Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.68
The WAGO 231-614/114-000 is a 14-pole male pluggable connector with an integrated snap-in flange, designed for secure electrical interconnections in industrial automation, control panels and electronic equipment. Part of the WAGO MCS MIDI Classic 231 Series, it combines proven CAGE CLAMP® spring pressure connection technology, a 5 mm contact pitch and conductor compatibility up to 2.5 mm².
The connector's distinguishing feature is its snap-in flange mounting arrangement, designed to retain the connector in a compatible panel opening. This makes it particularly useful for through-panel electrical interfaces, where external wiring needs to connect to internal equipment through a detachable multi-pole connection. Its 14-pole configuration accommodates multiple independent circuits while keeping wiring organised and accessible.
With an IEC rated current of 12 A, an IEC rated voltage of 320 V under overvoltage category III, pollution degree 3 conditions and a rating of up to 630 V under category II, pollution degree 2 conditions, the WAGO 231-614/114-000 is suitable for appropriately designed industrial electrical assemblies. Its grey insulating housing, tin-plated contacts and screwless conductor termination make it a practical choice for professional equipment manufacturing and maintenance.
The WAGO MCS MIDI Classic 231 Series provides modular electrical connection solutions for industrial automation, machinery and electronic equipment. Its CAGE CLAMP® spring pressure technology maintains electrical contact through a resilient clamping mechanism, supporting reliable conductor termination without conventional terminal screws. The connector system also enables convenient cable pre-assembly and on-unit wiring using suitable operating tools.
The WAGO 231-614/114-000 is specifically designed with an integrated snap-in flange, distinguishing it from standard free-hanging connector variants and versions with alternative mounting arrangements. Its flange allows the male connector to be retained in a compatible panel opening, creating an accessible detachable interface for equipment wiring.
When selecting mating components, engineers should verify the 14-pole configuration, 5 mm pitch, mechanical compatibility and coding arrangement. The WAGO MCS connector system does not provide load-breaking capability and must not be connected or disconnected while energised or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 14 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-614/114-000 | |
| Series | MCS MIDI Classic 231 | |
| Product description | 1-conductor male connector with CAGE CLAMP® and snap-in flange | |
| Product category | Pluggable electrical connectors | |
| Connector gender | Male | |
| Number of connection positions | 14 | |
| Number of levels | 1 | |
| Contact arrangement | Single row | |
| Nominal contact pitch | 5 mm | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Conductor entry relative to mating direction | 180° plug wire entry | |
| Mounting type | Snap-in flange | |
| Installation arrangement | Panel and through-panel mounting | |
| Panel cut-out dimensions | Refer to WAGO's product-specific mounting drawing | |
| Compatible housing sheet thickness | Confirm against WAGO's product-specific mounting drawing | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulation material | Polyamide PA66 | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Applicable standards | IEC/EN 61984, UL 1059 and UL 1977 | |
| Country of origin | Germany | |
| Manufacturer product reference | WAGO 231-614/114-000 |
The WAGO 231-614/114-000 is a 14-pole male pluggable connector from the MCS MIDI Classic 231 Series, featuring CAGE CLAMP® spring pressure conductor termination and an integrated snap-in flange for panel mounting.
The connector has 14 poles, providing fourteen independent electrical connection positions arranged in a single row with a nominal 5 mm contact pitch.
The snap-in flange provides mechanical retention when the connector is installed in a compatible equipment panel or enclosure opening. It supports secure through-panel electrical connections without requiring a conventional screw-mounted flange.
The connector supports solid and fine-stranded copper conductors from 0.08 to 2.5 mm², corresponding to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25 to 1.5 mm².
The WAGO 231-614/114-000 uses CAGE CLAMP® spring pressure technology, which secures conductors through a spring mechanism rather than conventional terminal screws.
The connector has a nominal 5 mm contact pitch, providing a compact arrangement of fourteen electrical connection positions.
The WAGO 231-614/114-000 has an IEC rated current of 12 A. Its UL 1977 rating is 15 A, subject to the applicable approval and installation conditions.
Its IEC voltage ratings include 320 V under overvoltage category III, pollution degree 3 conditions and 630 V under category II, pollution degree 2 conditions. The UL 1977 voltage rating is 600 V.
It is a male pluggable connector, intended for use with compatible female mating components from the WAGO MCS MIDI Classic connector system.
The connector is intended for compatible 14-pole WAGO MCS MIDI Classic female components with corresponding 5 mm contact spacing. Mechanical compatibility, coding and the complete connector configuration must be verified before selection.
No. WAGO MCS MIDI Classic connectors do not provide load-breaking capability. The circuit must be de-energised before mating or unmating the connector, and accessible male contacts must not remain live when disconnected.
Yes. Its fourteen-pole arrangement, CAGE CLAMP® termination and integrated snap-in flange make it suitable for industrial control panels and equipment requiring secure, detachable panel-mounted electrical connections.
WAGO MCS MIDI Classic connectors are established components in industrial automation, electrical engineering and OEM equipment manufacturing. The WAGO 231-614/114-000 combines fourteen CAGE CLAMP® conductor connections, an integrated snap-in flange and dependable pluggable connectivity to support organised electrical interfaces in industrial control systems, electronic equipment and machinery.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.