231-614 Wago Male Connector, 14-Pole Pin Spacing 5 mm / 0.197 In Gray

231-614 Wago Male Connector, 14-Pole Pin Spacing 5 mm / 0.197 In Gray

SKU: 231-614MPN: 231-614
Price
List Price £7.31 ex VAT
Your Price (ex VAT) Save 15%
£6.21 15% OFF
You save £1.10 per unit
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £6.21
Trade pricing is personalised to your account

Manufacturer Lead Time

Sold in packs of 25

£6.21

Why Choose the WAGO 231-614 14-Pole Male Pluggable Connector?

The WAGO 231-614 is a high-quality 14-pole male pluggable connector from the WAGO MCS MIDI Classic 231 Series, designed for dependable electrical connections in industrial automation, control cabinets and modular equipment. Featuring WAGO's proven CAGE CLAMP® spring pressure connection technology, this connector provides secure, screwless conductor termination and a convenient detachable interface for compatible mating components.

With a 5 mm contact pitch, fourteen independent connection positions and a nominal conductor capacity of 2.5 mm², the WAGO 231-614 supports solid and fine-stranded copper conductors from 0.08–2.5 mm². Its operating-tool-actuated spring clamps allow efficient conductor installation, while vertical and horizontal actuation access simplifies cable pre-assembly and on-equipment wiring.

Rated at 12 A under IEC requirements, with a 320 V rating under category III/3 and a 630 V rating under category II/2, the WAGO 231-614 offers a practical solution for control signals, auxiliary power circuits and industrial electrical interfaces. Its grey polyamide housing, tin-plated copper contacts and compact in-line design make it suitable for professional OEM and industrial installations.

Key Advantages

  • 14-pole male connector: Provides fourteen independent electrical connection positions in one compact assembly.
  • CAGE CLAMP® technology: Delivers reliable screwless conductor termination using spring pressure.
  • 5 mm contact pitch: Supports organised multi-circuit wiring with consistent connection spacing.
  • 12 A IEC rated current: Suitable for appropriately rated industrial control and auxiliary power circuits.
  • 2.5 mm² nominal conductor capacity: Accommodates commonly used industrial conductor sizes.
  • Wide conductor compatibility: Supports solid and fine-stranded copper conductors from 0.08–2.5 mm².
  • Pluggable mating interface: Enables convenient modular assembly and servicing when equipment is safely isolated.
  • Vertical and horizontal actuation: Provides flexible access for conductor installation and removal.
  • Free-hanging in-line design: Suitable for cable-mounted connections without an integrated mounting flange.
  • Coding fingers: Support connector identification and appropriate mating configurations.
  • Industrial-grade construction: Combines tin-plated copper contacts with a durable insulating housing.
  • Modular connector system: Supports compatible wire-to-wire and board-to-wire connection arrangements.

Key Features

  • WAGO MCS MIDI Classic 231 Series connector system.
  • 14-pole male pluggable connector.
  • One conductor connection per pole.
  • 5 mm contact pitch.
  • CAGE CLAMP® spring pressure conductor termination.
  • 12 A IEC rated current.
  • 320 V IEC rated voltage under category III/3.
  • 630 V IEC rated voltage under category II/2.
  • 15 A UL rated current.
  • 600 V UL rated voltage.
  • 2.5 mm² nominal conductor cross-section.
  • 0.08–2.5 mm² solid and fine-stranded conductor compatibility.
  • 28–12 AWG conductor range.
  • 8–9 mm conductor strip length.
  • Operating-tool actuation.
  • Vertical and horizontal CAGE CLAMP® actuation access.
  • 180° in-line conductor entry.
  • Male pin contact interface for compatible mating connectors.
  • Free-hanging cable mounting arrangement.
  • Coding fingers for connector configuration.
  • Tin-plated electrolytic copper contacts.
  • Grey polyamide PA66 insulating housing.
  • UL 94 V-0 flammability classification.

Reliable CAGE CLAMP® Connections for Industrial Wiring

The WAGO 231-614 provides a dependable electrical interface for industrial equipment requiring secure conductor termination and detachable multi-pole connections. Its CAGE CLAMP® spring pressure system maintains contact force on connected conductors without conventional terminal screws, supporting reliable electrical performance in appropriately designed installations.

The fourteen-pole configuration enables multiple control signals, auxiliary power connections and equipment interface circuits to be organised through a single connector. Its 5 mm contact pitch offers consistent spacing, while the free-hanging in-line design supports cable assemblies that do not require an integral mounting flange or snap-in mounting feet.

The connector is suitable for wire-to-wire and board-to-wire applications when used with compatible WAGO mating components. Vertical and horizontal CAGE CLAMP® actuation allows conductors to be terminated during cable pre-assembly or directly at equipment, helping streamline manufacturing and maintenance workflows.

The WAGO MCS MIDI Classic system supports modular servicing, but its connectors have no load-breaking capability. They must not be connected or disconnected while live or under load. Equipment must be safely isolated before separation, and circuit designs must prevent accessible male contacts from remaining energised when unmated.

