Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.98
The WAGO 231-612/023-000 is a 12-pole PCB terminal block designed for secure electrical connections between field wiring and printed circuit boards. Featuring CAGE CLAMP® spring pressure connection technology, a 5 mm pin spacing and an integrated clamping collar with mounting flanges, this terminal strip provides a reliable connection solution for industrial automation, control electronics and electrical equipment manufacturing.
Part of the WAGO 231 series, the 231-612/023-000 accommodates conductors up to 2.5 mm² and provides twelve individual connection positions in a single-row arrangement. Its screwdriver-actuated spring clamps simplify conductor termination without conventional terminal screws, while the PCB mounting arrangement supports permanent electrical connections to electronic assemblies.
With an IEC rated current of 16 A, a nominal voltage of 320 V under overvoltage category III conditions and a grey PA66 insulating housing, the WAGO 231-612/023-000 is suited to professional industrial wiring applications. Its mounting flanges allow installation flush with an enclosure or protruding through a front panel, providing flexibility when designing accessible electrical connection interfaces.
Unlike the standard WAGO 231-612 male pluggable connector, the 231-612/023-000 is a PCB terminal block with a clamping collar. It is designed for direct PCB integration rather than use as a detachable male plug.
Technical note: The WAGO 231-612/023-000 has an IEC rated current of 16 A, which differs from the 12 A IEC rating of the standard WAGO 231-612 male pluggable connector. Electrical ratings and mounting dimensions must be selected using documentation for the exact part number, rather than another variant in the 231 series.
The WAGO 231-612/023-000 is designed for electronic equipment requiring a permanent PCB connection and an accessible conductor termination interface. Its mounting flanges provide mechanical support for installations where the terminal strip is positioned at or through an enclosure panel.
The design supports flush-mounted and protruding front-panel arrangements, allowing equipment designers to choose a connection layout suited to the enclosure and wiring requirements. The integrated clamping collar helps maintain a secure installation, while the solder connections provide the electrical interface to the PCB.
WAGO specifies a mounting arrangement suitable for enclosure panel thicknesses up to 1.5 mm. PCB footprint, panel cut-out dimensions and mechanical clearances should follow the manufacturer's dimensional drawing to ensure correct alignment and prevent excessive stress on the solder joints.
The WAGO 231-612/023-000 uses CAGE CLAMP® spring pressure technology to secure electrical conductors. The spring mechanism applies consistent contact pressure without requiring conventional terminal screws or a terminal tightening torque.
The terminals are operated using a suitable screwdriver or WAGO operating tool, enabling conductors to be inserted and removed during equipment assembly or servicing. This connection method is well suited to industrial control electronics where reliable conductor retention and efficient maintenance are important.
The terminal strip accommodates conductors from 0.08–2.5 mm², providing flexibility for different control and equipment wiring requirements. The exact permitted conductor construction, ferrule arrangement and stripping length should be checked against the manufacturer's installation instructions.
With twelve independent connection positions on a 5 mm pitch, the WAGO 231-612/023-000 provides a convenient way to organise multiple electrical circuits at a single PCB interface. Its single-row configuration also simplifies terminal identification, cable routing and inspection.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 12 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-612/023-000 | |
| Series | WAGO 231 | |
| Product type | PCB terminal block | |
| Product configuration | Feedthrough PCB terminal strip with clamping collar | |
| Number of contacts | 12 | |
| Number of rows | 1 | |
| Contact pitch | 5 mm | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation method | Screwdriver / operating tool | |
| Rated current (IEC) | 16 A | |
| Nominal voltage (IEC, category III, pollution degree 3) | 320 V | |
| Nominal voltage (IEC, category III, pollution degree 2) | 320 V | |
| Nominal voltage (IEC, category II, pollution degree 2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group C) | 150 V | |
| Rated current (UL 1059, Use Group C) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Minimum conductor cross-section | 0.08 mm² | |
| Maximum conductor cross-section | 2.5 mm² | |
| Conductor size | 28–14 AWG | |
| PCB mounting | Through-hole solder connection | |
| Mechanical mounting | Integrated mounting flanges | |
| Clamping collar | Yes | |
| Front-panel mounting | Supported | |
| Maximum panel thickness | 1.5 mm | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Width | 75.2 mm | |
| Depth | 19.1 mm | |
| Packaging unit | 25 pieces | |
| Country of origin | Germany | |
| RoHS compliance | Compliant | |
| Electrical rating standard | IEC/EN 60664-1 | |
| UL approval standard | UL 1059 |
The WAGO 231-612/023-000 is a 12-pole PCB terminal block used to connect electrical conductors to printed circuit boards in industrial automation, control equipment and front-panel wiring assemblies.
The terminal block has 12 poles, providing twelve electrical connection positions arranged in a single row with a 5 mm pitch.
No. The 231-612/023-000 is a PCB terminal block with a clamping collar and mounting flanges. It should not be confused with the standard WAGO 231-612, which is a male pluggable connector.
The terminal block has an IEC rated current of 16 A. Its UL 1059 rating is 15 A for Use Groups B and C and 10 A for Use Group D. The applicable rating depends on the approval and installation conditions.
The terminal block has an IEC nominal voltage of 320 V under overvoltage category III conditions and 630 V under overvoltage category II, pollution degree 2 conditions. UL 1059 voltage ratings depend on the applicable use group.
The WAGO 231-612/023-000 supports conductors from 0.08–2.5 mm². The precise permitted conductor types and ferrule arrangements should be confirmed against WAGO's installation documentation.
The terminal block uses through-hole PCB solder connections and incorporates mounting flanges with a clamping collar. It can be installed at a front panel in flush-mounted or protruding configurations, subject to the manufacturer's mounting requirements.
The WAGO 231-612/023-000 is designed for panel arrangements with a maximum sheet thickness of 1.5 mm. Panel cut-outs and fixing dimensions should follow the manufacturer's dimensional drawing.
CAGE CLAMP® is WAGO's spring pressure conductor termination system. It secures electrical conductors without conventional terminal screws, maintaining contact pressure through a mechanical spring mechanism.
The terminal block has an overall width of 75.2 mm and a depth of 19.1 mm. The complete dimensional drawing should be consulted when designing PCB footprints and panel openings.
The standard WAGO 231-612 is a 12-pole male pluggable connector rated at 12 A IEC. The 231-612/023-000 is a 12-pole PCB terminal block with a clamping collar, mounting flanges and a 16 A IEC rated current. They are different connection configurations and should not be treated as interchangeable.
WAGO PCB terminal blocks provide reliable conductor-to-board connections for industrial automation, control electronics and equipment manufacture. The WAGO 231-612/023-000 combines twelve CAGE CLAMP® spring pressure terminals with a 5 mm pitch, a 16 A IEC rating and mechanically supported PCB and front-panel mounting features, helping create organised and serviceable electrical interfaces.
Manufacturer reference: WAGO 231-612/023-000 Product Information.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.