Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.71
The WAGO 231-611/023-000 is an 11-pole through-panel PCB terminal strip designed for secure conductor connections in industrial automation, electronic control equipment and printed circuit board assemblies. Featuring WAGO's proven CAGE CLAMP® spring pressure connection technology, this terminal strip provides dependable screwless conductor termination alongside an angled solder pin arrangement for PCB integration.
With a 5 mm contact pitch, eleven independent connection positions and a nominal conductor capacity of 2.5 mm², the WAGO 231-611/023-000 provides an efficient solution for multi-circuit electrical connections. Its angled 1 × 1.2 mm solder pins and integrated fixing flanges support through-hole PCB mounting and flush installation in suitable equipment panels.
Rated at 16 A with a 320 V IEC rated voltage under category III/2, this terminal strip combines electrical performance with practical mechanical integration. Its grey polyamide PA66 housing, tin-plated copper contacts and spring pressure conductor termination make it suitable for industrial electronics, control cabinets and OEM equipment requiring reliable PCB-to-conductor connections.
The WAGO 231-611/023-000 provides a dependable interface between external copper conductors and printed circuit boards. Its CAGE CLAMP® spring pressure technology maintains secure conductor contact without conventional terminal screws, supporting efficient wiring and reliable electrical performance.
The angled solder pin arrangement enables horizontal conductor entry relative to the PCB, making this terminal strip suitable for equipment where external wiring must approach the circuit board from the side. The eleven-pole configuration provides multiple electrical connection points while maintaining consistent 5 mm spacing.
The integrated fixing flanges support mechanical installation in suitable PCB and panel assemblies. Designed for flush mounting, the terminal strip can be incorporated into equipment enclosures where accessible external wiring connections and a neat panel interface are important.
Its grey PA66 housing, tin-plated copper contacts and industrial spring clamp construction make the connector suitable for a broad range of control and electronic applications. For dependable operation, PCB hole dimensions, soldering processes, conductor preparation and mounting arrangements should follow WAGO's technical documentation. The complete equipment must remain within the applicable electrical and environmental ratings.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 11 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series | |
| Manufacturer part number | 231-611/023-000 | |
| Product type | Through-panel PCB terminal strip | |
| Connector category | PCB terminal block | |
| Number of connection points | 11 | |
| Number of potentials | 11 | |
| Number of rows | 1 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| UL current rating | 15 A | |
| UL voltage rating | 300 V | |
| Nominal conductor cross-section | 2.5 mm² | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Conductor strip length | 8–9 mm | |
| Conductor termination | Screwless spring clamp | |
| Actuation type | Operating tool | |
| PCB mounting technology | Through-hole solder mounting | |
| PCB contact arrangement | Angled solder pins | |
| Solder pin cross-section | 1 × 1.2 mm | |
| Solder pin length | 4.7 mm | |
| Maximum PCB thickness | 1.5 mm | |
| Mounting type | PCB and panel mounting | |
| Installation arrangement | Flush mounting | |
| Conductor orientation | Horizontal relative to PCB | |
| Width | 70.2 mm | |
| Height | 19 mm | |
| Depth | 19.1 mm | |
| Weight | Approximately 15.27 g | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulation material | Polyamide PA66 | |
| Operating temperature range | −60 °C to +105 °C | |
| Flammability classification | UL 94 V-0 | |
| Standards and approvals | IEC/EN 60664-1, UL 1059 and CSA | |
| RoHS compliance | Compliant | |
| Country of origin | Germany |
The WAGO 231-611/023-000 is an 11-pole through-panel PCB terminal strip used to connect copper conductors to printed circuit boards in industrial automation, control equipment and electronic assemblies. It features CAGE CLAMP® spring pressure terminals, angled solder pins and integrated fixing flanges.
The /023-000 configuration features angled 1 × 1.2 mm solder pins, integrated fixing flanges and a design suitable for flush panel mounting. These features distinguish it from the standard 231-611 male pluggable connector.
The terminal strip accepts solid and fine-stranded copper conductors from 0.08–2.5 mm², corresponding to 28–14 AWG. The recommended conductor strip length is 8–9 mm.
The WAGO 231-611/023-000 has an IEC rated current of 16 A, a 320 V rated voltage under category III/2 and a 630 V rating under category II/2. Its UL rating is 15 A at 300 V. The finished assembly must remain within the applicable ratings for its installation conditions.
The terminal strip uses through-hole PCB solder mounting with angled 1 × 1.2 mm solder pins. Integrated fixing flanges support flush panel installation, while CAGE CLAMP® spring terminals secure conductors using an operating tool. The recommended conductor strip length is 8–9 mm.
WAGO PCB terminal blocks provide dependable conductor-to-board connections for industrial automation, control equipment and OEM electronic assemblies. The WAGO 231-611/023-000 combines eleven-pole CAGE CLAMP® conductor termination, angled through-hole solder pins and integrated fixing flanges to support efficient wiring, flush panel mounting and reliable industrial electronic equipment assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.