Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.37
The WAGO 231-612 is a 12-pole male pluggable connector from the WAGO MCS MIDI Classic 231 series, designed for reliable electrical connections in industrial automation, control panels and electronic equipment. Featuring CAGE CLAMP® spring pressure connection technology, a 5 mm contact pitch and a compact single-row design, this connector provides a practical solution for connecting multiple electrical circuits through one detachable interface.
The WAGO 231-612 provides twelve independent electrical connection positions, each accepting one conductor. Its screwless CAGE CLAMP® termination system accommodates solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–12 AWG. Spring pressure termination eliminates the need for conventional terminal screws, helping maintain consistent contact pressure in industrial environments.
With an IEC rated current of 12 A, voltage ratings of 320 V or 630 V depending on the applicable installation conditions, and a durable grey PA66 housing, the WAGO 231-612 is suitable for a wide range of industrial control and equipment wiring applications.
Its free-hanging, in-line mounting configuration supports flexible cable pre-assembly and equipment wiring. Unlike the /018-000 and /019-000 variants, the standard 231-612 does not incorporate dedicated snap-in mounting feet or a mounting flange.
Electrical rating note: The applicable current and voltage ratings depend on the relevant approval standard, overvoltage category, pollution degree, conductor size and mating arrangement. The material temperature limit range does not mean that the connector can carry its full rated current at every temperature.
The WAGO 231-612 provides a convenient solution for connecting multiple electrical circuits through a single detachable connector interface. Its twelve-pole arrangement is useful in industrial machinery, control systems and modular equipment where organised wiring and accessible electrical connections are important.
The connector uses a 5 mm contact pitch, providing consistent spacing between all twelve electrical positions. Its compact, single-row construction allows multiple conductors to be grouped within one connector assembly, helping simplify cable routing and electrical equipment installation.
As part of the WAGO MCS MIDI Classic system, the 231-612 supports modular wire-to-wire and board-to-wire connections when paired with a compatible female connector or PCB header. The selected mating component must match the twelve-pole arrangement, contact pitch, coding and applicable electrical ratings.
The WAGO 231-612 incorporates CAGE CLAMP® spring pressure technology to secure electrical conductors without conventional terminal screws. The spring mechanism applies consistent contact pressure, helping maintain reliable electrical performance under normal industrial vibration and temperature variation.
The connector accepts solid and fine-stranded conductors from 0.08–2.5 mm², making it suitable for a range of industrial wiring applications. Fine-stranded conductors fitted with appropriate ferrules can also be used within the specified conductor ranges.
Spring clamp operation is possible both parallel and perpendicular to the conductor entry direction, providing flexibility during cable assembly and equipment wiring. The specified 8–9 mm stripping length supports correct conductor insertion when used with the appropriate WAGO operating tool.
The WAGO 231-612 is a pluggable connector without load-breaking capability. It must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before mating or unmating, and the circuit design must prevent accessible male contacts from remaining energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 12 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-612 | |
| Series | MCS MIDI Classic 231 | |
| Product type | 1-conductor male pluggable connector | |
| Connector gender | Male | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Number of potentials | 12 | |
| Number of connection points | 12 | |
| Connections per pole | 1 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Contact arrangement | Single row | |
| Contact pitch | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, category III, pollution degree 3) | 320 V | |
| Rated voltage (IEC, category III, pollution degree 2) | 320 V | |
| Rated voltage (IEC, category II, pollution degree 2) | 630 V | |
| Rated surge voltage (IEC) | 4 kV | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Wire stripping length | 8–9 mm | |
| Connection actuation | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Conductor entry direction | 0° relative to mating direction | |
| Mounting type | Free-hanging / in-line | |
| Connector interface | Male plug contacts | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Material group | I | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 63.2 mm | |
| Height | 14.3 mm | |
| Depth | 27.5 mm | |
| Dimensions (W × H × D) | 63.2 × 14.3 × 27.5 mm | |
| Weight | Approximately 18.04 g | |
| Packaging unit | 25 pieces | |
| Country of origin | Germany | |
| Connector system | WAGO Multi Connection System (MCS) | |
| Applicable connector standard | IEC 61984 |
The WAGO 231-612 is a 12-pole male pluggable connector used in industrial automation, electrical control panels and modular wiring systems. It provides twelve electrical connection positions using CAGE CLAMP® spring pressure technology.
The connector has 12 poles, providing twelve independent electrical potentials with one conductor connection per pole. The contacts are arranged in a single row with a 5 mm pitch.
The WAGO 231-612 has an IEC rated current of 12 A and a UL 1977 rated current of 15 A. The permissible current depends on the applicable certification, conductor size, mating component and installation conditions.
The connector is rated at 320 V under IEC overvoltage category III conditions and 630 V under IEC overvoltage category II, pollution degree 2 conditions. Its UL 1977 rating is 600 V.
The WAGO 231-612 accepts solid and fine-stranded conductors from 0.08–2.5 mm², corresponding to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm².
The standard WAGO 231-612 has a free-hanging, in-line configuration. Variants with snap-in mounting feet or mounting flanges are available separately for installations requiring dedicated mechanical mounting features.
CAGE CLAMP® is WAGO's spring pressure conductor connection system. It secures conductors without conventional terminal screws, maintaining consistent contact pressure and supporting reliable electrical connections in industrial environments.
The specified conductor stripping length is 8–9 mm. Conductors should be prepared according to WAGO's installation instructions and inserted using the appropriate operating tool.
The WAGO 231-612 measures 63.2 mm wide, 14.3 mm high and 27.5 mm deep.
Both connectors belong to the WAGO MCS MIDI Classic 231 series and feature twelve poles, a 5 mm pitch and CAGE CLAMP® conductor termination. The standard 231-612 is a free-hanging connector, while the 231-612/018-000 features integrated snap-in mounting feet for suitable DIN-35 rail and panel mounting.
The WAGO 231-612 is designed for use with compatible 12-pole WAGO MCS MIDI Classic female mating connectors featuring a 5 mm contact pitch. The mating component must also match the mechanical coding and applicable electrical ratings.
No. WAGO MCS MIDI Classic connectors are not intended for load-breaking operation. The connector must not be connected or disconnected while live or under load. Electrical circuits must be safely isolated before mating or unmating.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical connections for industrial automation, machine building and control equipment. The WAGO 231-612 combines proven CAGE CLAMP® spring pressure technology, a twelve-pole connection arrangement and a compact in-line design to support organised wiring, efficient installation and serviceable industrial electrical systems.
Manufacturer reference: WAGO 231-612 Product Information.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.