Typical Applications

  • Industrial automation and control cabinet wiring.
  • Modular wire-to-wire electrical connections.
  • Board-to-wire connections using compatible WAGO headers.
  • PLC interface modules and electronic control systems.
  • Industrial power supply and auxiliary control circuits.
  • Machine control panels and OEM machinery.
  • Sensor and actuator interface wiring.
  • Building automation and HVAC control equipment.
  • Detachable cable assemblies for industrial electronic equipment.
  • Industrial systems requiring fourteen-pole male pluggable connections.

Technical Specifications

Tick the specs you need, then view products that match.

Current 12 A
Voltage 320 V
Product Series WAGO 231
Rated surge voltage 4 kV
Number of plug-in contact rows 1
Connectable cable type Tubular cable
Flammability class of insulation material according to UL 94 V0
Operating temperature -60 – 100 °C
Rated current In 12 A
Connectable conductor cross section fine-strand without cable end sleeve 0.08 – 2.5 mm²
Degree of protection (IP), mounted IP10
Material insulation body Thermoplastic
Coating housing Uncoated
Connectable conductor cross section multi-wired 0.08 – 2.5 mm²
Housing colour Grey
Modular spacing contacts 5 mm
Angle contact/conductor connection 180° (horizontal)
Contact type Pin
Material contact Other copper alloys
Type of electric connection Spring clamp connection
Housing material Plastic
Type of connection Printed circuit board to cable
Connectable conductor cross section fine-strand with cable end sleeve 0.25 – 1.5 mm²
Modular spacing connections 5 mm
Number of poles 14
Material of contact surface Tin
Rated voltage 320 V
Pollution degree 2
Connectable conductor cross section solid-core 0.08 – 2.5 mm²
Overvoltage category III
Manufacturer WAGO
Manufacturer part number 231-614
Series MCS MIDI Classic 231 Series
Product type Male pluggable connector
Product description 1-conductor male connector
Connector gender Male
Number of connection positions 14
Number of potentials 14
Number of levels 1
Number of rows 1
Contact pitch 5 mm
Connection technology CAGE CLAMP® spring pressure connection
Rated current (IEC) 12 A
Rated voltage (IEC, III/3) 320 V
Rated voltage (IEC, II/2) 630 V
Rated current (UL) 15 A
Rated voltage (UL) 600 V
Nominal conductor cross-section 2.5 mm²
Solid conductor cross-section 0.08–2.5 mm²
Fine-stranded conductor cross-section 0.08–2.5 mm²
Conductor size 28–12 AWG
Conductor strip length 8–9 mm
Conductor termination Screwless spring clamp
Actuation type Operating tool
Actuation access Vertical and horizontal
Conductor entry direction 180°, in-line
Mounting type Free-hanging, in-line cable connection
Connector contact type Male pins
Connection applications Wire-to-wire and board-to-wire assemblies with compatible mating components
Coding provision Coding fingers
Contact pitch span 65 mm across thirteen intervals
Connector body length 73.2 mm
Reference length L1 71.5 mm
Reference length L2 72 mm
Insulation height 14.3 mm
Connector depth 27.5 mm
Contact material Electrolytic copper
Contact plating Tin
Insulation material Polyamide PA66
Operating temperature range −60 °C to +100 °C
Flammability classification UL 94 V-0
Applicable connector standard IEC/EN 61984
Related approval standards UL 1059 and UL 1977
RoHS compliance Compliant
Country of origin Germany
EAN 4044918258579

Frequently Asked Questions

What is the WAGO 231-614 used for?

The WAGO 231-614 is a 14-pole male pluggable connector designed for detachable electrical connections in industrial automation, control cabinets and electronic equipment. It uses CAGE CLAMP® spring pressure conductor termination and belongs to the WAGO MCS MIDI Classic 231 Series.

What is the difference between WAGO 231-614 and its mounting variants?

The standard WAGO 231-614 is a free-hanging in-line male connector. Other variants include the 231-614/018-000 with snap-in mounting feet, the 231-614/019-000 with a clamping collar and the 231-614/114-000 with a snap-in flange. Select the configuration that matches the intended mechanical installation.

What conductor sizes can the WAGO 231-614 accommodate?

The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm², corresponding to 28–12 AWG. The recommended conductor strip length is 8–9 mm, and conductor termination is performed using an appropriate operating tool.

What are the electrical ratings of the WAGO 231-614?

The WAGO 231-614 has an IEC rated current of 12 A, with rated voltages of 320 V under category III/3 and 630 V under category II/2. Its UL rating is 15 A at 600 V. The complete assembly must operate within the applicable ratings of the connector and its mating component.

Can the WAGO 231-614 be connected or disconnected under load?

No. WAGO MCS MIDI Classic connectors have no load-breaking capability and must not be connected or disconnected while live or under load. Equipment must be safely isolated before separation, and exposed male contacts must not remain energised when unmated.

Trusted by Industrial Automation Professionals Worldwide

WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, electronic control equipment and OEM machinery. The WAGO 231-614 combines fourteen connection positions, compact 5 mm spacing, CAGE CLAMP® spring pressure technology and durable industrial construction to support efficient wiring, modular equipment assembly and reliable electrical connections.