Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.22
The WAGO 231-612/035-000 is a 12-pole male pluggable connector from the WAGO MCS MIDI Classic 231 series, designed for reliable multi-circuit connections in industrial automation, control equipment and electrical machinery. Featuring CAGE CLAMP® spring pressure connection technology and a 5 mm contact pitch, this connector offers a practical solution for organising twelve electrical connections within a single detachable interface.
The connector belongs to WAGO's established modular connection system, which supports efficient cable pre-assembly, straightforward conductor termination and convenient servicing of electrical equipment. Its spring clamp terminals eliminate conventional terminal screws, helping maintain consistent electrical contact without routine screw retightening.
The standard WAGO 231-612 connector family supports solid and fine-stranded conductors from 0.08–2.5 mm², with an IEC rated current of 12 A and a grey flame-retardant insulating housing. The /035-000 suffix identifies a specific configuration within the connector family; the exact mechanical features and any strain-relief provision should be confirmed against the variant-specific WAGO drawing.
Suitable for industrial wiring harnesses, machine interfaces and modular control systems, the WAGO 231-612/035-000 combines a compact twelve-pole arrangement with the flexibility of a pluggable electrical connection.
Specification note: The ratings, conductor capacities, housing details and standard dimensions above describe the WAGO 231-612 connector family. The exact construction of 231-612/035-000 has not been independently established from a variant-specific manufacturer datasheet. Verify its mechanical features, overall dimensions, accessories and approvals before finalising an equipment design.
The WAGO 231-612/035-000 provides twelve connection positions in a compact male connector format, making it suitable for industrial equipment requiring several electrical circuits to pass through one detachable interface.
This arrangement is particularly useful in control cabinets, modular machinery and pre-assembled cable harnesses. Instead of terminating every circuit at a separate connection point during final installation, compatible pluggable connectors can allow cable assemblies to be prepared and tested before they are fitted to the equipment.
The 5 mm contact pitch supports consistent terminal spacing, while the MCS MIDI Classic system offers a range of mating connector and mounting arrangements for different equipment designs.
Where additional cable retention is required, the appropriate strain-relief components must be selected according to the exact connector variant and WAGO's compatibility information. A strain-relief plate or housing should not be assumed to be included unless explicitly confirmed in the manufacturer's product description.
WAGO's CAGE CLAMP® technology is designed to maintain reliable electrical contact using a spring pressure mechanism rather than conventional terminal screws. This reduces the need for tightening operations during assembly and avoids routine terminal screw retightening.
The standard 231-612 connection system accommodates solid and fine-stranded conductors from 0.08–2.5 mm², offering flexibility across a range of industrial control wiring applications.
Conductors are inserted and removed using an appropriate WAGO operating tool. The standard family specifies a conductor stripping length of 8–9 mm, although the installation instructions for the exact /035-000 configuration should always take precedence.
The connector must be used with a suitable mating component that matches its pole count, pitch, contact arrangement, mechanical coding and electrical requirements. The MCS MIDI Classic system does not provide load-breaking capability, so connectors must not be mated or unmated while live or under load.
| Manufacturer | WAGO |
|---|---|
| Manufacturer part number | 231-612/035-000 |
| Series | MCS MIDI Classic 231 |
| Product category | Pluggable electrical connector |
| Product type | Male connector with CAGE CLAMP® termination |
| Connector gender | Male |
| Number of poles | 12 |
| Number of connection positions | 12 |
| Contact pitch | 5 mm |
| Connection technology | CAGE CLAMP® spring pressure connection |
| Connection actuation | Operating tool |
| Rated current (IEC, standard 231-612 family) | 12 A |
| Rated voltage (IEC, category III, pollution degree 3, standard family) | 320 V |
| Rated voltage (IEC, category III, pollution degree 2, standard family) | 320 V |
| Rated voltage (IEC, category II, pollution degree 2, standard family) | 630 V |
| Rated impulse voltage (IEC, standard family) | 4 kV |
| Rated current (UL 1977, standard family) | 15 A |
| Rated voltage (UL 1977, standard family) | 600 V |
| Solid conductor cross-section (standard family) | 0.08–2.5 mm² |
| Fine-stranded conductor cross-section (standard family) | 0.08–2.5 mm² |
| Fine-stranded conductor with insulated ferrule (standard family) | 0.25–1.5 mm² |
| Fine-stranded conductor with uninsulated ferrule (standard family) | 0.25–2.5 mm² |
| Conductor size (standard family) | 28–12 AWG |
| Wire stripping length (standard family) | 8–9 mm |
| Contact material (standard family) | Electrolytic copper |
| Contact plating (standard family) | Tin |
| Clamping spring material (standard family) | Chrome-nickel spring steel |
| Insulating material (standard family) | Polyamide 66 (PA66) |
| Housing colour (standard family) | Grey |
| Flammability classification (standard family) | UL94 V-0 |
| Material temperature limit range (standard family) | −60 to +100 °C |
| Standard 231-612 body width | 63.2 mm |
| Standard 231-612 body height | 14.3 mm |
| Standard 231-612 body depth | 27.5 mm |
| Variant-specific overall dimensions | Refer to WAGO documentation for 231-612/035-000 |
| Variant-specific mounting and strain-relief details | Manufacturer confirmation required |
| Connector system | WAGO Multi Connection System (MCS) |
| Applicable connector standard | IEC 61984 |
The WAGO 231-612/035-000 is a 12-pole male pluggable connector intended for industrial automation, electrical control equipment and modular wiring assemblies. It provides twelve conductor connection positions using CAGE CLAMP® spring pressure technology.
The connector has 12 poles, with twelve connection positions arranged on a 5 mm pitch.
The standard WAGO 231-612 connector family has an IEC rated current of 12 A. The applicable rating for the /035-000 configuration should be confirmed using its manufacturer documentation and the selected mating component.
The standard WAGO 231-612 CAGE CLAMP® connection system supports solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–12 AWG. Confirm any variant-specific restrictions before installation.
The exact strain-relief arrangement of the 231-612/035-000 has not been confirmed from a variant-specific WAGO datasheet. WAGO offers strain-relief configurations and accessories within the 231 series, but inclusion and compatibility must be verified for this exact part number.
CAGE CLAMP® is WAGO's spring pressure conductor termination system. It secures electrical conductors without conventional terminal screws and maintains contact pressure through a mechanical spring mechanism.
The connector belongs to the WAGO 231 series, which uses a 5 mm contact pitch for this twelve-pole connector configuration.
The standard WAGO 231-612 connector specifies a stripping length of 8–9 mm. Follow the manufacturer's installation instructions for the exact /035-000 variant.
The 231-612 is the standard 12-pole male CAGE CLAMP® connector. The 231-612/035-000 is a separately identified configuration within the same series. Its precise mechanical differences should be verified from WAGO's variant-specific documentation rather than assumed from the suffix alone.
Suitable mating components must match the 12-pole arrangement, 5 mm pitch, contact configuration and mechanical coding. Consult WAGO's compatibility information before selecting a female connector or mating header.
No. WAGO MCS MIDI Classic connectors are not designed for load-breaking operation. They must not be connected or disconnected while live or under load. Electrical circuits must be safely isolated before mating or unmating.
The WAGO MCS MIDI Classic 231 series offers a practical connection system for industrial automation, control equipment and modular machinery. The WAGO 231-612/035-000 provides a twelve-pole male connector interface with CAGE CLAMP® spring termination, supporting organised cable assemblies and serviceable electrical connections.
Manufacturer series reference: WAGO 231-612 Connector Family.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.