Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.986
The WAGO 231-632/017-000 is a 2-pole feed-through PCB terminal block featuring CAGE CLAMP® spring pressure connection technology, a 5.08 mm pin spacing and an integrated mounting flange with clamping collar. Part of the WAGO 231 Series, this orange terminal block provides a dependable solution for connecting electrical conductors to printed circuit boards in industrial control equipment, automation systems and electronic assemblies.
Designed for through-hole PCB mounting and panel feed-through applications, the WAGO 231-632/017-000 combines screwless conductor termination with solder-pin connections. Its CAGE CLAMP® terminals accommodate solid and fine-stranded conductors from 0.08–2.5 mm², while the integrated mounting flange supports secure mechanical installation in compatible panels and equipment housings.
With a rated current of 16 A, a nominal conductor cross-section of 2.5 mm² and a durable orange polyamide housing, this terminal block is suitable for industrial equipment requiring compact, reliable wire-to-board electrical connections. Its tin-plated copper contacts, spring pressure terminals and solderable through-hole pins make it a practical choice for PCB manufacturers, electrical engineers and industrial equipment designers.
PCB terminal blocks provide an essential interface between external wiring and electronic control circuits. In industrial automation equipment, they allow field conductors to be connected directly to printed circuit boards without requiring separate screw-terminal assemblies. WAGO CAGE CLAMP® technology provides spring pressure conductor retention, helping simplify wiring and maintenance while supporting reliable electrical connections.
The WAGO 231-632/017-000 combines a two-pole feed-through connection arrangement with through-hole solder pins and an integrated mounting flange. This construction is particularly suitable for equipment where the PCB connection must be mechanically supported within a panel or enclosure. The terminal block should be installed using the manufacturer's specified PCB footprint, soldering requirements and mounting dimensions, with conductor sizes and circuit ratings selected for the complete application.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 2 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series | |
| Model | 231-632/017-000 | |
| Manufacturer part number | 231-632/017-000 | |
| Product type | Feed-through PCB terminal block | |
| Connector configuration | 2-pole, single level | |
| Number of connection points | 2 | |
| Number of potentials | 2 | |
| Number of connection types | 1 | |
| Connection technology | CAGE CLAMP® | |
| Conductor termination | Spring pressure connection | |
| Actuation method | Operating tool | |
| Conductor entry direction relative to PCB | 0° | |
| Pin spacing | 5.08 mm | |
| Nominal conductor cross-section | 2.5 mm² | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Rated current | 16 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated impulse voltage | 4 kV | |
| PCB contact technology | Through-hole technology (THT) | |
| Solder pin arrangement | In-line across the terminal strip | |
| Number of solder pins per potential | 1 | |
| Solder pin length | 4.7 mm | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| PCB drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Maximum PCB thickness | 1.5 mm | |
| Mounting type | Mounting flange / feed-through panel mounting | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Width | 25.36 mm | |
| Height | 19 mm | |
| Height from mounting surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Weight | 3.8 g | |
| Operating temperature limits | -60 to +105 °C | |
| Country of origin | Germany | |
| GTIN | 4044918282888 | |
| Product category | PCB Terminal Blocks |
The WAGO 231-632/017-000 is a 2-pole feed-through PCB terminal block used to connect electrical conductors to printed circuit boards. Its CAGE CLAMP® terminals provide screwless conductor termination, while its through-hole solder pins and mounting flange support PCB and panel integration.
The terminal block has 2 poles, providing two independent electrical connection points with 5.08 mm pin spacing.
The terminal block accepts solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–14 AWG. Its conductor stripping length is 8–9 mm. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm².
The WAGO 231-632/017-000 has a rated current of 16 A. Its IEC rated voltage is 630 V under overvoltage category II, pollution degree 2 conditions, and 320 V under overvoltage category III conditions. The applicable rating depends on the installation environment and circuit design.
The terminal block uses through-hole solder pins with a pin length of 4.7 mm. The specified PCB drilled hole diameter is 1.8 mm with a +0.1 mm tolerance. It also features a mounting flange with clamping collar for compatible feed-through panel installations.
WAGO PCB terminal blocks provide electronic equipment designers, industrial automation engineers and OEM manufacturers with practical solutions for reliable conductor termination and printed circuit board connectivity. The WAGO 231-632/017-000 combines two connection poles, 5.08 mm spacing, CAGE CLAMP® technology, through-hole solder pins and a mounting flange with clamping collar for professional industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.