Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.53
The WAGO 231-615 is a high-quality 15-pole male pluggable connector from the WAGO MCS MIDI Classic 231 series. Designed for industrial automation, electrical control panels and modular equipment, it combines CAGE CLAMP® spring pressure connection technology with a 5 mm contact pitch to provide secure, organised electrical connections.
Featuring fifteen independent electrical connection positions, the WAGO 231-615 enables multiple circuits to be connected through a single detachable interface. Its screwless spring clamp terminals accommodate solid and fine-stranded conductors from 0.08–2.5 mm², making it suitable for a wide range of industrial wiring requirements.
With an IEC rated current of 12 A, voltage ratings of 320 V or 630 V depending on the applicable installation conditions, and a durable grey insulating housing, the WAGO 231-615 provides a dependable connection solution for industrial electrical equipment.
The standard 231-615 features a free-hanging, in-line mounting arrangement, making it particularly suitable for pre-assembled cable harnesses and modular wiring systems. Alternative versions with mounting flanges or snap-in mounting feet are available separately within the WAGO 231 series.
Technical note: The applicable electrical ratings depend on the certification, overvoltage category, pollution degree, conductor size and mating arrangement. The stated material temperature limit range should not be interpreted as a guarantee of full rated-current operation throughout that entire range.
The WAGO 231-615 provides a convenient solution for connecting multiple electrical circuits through a single detachable interface. Its fifteen-pole configuration is particularly useful in industrial machinery, control cabinets and modular equipment where organised wiring and accessible electrical connections are important.
The connector's 5 mm contact pitch provides consistent spacing between connection positions, while its compact single-row design allows multiple conductors to be grouped within one connector assembly.
As part of the WAGO MCS MIDI Classic system, the 231-615 supports wire-to-wire and board-to-wire connection arrangements when paired with compatible female connectors or PCB connection components.
The standard 231-615 is intended for free-hanging, in-line installation. Where mechanical mounting is required, WAGO offers separate configurations with snap-in mounting feet or mounting flanges. These variants must be selected using their full manufacturer part numbers.
The WAGO 231-615 incorporates CAGE CLAMP® spring pressure technology to secure electrical conductors without conventional terminal screws. The spring mechanism applies consistent contact pressure, helping maintain reliable electrical performance under normal industrial vibration and temperature variation.
The connector accommodates solid and fine-stranded conductors from 0.08–2.5 mm². Fine-stranded conductors fitted with suitable ferrules can also be used within the specified cross-section ranges.
Spring clamp operation is possible both parallel and perpendicular to the conductor entry direction. This provides flexibility during cable assembly, particularly where access to the connector is restricted by nearby components or enclosure features.
The specified 8–9 mm conductor stripping length supports correct insertion when used with an appropriate WAGO operating tool.
The WAGO 231-615 is a pluggable connector without load-breaking capability. It must not be connected or disconnected while live or under load. Electrical circuits must be safely isolated before mating or unmating, and the installation must prevent accessible male contacts from remaining energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 15 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-615 | |
| Series | MCS MIDI Classic 231 | |
| Product type | 1-conductor male pluggable connector | |
| Connector gender | Male | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Number of potentials | 15 | |
| Number of connection points | 15 | |
| Connections per pole | 1 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Contact arrangement | Single row | |
| Contact pitch | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, category III, pollution degree 3) | 320 V | |
| Rated voltage (IEC, category III, pollution degree 2) | 320 V | |
| Rated voltage (IEC, category II, pollution degree 2) | 630 V | |
| Rated surge voltage (IEC) | 4 kV | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Wire stripping length | 8–9 mm | |
| Connection actuation | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Conductor entry direction | 0° relative to mating direction | |
| Mounting type | Free-hanging, in-line | |
| Connector interface | Male plug contacts | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL94 V-0 | |
| Material temperature limit range | −60 to +100 °C | |
| Width | 78.2 mm | |
| Height | 14.3 mm | |
| Depth | 27.5 mm | |
| Dimensions (W × H × D) | 78.2 × 14.3 × 27.5 mm | |
| Packaging unit | 25 pieces | |
| Connector system | WAGO Multi Connection System (MCS) | |
| Applicable connector standard | IEC 61984 |
The WAGO 231-615 is a 15-pole male pluggable connector used in industrial automation, electrical control panels and modular wiring systems. It provides fifteen electrical connection positions using CAGE CLAMP® spring pressure technology.
The connector has 15 poles, providing fifteen independent electrical potentials with one conductor connection per pole. Its contacts are arranged in a single row with a 5 mm pitch.
The WAGO 231-615 has an IEC rated current of 12 A and a UL 1977 rated current of 15 A. The applicable current depends on the relevant approval standard, conductor size, mating component and installation conditions.
The connector is rated at 320 V under IEC overvoltage category III conditions and 630 V under IEC overvoltage category II, pollution degree 2 conditions. Its UL 1977 rated voltage is 600 V.
The WAGO 231-615 accepts solid and fine-stranded conductors from 0.08–2.5 mm², corresponding to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm².
The standard WAGO 231-615 has a free-hanging, in-line mounting configuration. Separate versions with snap-in mounting feet or mounting flanges are available for installations requiring dedicated mechanical mounting features.
CAGE CLAMP® is WAGO's spring pressure conductor termination system. It secures electrical conductors without conventional terminal screws, maintaining consistent contact pressure and supporting reliable electrical connections in industrial environments.
The WAGO 231-615 specifies a conductor stripping length of 8–9 mm. Conductors should be prepared according to WAGO's installation instructions and inserted using an appropriate operating tool.
The WAGO 231-615 measures 78.2 mm wide, 14.3 mm high and 27.5 mm deep.
Both connectors belong to the WAGO MCS MIDI Classic 231 series and feature fifteen poles, a 5 mm pitch and CAGE CLAMP® conductor termination. The standard 231-615 is a free-hanging connector, while the 231-615/018-000 includes integrated snap-in mounting feet for suitable DIN-35 rail and panel mounting.
The standard 231-615 is a free-hanging male connector, while the 231-615/019-000 features a clamping collar for mechanically supported mounting arrangements. Both have fifteen poles and a 5 mm contact pitch.
The WAGO 231-615 is designed for use with compatible 15-pole WAGO MCS MIDI Classic female mating connectors featuring a 5 mm contact pitch. Mechanical coding, mating geometry and electrical ratings must also be compatible.
No. WAGO MCS MIDI Classic connectors are not intended for load-breaking operation. The connector must not be connected or disconnected while live or under load. Electrical circuits must be safely isolated before mating or unmating.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical connections for industrial automation, machine building and control equipment. The WAGO 231-615 combines CAGE CLAMP® spring pressure technology, a fifteen-pole connection arrangement and a compact in-line design to support organised wiring, efficient installation and serviceable industrial electrical systems.
Manufacturer reference: WAGO 231-615 Product Information.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.