Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.37
The WAGO 231-612/018-000 is a 12-pole male pluggable connector with snap-in mounting feet, designed for dependable electrical connections in industrial automation, machinery and control systems. Part of the WAGO MCS MIDI Classic 231 Series, it combines proven CAGE CLAMP® spring pressure technology with a 5 mm contact pitch and a practical mounting arrangement for industrial electrical assemblies.
Unlike the standard free-hanging WAGO 231-612 connector, the 231-612/018-000 features snap-in mounting feet for installation in suitable panel or DIN-35 rail mounting arrangements. This provides a convenient way to position and support the connector while maintaining a detachable electrical interface for compatible female connectors.
With a rated current of 12 A (IEC), a conductor connection range of 0.08–2.5 mm² and twelve independent connection positions, the WAGO 231-612/018-000 is well suited to organised multi-circuit wiring. Its grey insulating housing, screwless conductor terminals and mechanical mounting features make it a practical choice for equipment manufacturers, control panel builders and industrial maintenance engineers.
The WAGO 231-612/018-000 combines two important installation features: CAGE CLAMP® spring pressure conductor termination and snap-in mounting feet. The spring clamp provides a secure electrical connection without relying on a screw-tightening torque, while the mounting feet allow the connector to be mechanically positioned and supported in an appropriate panel or mounting assembly.
Its 12-pole configuration allows multiple circuits to be grouped within one detachable connection interface. This is particularly useful for control equipment, industrial cable harnesses and modular machinery where wiring needs to remain organised and accessible. The snap-in mounting arrangement can also help reduce unwanted connector movement compared with an unsupported free-hanging cable assembly.
Correct installation requires a compatible female connector, an appropriate mounting arrangement and conductors prepared to the manufacturer's instructions. The snap-in mounting feet do not replace the need for suitable cable strain relief where external cable forces are expected. As the connector is not intended for load-breaking operation, it must not be connected or disconnected while energised or under load, and exposed male contacts must be protected from hazardous voltages.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 12 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-612/018-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Male pluggable connector with snap-in mounting feet | |
| Connector gender | Male | |
| Number of connection points | 12 | |
| Number of electrical potentials | 12 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Mounting type | Snap-in mounting feet | |
| Mounting arrangement | DIN-35 rail/panel mounting | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, II/2) | 4 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Connection technology | CAGE CLAMP® | |
| Conductor termination | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Compatible conductor types | Solid and fine-stranded copper conductors | |
| Conductor stripping length | 8–9 mm | |
| Plug wire entry | 180° inline | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability rating | UL 94 V-0 | |
| Temperature range | −60 to +100 °C | |
| Width | 63.2 mm | |
| Height | 18.8 mm | |
| Depth | 27.5 mm | |
| Approximate weight | 18.5 g | |
| Connector standard | IEC/EN 61984 | |
| Connector system | WAGO MCS – MULTI CONNECTION SYSTEM | |
| Country of origin | Germany | |
| EAN / GTIN | 4044918258340 |
The WAGO 231-612/018-000 is a 12-pole male pluggable connector used for detachable electrical connections in industrial automation, control equipment and modular wiring systems. Its snap-in mounting feet support installation in suitable DIN-35 rail or panel mounting arrangements.
Yes. The 231-612/018-000 is specifically designed with snap-in mounting feet for mechanical support in compatible mounting arrangements. This distinguishes it from the standard free-hanging WAGO 231-612 connector.
The connector has a rated current of 12 A under IEC specifications and 15 A under UL specifications. The permissible operating current depends on the conductor size, mating connector and installation conditions.
The connector supports copper conductors from 0.08 to 2.5 mm² (28–12 AWG). The recommended conductor stripping length is 8–9 mm, and a suitable operating tool is used to open the CAGE CLAMP® terminal during wiring.
The standard WAGO 231-612 is a 12-pole male pluggable connector intended for free-hanging inline applications, while the 231-612/018-000 adds snap-in mounting feet for suitable panel or DIN-35 rail mounting arrangements. Both belong to the WAGO MCS MIDI Classic 231 Series.
WAGO MCS MIDI Classic connectors provide dependable spring pressure connection technology for industrial machinery, control panels and electronic equipment. The WAGO 231-612/018-000 combines twelve independent conductor connections, a compact 5 mm pitch and snap-in mounting feet to support organised, mechanically supported and maintainable industrial wiring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.