Solder connection | |
| Solder pin configuration | Angled | |
| Solder pin arrangement | In-line across the terminal strip | |
| Solder pins per potential | 1 | |
| Total number of solder pins | 2 | |
| Solder pin length | 4.7 mm | |
| PCB drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Maximum specified PCB thickness | 1.5 mm | |
| Mounting type | Mounting flange | |
| Secondary mounting methods | Feed-through mounting / panel mounting | |
| Mounting arrangement | Integrated fixing flanges | |
| Through-panel applications | Suitable | |
| Mounting positions | Flush with enclosure or protruding | |
| Maximum enclosure sheet thickness | 1.5 mm | |
| Height | 19 mm | |
| Height above PCB surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Weight | Approx. 3.7 g | |
| Insulating material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Contact material | Electrolytic copper (E-Cu) | |
| Contact plating | Tin | |
| Fire load | 0.068 MJ | |
| Temperature limit range | -60 to +105 °C | |
| Processing temperature | -35 to +60 °C | |
| Connector arrangement | Single-row, 2-position | |
| Connection format | Direct conductor-to-PCB connection | |
| Electrical insulation standard | IEC/EN 60664-1 | |
| General approvals | UL 1059 and CSA C22.2 | |
| Marine approval | Bureau Veritas (BV) | |
| RoHS compliance | Compliant, no exemption | |
| Packaging type | Box | |
| Standard packaging quantity | 100 pieces | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918282901 | |
| Product group | WAGO Multi Connection System | |
| Application | Industrial PCB connections, control electronics, feed-through wiring and equipment enclosure installations |
The WAGO 231-632/023-000 is a 2-pole through-panel PCB terminal block designed to connect electrical conductors directly to printed circuit boards. It features CAGE CLAMP® spring pressure terminals, angled solder pins and integrated mounting flanges, making it suitable for industrial control electronics, automation equipment and panel-mounted electrical connections.
The terminal block uses through-hole technology (THT) with two angled solder pins that are inserted into appropriately positioned PCB holes and soldered to establish permanent electrical connections. The solder pins have a length of 4.7 mm, and the specified drilled hole diameter is 1.8 mm with a positive tolerance of 0.1 mm. Integrated fixing flanges provide additional support for PCB and through-panel installations.
The terminal block accommodates solid and fine-stranded conductors from 0.08–2.5 mm², corresponding to 28–14 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while those with uninsulated ferrules are supported from 0.25–2.5 mm². The specified conductor stripping length is 8–9 mm.
The WAGO 231-632/023-000 has an IEC rated current of 16 A and a rated voltage of 320 V under overvoltage category III, pollution degree 3 conditions. Under overvoltage category II, pollution degree 2 conditions, the rated voltage is 630 V. Its rated impulse withstand voltage is 4 kV. The applicable operating limits depend on the PCB design and complete electrical installation.
The integrated mounting flanges provide additional mechanical support when the terminal block is installed on a PCB or through an equipment panel. The design supports flush or protruding panel mounting arrangements and is suitable for enclosure sheet thicknesses up to 1.5 mm. This arrangement helps reduce mechanical stress on the PCB solder connections while providing convenient access to the CAGE CLAMP® conductor terminals.
WAGO PCB terminal blocks provide established conductor connection solutions for industrial automation, electronic control systems and equipment manufacturing. The WAGO 231-632/023-000 combines a compact 2-pole configuration, CAGE CLAMP® spring pressure technology, 5.08 mm pin spacing, angled through-hole solder pins and integrated fixing flanges to support dependable electrical connectivity, accessible conductor termination and mechanically secure PCB installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.