Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.56
The WAGO 231-620/019-000 is a 20-pole male pluggable connector with a clamping collar and mounting flange, designed for reliable multi-circuit electrical connections in industrial automation, machinery and control systems. Part of the WAGO MCS MIDI Classic 231 Series, it combines CAGE CLAMP® spring pressure connection technology, a 5 mm contact pitch and a mechanically supported mounting configuration.
The distinguishing feature of the /019-000 variant is its clamping collar and fixing flange, allowing the connector to be secured in suitable panel or through-panel mounting arrangements. Unlike the standard free-hanging WAGO 231-620, this configuration is particularly useful where a detachable connector must remain mechanically supported within an electrical enclosure or equipment assembly.
With 20 independent connection positions, a rated current of 12 A under IEC specifications and a conductor connection range of 0.08–2.5 mm², the WAGO 231-620/019-000 provides a practical solution for high-density control wiring. Its screwless spring terminals and pluggable interface help simplify equipment assembly, maintenance and modular electrical installation.
The WAGO 231-620/019-000 combines CAGE CLAMP® spring pressure conductor termination with a clamping collar and mounting flange. The spring clamp provides consistent electrical contact pressure without conventional conductor clamping screws, while the flange enables the connector to be mechanically supported in a suitable mounting assembly.
Its 20-pole configuration allows twenty independent circuits to be grouped within a single detachable electrical interface. This is especially useful for industrial control panels, modular machinery and pre-assembled cable harnesses where numerous conductors must remain organised. The mounting flange helps position the connector securely, reducing reliance on the attached conductors for mechanical support.
The connector should be installed using the correct fixing dimensions and compatible mating components. The clamping collar and mounting flange do not automatically provide cable strain relief, so additional cable support may be required where external pulling forces are expected. In accordance with IEC/EN 61984, connectors without breaking capacity must not be connected or disconnected while live or under load, and accessible male contacts must not remain energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 20 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-620/019-000 | |
| Manufacturer article reference | 51110912 | |
| Product series | MCS MIDI Classic 231 Series | |
| Product type | Male pluggable connector with clamping collar | |
| Connector gender | Male | |
| Number of connection positions | 20 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Mounting arrangement | Panel or through-panel mounting | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | Up to 600 V under the applicable approval classification | |
| Connection technology | CAGE CLAMP® | |
| Conductor termination | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Compatible conductor types | Solid and fine-stranded copper conductors | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry direction relative to mating direction | 0° | |
| Plug wire entry | 180° inline | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability classification | UL 94 V-0 | |
| Temperature limits | −60 to +100 °C | |
| Nominal contact-section length | 103.2 mm | |
| Overall length including flange projections | 120.6 mm, calculated from the manufacturer dimensional formula | |
| Nominal connector height | 14.3 mm | |
| Nominal connector depth | 27.5 mm | |
| Packaging unit | 10 pieces | |
| Connector standard | IEC/EN 61984 | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918259187 | |
| Manufacturer product reference | https://www.wago.com/231-620/019-000 |
The WAGO 231-620/019-000 is a 20-pole male pluggable connector with a clamping collar and mounting flange, used for detachable electrical connections in industrial automation, control panels and machinery.
Yes. The 231-620/019-000 incorporates a clamping collar and mounting flange for mechanically secured installation in compatible panel or through-panel mounting arrangements.
The connector has a rated current of 12 A under IEC specifications and 15 A under the applicable UL classification. The permissible operating current depends on the conductor, mating connector and installation conditions.
The connector accepts copper conductors from 0.08 to 2.5 mm² (28–12 AWG). The specified stripping length is 8–9 mm, and a suitable operating tool is used to actuate the CAGE CLAMP® terminals.
The standard WAGO 231-620 is a 20-pole male pluggable connector intended for free-hanging inline applications, while the 231-620/019-000 adds a clamping collar and mounting flange for mechanically supported panel installation. Both belong to the WAGO MCS MIDI Classic 231 Series and use CAGE CLAMP® connection technology.
WAGO MCS MIDI Classic connectors provide established spring pressure connection technology for industrial machinery, control systems and electrical equipment. The WAGO 231-620/019-000 combines twenty independent conductor connections, a 5 mm contact pitch and an integrated mounting flange to support organised, mechanically secured and maintainable industrial wiring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.