Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.60
The WAGO 231-610/018-000 is a high-quality 10-pole male pluggable connector from the WAGO MCS MIDI Classic 231 series. Designed for industrial automation, control panels and modular electrical equipment, this connector features CAGE CLAMP® spring pressure connection technology, a 5 mm contact pitch and integrated snap-in mounting feet for secure DIN-35 rail and panel mounting.
Providing ten independent electrical connection positions, the WAGO 231-610/018-000 supports organised multi-circuit wiring within a compact connector assembly. Its screwless spring clamp terminals accommodate solid and fine-stranded conductors from 0.08–2.5 mm², helping simplify cable preparation, equipment wiring and maintenance without the need for conventional terminal screws.
With a 12 A IEC rated current, voltage ratings of 320 V or 630 V depending on the applicable IEC overvoltage and pollution conditions, and a durable grey PA66 housing, this connector is well suited to demanding industrial applications. The integrated snap-in mounting feet distinguish the /018-000 variant from the standard 231-610 connector, providing additional mechanical support for suitable rail-mounted and panel-mounted installations.
Technical note: Electrical ratings depend on the applicable certification, overvoltage category, pollution degree and mating arrangement. The specified temperature limit range describes the connector material limits and should not be interpreted as a guarantee of full rated-current operation at every temperature.
The WAGO 231-610/018-000 is designed for electrical installations requiring both reliable conductor termination and secure mechanical positioning. Its integrated snap-in mounting feet provide a convenient mounting solution for suitable DIN-35 rail and panel arrangements, helping maintain the connector's position during wiring, equipment assembly and servicing.
This mounting arrangement distinguishes the /018-000 variant from the standard WAGO 231-610 connector without snap-in mounting feet. It is particularly useful in control cabinets, industrial machinery and modular electrical assemblies where connectors need to be mechanically supported and readily accessible.
The connector's 10-pole configuration allows multiple control, power or signal circuits to be organised through one pluggable interface. Its 180° conductor entry direction supports in-line cable routing, while the 5 mm contact pitch provides a compact connection arrangement.
The WAGO 231-610/018-000 uses CAGE CLAMP® spring pressure technology to secure electrical conductors without conventional terminal screws. The spring mechanism applies consistent pressure to the conductor, helping maintain dependable electrical contact under normal industrial vibration and temperature variation.
The connector accommodates solid and fine-stranded conductors from 0.08–2.5 mm², providing flexibility for a range of industrial wiring requirements. The spring clamps are operated using an appropriate tool, allowing conductors to be inserted and removed during equipment manufacture, installation or maintenance.
As part of the WAGO MCS MIDI Classic system, the connector can be used with appropriately configured female mating connectors for modular wire-to-wire and board-to-wire connections. The mating component must match the ten-pole arrangement, 5 mm pitch, mechanical coding and applicable electrical ratings.
The WAGO MCS connector system does not provide load-breaking capability. The 231-610/018-000 must not be connected or disconnected while live or under load. Circuits must be safely isolated before mating or unmating, and accessible male contacts must not remain energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 10 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-610/018-000 | |
| Series | MCS MIDI Classic 231 | |
| Product type | 1-conductor male pluggable connector | |
| Connector gender | Male | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Number of potentials | 10 | |
| Number of connection points | 10 | |
| Connections per pole | 1 | |
| Number of levels | 1 | |
| Contact arrangement | Single row | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, overvoltage category III) | 320 V | |
| Rated voltage (IEC, category II, pollution degree 2) | 630 V | |
| Rated surge voltage (IEC) | 4 kV under applicable rating conditions | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V under applicable approval conditions | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Conductor size | 28–12 AWG | |
| Wire stripping length | 8–9 mm | |
| Connection actuation | Operating tool | |
| Conductor entry direction | 180° relative to mating direction | |
| Mounting type | DIN-35 rail / panel mounting | |
| Mounting mechanism | Integrated snap-in mounting feet | |
| Connector interface | Pluggable male contacts | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Material temperature limit range | −60 to +100 °C | |
| Width | 53.2 mm | |
| Height | 18.8 mm | |
| Depth | 27.5 mm | |
| Dimensions (W × H × D) | 53.2 × 18.8 × 27.5 mm | |
| Weight | Approximately 15.44 g | |
| Packaging unit | 50 pieces | |
| Connector system | WAGO Multi Connection System (MCS) | |
| Applicable connector standard | IEC 61984 |
The WAGO 231-610/018-000 is a 10-pole male pluggable connector used in industrial automation, electrical control panels and modular wiring systems. It features CAGE CLAMP® spring connections and integrated snap-in mounting feet for suitable DIN-35 rail and panel installations.
The connector has 10 poles, providing ten independent electrical potentials with one conductor connection per pole. Its contacts are arranged in a single row with a 5 mm pitch.
The connector has an IEC rated current of 12 A and a UL rated current of 15 A under applicable approval conditions. The permissible current depends on the certification, mating component, conductor size and installation conditions.
The WAGO 231-610/018-000 accepts solid and fine-stranded conductors from 0.08–2.5 mm², corresponding to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm².
The connector features integrated snap-in mounting feet designed for suitable DIN-35 rail and panel mounting arrangements. These mounting features provide additional mechanical support during installation and operation.
CAGE CLAMP® is WAGO's spring pressure conductor connection technology. It secures conductors without conventional terminal screws, maintaining consistent contact pressure and supporting reliable electrical connections in industrial environments.
The recommended conductor stripping length is 8–9 mm. Conductors should be prepared according to WAGO's installation instructions and inserted using the appropriate operating tool.
The connector measures approximately 53.2 mm wide, 18.8 mm high and 27.5 mm deep. The dimensions should be checked against the manufacturer's drawing when planning panel clearances or mounting arrangements.
Both products are 10-pole male connectors from the WAGO MCS MIDI Classic 231 series, featuring a 5 mm pitch and CAGE CLAMP® conductor termination. The 231-610/018-000 additionally includes integrated snap-in mounting feet for suitable DIN-35 rail and panel mounting.
The connector is intended for use with compatible 10-pole WAGO MCS MIDI Classic female mating connectors having a 5 mm contact pitch. The mating component must also match the connector's mechanical arrangement, coding and applicable electrical ratings.
No. WAGO MCS MIDI Classic connectors are not intended for load-breaking operation. The connector must not be connected or disconnected while live or under load. Electrical circuits must be safely isolated before mating or unmating.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical connections for industrial automation, machine building and control equipment. The WAGO 231-610/018-000 combines proven CAGE CLAMP® spring pressure technology, a ten-pole connection arrangement and integrated snap-in mounting feet to support secure wiring, efficient installation and serviceable industrial electrical systems.
Manufacturer reference: WAGO 231-610/018-000 Product Information.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.