Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.71
The WAGO 231-611/017-000 is a high-quality 11-pole through-panel PCB terminal block with CAGE CLAMP® spring pressure terminals, angled solder pins and integrated mounting flanges, designed for secure and reliable electrical connections in industrial automation, control electronics and printed circuit board assemblies. As part of the established WAGO 231 Series MCS MIDI Classic range, it combines proven conductor termination technology with a mechanically supported PCB mounting arrangement suitable for industrial electrical equipment.
Featuring WAGO's renowned CAGE CLAMP® spring pressure connection technology, this terminal block provides dependable electrical contact without conventional screw terminals. The spring clamping mechanism supports solid and fine-stranded conductors while maintaining consistent contact pressure. Its angled through-hole solder pins provide permanent electrical connections to the printed circuit board, while the integrated fixing flanges support secure installation through suitable panel openings and equipment housings.
With an 11-pole configuration, 5 mm pin spacing and an IEC rated current of 16 A, the WAGO 231-611/017-000 is suitable for industrial control, signal distribution and electrical equipment interconnection applications. The terminal block supports conductors from 0.08–2.5 mm² and provides a rated voltage of 320 V under IEC overvoltage category III, pollution degree 3 conditions. Its durable grey polyamide housing, integrated mounting flanges and compact construction make it a practical choice for PCB designers, control panel builders and OEM equipment manufacturers.
PCB terminal blocks such as the WAGO 231-611/017-000 provide an efficient method of connecting external electrical conductors directly to printed circuit boards in industrial automation systems, electrical control panels and machinery. The 11-pole arrangement enables eleven individual conductors to be terminated within a single terminal strip, helping organise wiring and simplify circuit integration. The angled solder pins provide permanent electrical connections to the PCB, while the CAGE CLAMP® terminals allow external conductors to be connected and disconnected using an appropriate operating tool.
A distinguishing feature of this model is its integrated through-panel mounting flange arrangement. The fixing flanges provide mechanical support when the terminal block is installed through a suitable panel opening, helping reduce mechanical forces acting directly on the PCB solder connections. The mounting arrangement is designed for housing sheet thicknesses up to 1.5 mm, making it particularly suitable for electrical enclosures, equipment interfaces and industrial control assemblies requiring accessible conductor termination.
The WAGO 231 Series MCS MIDI Classic incorporates proven spring pressure termination technology to provide reliable conductor connections without conventional screw tightening. The WAGO 231-611/017-000 combines direct PCB solder termination with CAGE CLAMP® conductor connections, eliminating the need for a separate mating plug. Its robust polyamide housing and tin-plated copper contacts support dependable operation in industrial electrical equipment. The terminal block must be installed within its electrical ratings, and all wiring or maintenance work must be carried out with the relevant circuits safely isolated.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 11 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series / MCS MIDI Classic | |
| Model | 231-611/017-000 | |
| Product type | Through-panel PCB terminal block | |
| Connector configuration | PCB terminal strip with angled solder pins | |
| Number of connection points | 11 | |
| Number of electrical potentials | 11 | |
| Number of connection types | 1 | |
| Number of connection levels | 1 | |
| Conductors per connection | 1 | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation type | Operating tool | |
| Actuation arrangement | Vertical and horizontal CAGE CLAMP® actuation | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Conductor stripping length | 8–9 mm | |
| PCB contact technology | Through-hole technology (THT) | |
| PCB termination method | Solder connection | |
| Solder pin configuration | Angled | |
| Solder pin arrangement | In-line across the terminal strip | |
| Solder pins per potential | 1 | |
| Total number of solder pins | 11 | |
| Solder pin length | 4.7 mm | |
| PCB drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Mounting type | Mounting flange | |
| Secondary mounting type | Feed-through mounting / panel mounting | |
| Mounting arrangement | Integrated fixing flanges | |
| Maximum housing sheet thickness | 1.5 mm | |
| Insulating material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Contact material | Electrolytic copper (E-Cu) | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Width | 70.2 mm | |
| Height | 19 mm | |
| Height above PCB surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Dimensions (W × H × D) | 70.2 × 19 × 19.1 mm | |
| Weight | Approx. 15.29 g | |
| Fire load | 0.254 MJ | |
| Temperature limit range | -60 to +105 °C | |
| Connector arrangement | Single-row, 11-position | |
| Connection format | Direct conductor-to-PCB connection | |
| Relevant standards | IEC/EN 61984, IEC/EN 60664-1, UL 1059 and UL 1977 | |
| RoHS compliance | Compliant | |
| Packaging type | Box | |
| Standard packaging quantity | 25 pieces | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918258241 | |
| Product group | WAGO Multi Connection System | |
| Application | Industrial PCB connections, control panels, feed-through wiring and electronic equipment assemblies |
The WAGO 231-611/017-000 is an 11-pole through-panel PCB terminal block designed to connect external electrical conductors directly to printed circuit boards. It features CAGE CLAMP® spring pressure terminals, angled through-hole solder pins and integrated mounting flanges, making it suitable for industrial automation, control electronics, machinery and equipment enclosures.
The connector uses through-hole technology (THT) with eleven angled solder pins that are inserted into appropriate PCB holes and soldered to establish permanent electrical connections. Its integrated fixing flanges also support installation through a suitable panel opening. The specified mounting arrangement accommodates housing sheet thicknesses up to 1.5 mm, while the solder pins have a length of 4.7 mm.
The terminal block supports solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–14 AWG. Fine-stranded conductors fitted with insulated ferrules are supported from 0.25–1.5 mm², while those fitted with uninsulated ferrules are supported from 0.25–2.5 mm². The recommended conductor stripping length is 8–9 mm.
The terminal block has an IEC rated current of 16 A and a rated voltage of 320 V under overvoltage category III, pollution degree 3 conditions. Under overvoltage category II, pollution degree 2 conditions, the rated voltage is 630 V. Its rated impulse voltage is 4 kV. The applicable electrical ratings depend on the PCB design, installation conditions and complete electrical assembly.
CAGE CLAMP® spring pressure technology provides reliable conductor termination without conventional screw tightening, helping maintain consistent electrical contact and simplifying wiring. The integrated mounting flanges provide additional mechanical support for through-panel installation, helping reduce stress on PCB solder connections. Together, these features make the WAGO 231-611/017-000 suitable for dependable conductor-to-PCB connections in industrial electrical equipment.
WAGO 231 Series PCB terminal blocks provide dependable electrical connection solutions for industrial automation, control panel construction and electronic equipment manufacturing. The WAGO 231-611/017-000 combines an 11-pole terminal strip design, CAGE CLAMP® spring pressure technology, 5 mm pin spacing, angled solder pins and integrated mounting flanges to support reliable PCB-to-wire connectivity, efficient installation and mechanically secure electrical connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.