Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.84
The WAGO 231-612/114-000 is a 12-pole male pluggable connector with an integrated snap-in flange, designed for reliable electrical interconnections in industrial automation, control panels and electronic equipment. Part of the WAGO MCS MIDI Classic 231 Series, this connector combines proven CAGE CLAMP® spring pressure technology, a 5 mm contact pitch and conductor compatibility up to 2.5 mm².
Its distinguishing feature is the snap-in flange mounting system, which enables secure installation in compatible equipment panels and feedthrough openings. Designed for housing sheet thicknesses from 0.5 to 2.5 mm, the snap-in arrangement provides mechanical retention without relying solely on the mating connector. This makes the WAGO 231-612/114-000 particularly suitable for panel-mounted wiring interfaces where accessibility, compact dimensions and secure positioning are important.
With 12 independent connection positions, an IEC rated current of 12 A and a rated voltage of up to 630 V under IEC overvoltage category II, pollution degree 2 conditions, the connector supports a wide range of industrial electrical applications. Its grey polyamide PA66 housing, tin-plated copper contacts and screwless conductor termination provide a practical solution for modular equipment wiring and maintenance.
The WAGO MCS MIDI Classic 231 Series provides dependable modular electrical connection solutions for industrial automation, machinery and electronic equipment. Its CAGE CLAMP® spring pressure technology maintains conductor contact through a resilient clamping mechanism, supporting secure termination without conventional screw tightening. Vertical and horizontal actuation options within the connector family simplify cable pre-assembly and on-unit wiring.
The WAGO 231-612/114-000 is specifically equipped with a snap-in flange, distinguishing it from standard free-hanging connector variants and versions with alternative mounting arrangements. Its panel-retention design supports installation through compatible housing openings, creating an accessible detachable wiring interface. When selecting mating components, engineers should verify the pole configuration, contact pitch, coding and mechanical compatibility. The MCS connector system does not provide load-breaking capability and must not be connected or disconnected while energised or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 12 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-612/114-000 | |
| Series | MCS MIDI Classic 231 | |
| Product type | Male pluggable connector with snap-in flange | |
| Product category | Industrial pluggable connectors | |
| Number of clamping points | 12 | |
| Number of potentials | 12 | |
| Number of levels | 1 | |
| Nominal contact pitch | 5 mm | |
| Connection technology | CAGE CLAMP® | |
| Conductor termination | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| Connector contact type | Male plug | |
| Conductor entry direction relative to mating direction | 0° | |
| Mounting type | Snap-in flange and feedthrough mounting | |
| Compatible housing sheet thickness | 0.5–2.5 mm | |
| Width | 81 mm | |
| Height | 17.5 mm | |
| Depth | 27.5 mm | |
| Insulation material | Polyamide PA66 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Approximate weight | 20.15 g | |
| GTIN | 4050821216100 | |
| Country of origin | Germany | |
| Applicable connector standard | IEC/EN 61984 |
The WAGO 231-612/114-000 is a 12-pole male pluggable connector from the MCS MIDI Classic 231 Series. It features CAGE CLAMP® spring pressure conductor termination and an integrated snap-in flange for panel and feedthrough mounting.
The connector has 12 poles, providing twelve independent electrical connection positions with a nominal 5 mm contact pitch.
The snap-in flange provides mechanical retention when the connector is installed in a compatible equipment panel or housing opening. It supports secure feedthrough mounting and helps maintain connector positioning during normal installation and servicing.
The WAGO 231-612/114-000 is designed for compatible housing sheet thicknesses from 0.5 to 2.5 mm. The panel opening should follow WAGO's specified mounting dimensions.
The connector supports solid and fine-stranded copper conductors from 0.08 to 2.5 mm², corresponding to 28–12 AWG. Ferruled conductor ranges depend on the ferrule construction.
The WAGO 231-612/114-000 uses CAGE CLAMP® spring pressure technology, which secures conductors using a spring mechanism rather than conventional terminal screws.
The connector has an IEC rated current of 12 A. Under applicable UL approvals, ratings include 15 A for specified use groups and conditions.
Its IEC voltage ratings include 320 V under overvoltage category III, pollution degree 3 conditions and 630 V under overvoltage category II, pollution degree 2 conditions. The applicable rating depends on the complete connector arrangement and installation conditions.
The connector measures 81 mm wide, 17.5 mm high and 27.5 mm deep. Its snap-in flange should also be considered when designing the equipment panel opening.
It is a male pluggable connector, intended for use with compatible female mating components from the WAGO MCS MIDI Classic connector system.
No. The WAGO MCS MIDI Classic connector system does not provide load-breaking capability. The circuit must be de-energised before mating or unmating the connector, and accessible male contacts must not remain live when disconnected.
Yes. Its twelve-pole arrangement, CAGE CLAMP® conductor termination and integrated snap-in flange make it suitable for industrial control panels and equipment requiring secure, detachable panel-mounted electrical connections.
WAGO MCS MIDI Classic connectors are established components in industrial automation, electrical engineering and OEM equipment manufacturing. The WAGO 231-612/114-000 combines twelve CAGE CLAMP® conductor connections, a secure snap-in flange mounting arrangement and dependable pluggable connectivity to support organised electrical interfaces in industrial control systems and machinery.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.