Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.60
The WAGO 231-610 is a compact and reliable 10-pole pluggable male connector designed for secure electrical connections in industrial control panels, automation equipment and modular electrical assemblies. As part of the WAGO MCS MIDI Classic 231 Series, it provides a practical connection solution for machine builders, panel manufacturers and industrial automation engineers requiring dependable detachable wiring interfaces.
Featuring CAGE CLAMP® spring pressure connection technology, the WAGO 231-610 enables secure conductor termination without conventional screw terminals. Its spring-loaded clamping system helps maintain consistent contact pressure and reduces the maintenance associated with screw connections. The connector's 5 mm pin spacing allows multiple electrical circuits to be accommodated within a compact connection arrangement.
With 10 poles, a nominal conductor cross-section of 2.5 mm² and a durable grey insulating housing, the WAGO 231-610 is suitable for industrial electrical installations requiring organised, serviceable and reliable connections. Its pluggable construction allows compatible connector assemblies to be separated for equipment servicing, replacement and modular installation.
Pluggable connector systems such as the WAGO MCS MIDI Classic range provide a practical solution for connecting electrical circuits between control panels, machinery modules and industrial equipment. By incorporating multiple connection points into a detachable interface, these connectors simplify equipment assembly, wiring organisation and maintenance while supporting modular machine construction.
The WAGO 231-610 uses CAGE CLAMP® technology to provide secure electrical contact between conductors and connector terminals. Its ten-pole configuration is particularly useful where multiple control, signal or electrical supply connections need to be grouped into one compatible pluggable interface. The connector must be used with appropriately rated mating components and must not be connected or disconnected while energised or under load unless the complete assembly is specifically approved for that operation.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 10 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Model | 231-610 | |
| Manufacturer part number | 231-610 | |
| Product type | Pluggable male connector | |
| Connector configuration | 10-pole | |
| Number of conductor connections per pole | 1 | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Spring pressure connection | |
| Conductor actuation | Operating tool | |
| Pin spacing | 5 mm | |
| Nominal conductor cross-section | 2.5 mm² | |
| Connector system | Pluggable | |
| Calculated pole spacing length | 45 mm | |
| Overall connector length (L) | 53.2 mm | |
| Product category | Pluggable Connection Systems |
The WAGO 231-610 is a 10-pole pluggable male connector designed for detachable electrical connections in industrial control panels, automation equipment and modular electrical assemblies.
The connector features 10 poles, providing ten individual electrical connection positions with a 5 mm pin spacing.
The WAGO 231-610 has a nominal conductor cross-section of 2.5 mm². The permitted conductor size and preparation requirements should be observed when selecting and terminating wiring.
The connector uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors using a spring-loaded clamping mechanism rather than conventional screw terminals. An appropriate operating tool is used for conductor insertion and removal.
Yes. The WAGO 231-610 is part of the MCS MIDI Classic pluggable connector system and is suitable for compatible industrial automation, machine-building and control panel applications. The mating connector and complete electrical assembly must be selected according to the applicable electrical ratings and installation requirements.
WAGO MCS MIDI Classic pluggable connectors provide automation engineers, electrical panel builders and OEM machine manufacturers with dependable solutions for modular wiring and electrical interconnections. The WAGO 231-610 combines ten connection poles, compact 5 mm spacing and proven CAGE CLAMP® technology to support secure and serviceable industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.