Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£9.84
The WAGO 231-621/019-000/035-000 is a 21-pole male pluggable connector from the WAGO MCS MIDI Classic 231 series. Combining CAGE CLAMP® spring pressure conductor termination, a 5 mm contact pitch, a clamping collar and a strain relief plate, it is designed for organised multi-circuit wiring in industrial electrical equipment.
The connector provides 21 individual conductor connection positions within one detachable interface. Its spring pressure connection system allows conductors to be terminated without conventional terminal screws, supporting efficient cable preparation, electrical assembly and maintenance.
The combined /019-000/035-000 configuration brings together the mechanical mounting arrangement associated with the clamping collar and the additional cable-support functionality of a strain relief plate. This makes it particularly suitable for equipment designs requiring both a defined connector mounting position and improved cable harness management.
The underlying WAGO 231-621 connector platform uses a 5 mm pin spacing, supports conductors up to 2.5 mm² and has a nominal 12 A IEC current rating. Electrical ratings and installation dimensions for the complete configured assembly should be checked against the exact manufacturer documentation.
Important specification note: The exact combined part number 231-621/019-000/035-000 is identified in distributor records as a WAGO 1-conductor male connector. WAGO documents the same combined suffix arrangement on other pole counts in the MCS MIDI Classic series as a connector with a clamping collar and strain relief plate. The electrical ratings and conductor ranges above are based on the standard 231-621 platform; the complete 21-pole combined variant's dimensional drawing and approval data have not been independently confirmed.
The clamping collar provides a mechanical feature for securing the connector within a suitable equipment mounting arrangement. This is useful where the connector must be positioned consistently and supported during installation, maintenance or cable handling.
The /019-000 configuration is associated with the WAGO 231-series clamping collar and mounting flange arrangement. For panel-mounted applications, the equipment designer should check the relevant fixing geometry, mounting clearances and panel opening dimensions.
The clamping collar supports the connector body but should not be assumed to replace a dedicated cable strain relief arrangement.
The strain relief plate provides an additional mechanical support point for the connected cable assembly. When used with a suitable cable securing method, it can help reduce the transfer of cable movement and pulling forces to the electrical conductor terminations.
This is particularly valuable in industrial control cabinets, modular machinery and OEM cable harnesses where connectors may be handled during equipment installation or servicing.
The /035-000 strain relief arrangement is associated with WAGO MCS MIDI connectors in the 10–24-pole range. The appropriate cable ties, securing method and permissible mechanical loads must be determined from the relevant WAGO instructions.
A strain relief plate does not automatically provide an ingress protection rating or a guaranteed cable pull-out force. The complete cable assembly must be designed for its intended mechanical environment.
The WAGO 231-621 connector platform uses CAGE CLAMP® spring pressure termination, which secures conductors through a mechanical spring rather than conventional terminal screws.
This design supports reliable electrical contact while eliminating terminal screw tightening torque requirements. Conductors can be prepared and terminated using an appropriate operating tool, making the system suitable for cable harness production and industrial electrical assembly.
The standard connector accepts solid and fine-stranded conductors from 0.08–2.5 mm². The appropriate conductor preparation and ferrule selection must follow WAGO's published connection data.
The standard stripping length is 8–9 mm. Correct stripping, insertion and clamp operation are essential for dependable electrical performance.
With 21 connection positions, the WAGO 231-621/019-000/035-000 is suitable for combining multiple electrical circuits into one serviceable connector interface.
Its 5 mm contact pitch supports consistent terminal spacing and helps simplify cable identification, routing and equipment assembly.
The MCS MIDI Classic system supports compatible wire-to-wire and board-to-wire connections. The selected mating component must match the connector's pole count, contact spacing, coding arrangement, mechanical geometry and electrical ratings.
The combined clamping collar and strain relief plate arrangement is particularly useful where the electrical connection must be mechanically supported and the associated cable harness requires additional retention.
The WAGO MCS MIDI Classic system includes connectors without load-breaking capacity under IEC 61984. The 231-621/019-000/035-000 must not be connected or disconnected while live or under load.
Electrical circuits must be safely isolated before mating or unmating. The equipment design must also prevent accessible male contacts from remaining energised when the connector is disconnected.
