Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.89
The WAGO 231-616/018-000 is a 16-pole male pluggable connector with snap-in mounting feet, designed for reliable electrical connections in industrial automation, machinery and control systems. Part of the WAGO MCS MIDI Classic 231 Series, it combines proven CAGE CLAMP® spring pressure connection technology with a 5 mm contact pitch and a mechanically supported mounting arrangement.
Unlike the standard free-hanging WAGO 231-616 connector, the 231-616/018-000 incorporates snap-in mounting feet for installation in compatible panel mounting arrangements. It can also be used with an appropriate mounting adapter for DIN-35 rail installation, providing flexibility for control cabinet and industrial equipment designs.
With 16 independent connection positions, a rated current of 12 A (IEC) and a conductor connection range of 0.08–2.5 mm², the WAGO 231-616/018-000 is suitable for organised multi-circuit wiring. Its screwless conductor terminals, grey insulating housing and detachable connector interface make it a practical solution for industrial panel builders, machinery manufacturers and electrical maintenance engineers.
The WAGO 231-616/018-000 combines two important installation features: CAGE CLAMP® spring pressure conductor termination and snap-in mounting feet. The spring clamp maintains electrical contact pressure without requiring conventional terminal screws, while the mounting feet help secure the connector in a suitable panel or mounting assembly.
Its 16-pole configuration allows sixteen independent electrical circuits to be grouped within one detachable connection interface. This is particularly useful in industrial control cabinets, modular machinery and cable harness assemblies where multiple conductors must remain organised and accessible. The mounting feet provide mechanical support that is not available on the standard free-hanging connector variant.
For DIN-35 rail installations, a compatible mounting adapter, such as the WAGO 209-137 where specified for the application, must be selected separately. The mounting feet do not automatically provide cable strain relief, so additional cable support may be required where external pulling forces are expected. The connector must be used with a compatible mating component and must not be connected or disconnected while energised or under load unless the complete connector system is specifically rated for that operation.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 16 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-616/018-000 | |
| Manufacturer article reference | 51110873 | |
| Product series | MCS MIDI Classic 231 Series | |
| Product type | Male pluggable connector with snap-in mounting feet | |
| Connector gender | Male | |
| Number of connection points | 16 | |
| Number of electrical potentials | 16 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Mounting arrangement | Panel mounting; DIN-35 rail mounting with suitable adapter | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, category III/3) | 320 V | |
| Rated voltage (IEC, category II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | Up to 600 V under the applicable approval classification | |
| Connection technology | CAGE CLAMP® | |
| Conductor termination | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Compatible conductor types | Solid and fine-stranded copper conductors | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry direction relative to mating direction | 0° | |
| Plug wire entry | 180° inline | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability classification | UL 94 V-0 | |
| Temperature limits | −60 to +100 °C | |
| Width | 83.2 mm | |
| Height | 14.3 mm | |
| Depth | 27.5 mm | |
| Approximate weight | 25.06 g | |
| Packaging unit | 25 pieces | |
| Connector standard | IEC/EN 61984 | |
| GTIN / EAN | 4044918258791 | |
| Manufacturer product reference | https://www.wago.com/231-616/018-000 |
The WAGO 231-616/018-000 is a 16-pole male pluggable connector with snap-in mounting feet, used for detachable electrical connections in industrial automation, control equipment and modular wiring systems.
Yes. The 231-616/018-000 incorporates snap-in mounting feet for mechanically supported panel installation. DIN-35 rail mounting is also possible when the appropriate mounting adapter is used.
The connector has a rated current of 12 A under IEC specifications and 15 A under the applicable UL classification. The permissible operating current depends on conductor size, mating connector, ambient conditions and installation requirements.
The connector accepts copper conductors from 0.08 to 2.5 mm² (28–12 AWG). The specified conductor stripping length is 8–9 mm, and a suitable operating tool is used to actuate the CAGE CLAMP® terminals.
The standard WAGO 231-616 is a 16-pole male pluggable connector intended for free-hanging applications, while the 231-616/018-000 adds snap-in mounting feet for suitable panel mounting arrangements. Both belong to the WAGO MCS MIDI Classic 231 Series and use CAGE CLAMP® connection technology.
WAGO MCS MIDI Classic connectors provide established spring pressure connection technology for industrial machinery, control systems and electrical equipment. The WAGO 231-616/018-000 combines sixteen independent conductor connections, a 5 mm contact pitch and snap-in mounting feet to support organised, mechanically supported and maintainable industrial wiring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.