Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.98
The WAGO 231-612/017-000 is a 12-pole through-panel PCB terminal block featuring WAGO's proven CAGE CLAMP® spring pressure connection technology. Designed for industrial electronics, electrical control panels and equipment enclosures, this terminal block combines a 5 mm contact pitch, conductor compatibility from 0.08 to 2.5 mm² and an integrated mounting flange with clamping collar for secure installation.
Unlike a detachable cable connector, the WAGO 231-612/017-000 is designed for permanent through-hole PCB soldering. Its angled solder-pin arrangement connects directly to a printed circuit board, while the CAGE CLAMP® terminals provide accessible connections for external conductors. The integrated fixing flanges support panel or feedthrough mounting, making the terminal block particularly useful for creating secure electrical interfaces between internal electronics and field wiring.
With 12 independent connection positions, an IEC rated current of 16 A and IEC voltage ratings of up to 630 V under specified installation conditions, this WAGO terminal block provides a compact and dependable solution for industrial electrical assemblies. Its grey polyamide housing, tin-plated copper contacts and screwless conductor termination make it suitable for professional PCB integration and control equipment manufacturing.
The WAGO 231 Series includes terminal blocks and connector components developed for dependable industrial electrical interconnections. Its CAGE CLAMP® spring pressure technology uses a resilient clamping mechanism to maintain conductor contact, supporting secure electrical termination without conventional screw tightening. The technology accommodates different conductor constructions and simplifies wiring during equipment assembly and maintenance.
The WAGO 231-612/017-000 is specifically configured for through-panel PCB applications. Its twelve angled solder pins establish electrical connections to a printed circuit board, while the integrated mounting flanges and clamping collar provide mechanical support at the equipment panel. This arrangement allows external conductors to be terminated at an accessible interface while maintaining a permanent connection to the internal PCB. Unlike the standard 231-612 male pluggable connector, this variant is a PCB-mounted terminal strip rather than a detachable cable plug.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 12 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-612/017-000 | |
| Series | 231 Series | |
| Product type | Through-panel PCB terminal block | |
| Connector configuration | 12-pole terminal strip with angled solder pins and fixing flanges | |
| Number of connection points | 12 | |
| Number of potentials | 12 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Connection technology | CAGE CLAMP® | |
| Conductor termination | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group C) | 15 A | |
| Rated voltage (UL 1059, Use Group C) | 150 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| PCB contact technology | Through-hole technology (THT) | |
| Solder-pin orientation | Angled | |
| Solder-pin arrangement | In-line across the terminal strip | |
| Solder pins per potential | 1 | |
| Solder-pin length | 4.7 mm | |
| Solder-pin cross-section | 0.8 × 1.3 mm | |
| Recommended drilled-hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Mounting type | Mounting flange, panel mounting and feedthrough mounting | |
| Mounting arrangement | Fixing flanges with clamping collar | |
| Maximum housing sheet thickness | 1.5 mm | |
| Width | 75.2 mm | |
| Height | 19 mm | |
| Height above mounting surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Insulation material | Polyamide PA66 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +105 °C | |
| Approximate weight | 16.7 g | |
| GTIN | 4044918258333 | |
| Country of origin | Germany | |
| Product category | PCB terminal blocks and feedthrough connectors |
The WAGO 231-612/017-000 is a 12-pole through-panel PCB terminal block used to connect external electrical conductors to printed circuit boards in industrial control equipment, machinery and electronic assemblies.
It provides 12 independent electrical connection positions, arranged in a single row with a nominal 5 mm contact pitch.
The terminal block supports solid and fine-stranded copper conductors from 0.08 to 2.5 mm². Fine-stranded conductors with insulated ferrules are supported from 0.25 to 1.5 mm², while those with uninsulated ferrules are supported from 0.25 to 2.5 mm².
The terminal block has an IEC rated current of 16 A. Its IEC voltage ratings include 320 V under overvoltage category III, pollution degree 3 conditions and 630 V under overvoltage category II, pollution degree 2 conditions.
CAGE CLAMP® technology uses a spring pressure mechanism to maintain electrical contact with inserted conductors. An appropriate operating tool opens the clamp for conductor insertion or removal, eliminating conventional screw terminal tightening.
No. This particular variant is a through-panel PCB terminal block with solder pins for permanent PCB installation. It should not be confused with the standard WAGO 231-612 male pluggable connector.
The terminal block uses through-hole PCB soldering together with integrated fixing flanges and a clamping collar. It is intended for panel and feedthrough mounting applications.
The WAGO 231-612/017-000 measures 75.2 mm wide, 19 mm high and 19.1 mm deep. Its height above the mounting surface is 14.3 mm.
The specified drilled-hole diameter is 1.8 mm with a +0.1 mm tolerance. The solder pins are arranged in line, with one pin per potential and a nominal pitch of 5 mm.
The WAGO 231-612/017-000 is designed for compatible housing sheets with a maximum thickness of 1.5 mm.
The terminal block has a specified temperature limit range of −60 to +105 °C. Actual operating limits depend on the complete PCB assembly, electrical loading and installation conditions.
Yes. Its twelve-pole arrangement, CAGE CLAMP® spring pressure connections, through-hole solder pins and integrated mounting flanges make it suitable for industrial control panels and equipment requiring dependable PCB-to-field-wiring connections.
WAGO 231 Series terminal blocks are established electrical connection components used by panel builders, automation engineers and industrial equipment manufacturers. The WAGO 231-612/017-000 combines twelve CAGE CLAMP® conductor connections, secure through-panel mounting and permanent PCB solder termination to support reliable electrical interfaces in industrial control systems and electronic equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.