Installers should verify the correct mating connector, conductor size, wire stripping length, mounting arrangement and cable securing method before commissioning the assembly.
| Manufacturer | WAGO |
|---|---|
| Manufacturer part number | 231-621/019-000/035-000 |
| Product family | MCS MIDI Classic |
| Series | 231 |
| Product type | 1-conductor male pluggable connector |
| Connector gender | Male |
| Number of poles | 21 |
| Connection positions | 21 |
| Contact pitch | 5 mm |
| Connection technology | CAGE CLAMP® |
| Housing colour | Grey |
| Maximum nominal conductor cross-section | 2.5 mm² |
| Standard connector conductor range | 0.08–2.5 mm² |
| Standard connector conductor range (AWG) | 28–12 AWG |
| Standard connector stripping length | 8–9 mm |
| Standard connector IEC rated current | 12 A |
| Standard connector IEC rated voltage (III/3) | 320 V |
| Standard connector IEC rated voltage (II/2) | 630 V |
| Standard connector rated impulse voltage | 4 kV |
| Standard connector contact material | Electrolytic copper |
| Standard connector contact plating | Tin |
| Standard connector housing material | Polyamide (PA66) |
| Standard connector housing flammability classification | UL94 V-0 |
| Overall dimensions | Refer to exact variant-specific WAGO dimensional drawing |
| Strain relief plate fixing details | Refer to WAGO installation documentation |
| Applicable connector system standard | IEC 61984 |
The WAGO 231-621/019-000/035-000 is a 21-pole male pluggable connector from the MCS MIDI Classic 231 series, with a clamping collar and strain relief plate configuration for industrial electrical assemblies.
It has 21 poles, providing 21 individual conductor connection positions with a 5 mm contact pitch.
The /019-000 suffix is associated with the clamping collar and mounting flange arrangement. The /035-000 suffix identifies a strain relief plate configuration in the WAGO MCS MIDI Classic connector range.
The combined suffix arrangement corresponds to a clamping collar and strain relief plate configuration within the WAGO MCS MIDI Classic family. The exact 21-pole assembly details should be checked against the manufacturer's variant-specific documentation.
The underlying WAGO 231-621 connector platform has an IEC rated current of 12 A. The applicable rating for the complete configured assembly must be verified against the relevant WAGO approval and installation data.
The standard WAGO 231-621 platform is rated at 320 V under IEC overvoltage category III, pollution degree 3 conditions and 630 V under category II, pollution degree 2 conditions. The complete assembly must be assessed against the relevant installation requirements.
The standard WAGO 231-621 connector supports solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–12 AWG.
CAGE CLAMP® is WAGO's spring pressure conductor termination system. It secures conductors using a mechanical spring rather than conventional terminal screws.
The standard WAGO 231-621 connector specifies a stripping length of 8–9 mm. Follow the manufacturer's conductor preparation and installation instructions.
The complete dimensions of the 231-621/019-000/035-000 assembly should be obtained from its variant-specific WAGO dimensional drawing. Dimensions for the standard connector or the clamping-collar-only version should not be assumed to apply to the combined assembly.
The 231-621/019-000 is the clamping collar version. The 231-621/019-000/035-000 identifies a combined configuration that also includes the strain relief plate feature.
The strain relief plate provides a mechanical support point for a suitable cable securing arrangement. It helps reduce cable movement and pulling forces transferred to conductor terminations.
The connector is intended for compatible 21-pole WAGO MCS MIDI Classic mating components with a 5 mm pitch. The complete mating geometry, mechanical coding and electrical ratings must be checked before installation.
No. WAGO MCS MIDI Classic connectors are not designed for load-breaking operation. They must not be connected or disconnected while live or under load. Circuits must be safely isolated before mating or unmating.
The WAGO 231-621/019-000/035-000 combines 21 CAGE CLAMP® connection positions, a 5 mm contact pitch, a clamping collar and a strain relief plate arrangement to support organised electrical connections and cable management in industrial automation, machinery and control equipment.
Exact part identification: WAGO 231-621/019-000/035-000 Product Listing.
Manufacturer connector reference: WAGO 231-621 Base Connector Information.
Manufacturer configuration reference: WAGO MCS MIDI Classic Clamping Collar and Strain Relief Plate Configuration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.