Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.42
The WAGO 231-610/017-000 is a 10-pole PCB terminal block designed for reliable electrical connections between conductors and electronic equipment. Part of the established WAGO 231 series, this terminal block features a 5 mm contact pitch, CAGE CLAMP® spring pressure connection technology and a clamping collar for secure mechanical installation.
Designed for industrial control equipment and electronic assemblies, the WAGO 231-610/017-000 combines spring clamp conductor termination with an angled solder-pin configuration. Its ten connection positions allow multiple electrical circuits to be connected within a single terminal strip, while the 2.5 mm² maximum conductor capacity accommodates a practical range of wiring requirements.
The grey polyamide housing, 5 mm terminal spacing and integrated fixing flanges make this WAGO PCB terminal block suitable for control panels, machinery interfaces and industrial electronics. Unlike the standard pluggable male connectors in the 231 series, the 231-610/017-000 is a through-panel PCB terminal block with solder connections and mechanical fixing features, making it particularly useful where a permanent PCB connection and accessible field wiring are required.
Electrical rating note: Published distributor specifications for this part are not fully consistent regarding current and voltage ratings. The applicable ratings should therefore be taken from the manufacturer's technical documentation for the intended installation and approval standard.
The WAGO 231-610/017-000 is designed for applications where conductors must be connected to a printed circuit board through a mechanically supported terminal assembly. Its angled solder pins provide the electrical interface to the PCB, while the integrated fixing flanges and clamping collar help secure the terminal block within a suitable panel or housing arrangement.
This construction is particularly useful for industrial control electronics, where repeated conductor handling could otherwise place unwanted mechanical stress on PCB solder joints. By providing dedicated mechanical fixing features, the terminal block supports a robust installation when mounted according to WAGO's instructions.
The ten-pole configuration allows multiple control, power distribution or signal connections to be organised in a single terminal strip. Its 5 mm pitch supports efficient terminal spacing while maintaining accessibility for conductor installation and maintenance.
The WAGO 231-610/017-000 uses CAGE CLAMP® technology to secure electrical conductors through a spring pressure mechanism. Rather than relying on conventional terminal screws, the spring applies mechanical force to maintain electrical contact between the conductor and the current-carrying terminal components.
This connection method helps maintain consistent contact pressure and avoids the need for routine screw terminal retightening. It is well suited to industrial electrical installations where reliable conductor retention and straightforward maintenance are important.
The terminal block supports conductor cross-sections up to 2.5 mm², providing flexibility for control wiring and electronic equipment connections. Conductors should be prepared and inserted using the appropriate WAGO operating procedure, and the PCB layout must accommodate the specified solder-pin dimensions and mounting arrangement.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 10 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-610/017-000 | |
| Series | WAGO 231 Series | |
| Product type | PCB terminal block / through-panel terminal strip | |
| Number of contacts | 10 | |
| Number of rows | 1 | |
| Terminal pitch | 5 mm | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Maximum conductor cross-section | 2.5 mm² | |
| Minimum conductor cross-section | 0.08 mm² | |
| Conductor size range | 28–14 AWG | |
| Mounting type | Through-hole PCB mounting | |
| Mounting arrangement | Through-panel with fixing flanges | |
| Mechanical fixing | Clamping collar | |
| PCB termination | Solder pins | |
| Solder-pin orientation | Angled | |
| Solder-pin dimensions | 1 × 1.2 mm | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Width | 65.2 mm | |
| Depth | 19.1 mm | |
| Maximum housing sheet thickness | 1.5 mm | |
| Packaging unit | 25 pieces | |
| RoHS compliance | Compliant | |
| Country of origin | Germany |
The WAGO 231-610/017-000 is a 10-pole PCB terminal block used to connect electrical conductors to printed circuit boards in industrial automation, electronic control equipment and through-panel wiring assemblies.
The terminal block has 10 poles, providing ten electrical connection positions arranged in a single row with a 5 mm pitch.
No. The 231-610/017-000 is specifically identified by WAGO as a PCB terminal block featuring CAGE CLAMP® connections, a clamping collar and PCB solder pins. It should not be confused with the standard WAGO 231-610 male pluggable connector.
The terminal block supports conductors from 0.08–2.5 mm². The exact permissible conductor type and ferrule arrangement should be checked against the manufacturer's installation specifications.
The terminal block has a 5 mm contact pitch, providing consistent spacing between its ten connection positions.
The connector uses through-hole PCB solder pins together with fixing flanges and a clamping collar. This arrangement supports mechanically secured PCB and through-panel installation.
CAGE CLAMP® is WAGO's spring pressure conductor termination technology. It secures conductors without conventional terminal screws and maintains contact pressure through a mechanical spring mechanism.
The WAGO 231-610/017-000 uses angled solder pins measuring 1 × 1.2 mm. The PCB footprint and mounting arrangement should follow the manufacturer's dimensional drawing.
The terminal block has a grey polyamide 66 (PA66) housing with a UL94 V-0 flammability classification.
The standard WAGO 231-610 is a 10-pole male pluggable connector, whereas the 231-610/017-000 is a 10-pole PCB terminal block with angled solder pins, fixing flanges and a clamping collar for through-panel mounting.
WAGO connection technology is widely specified in industrial automation, electrical engineering and electronic equipment manufacturing. The WAGO 231-610/017-000 combines ten CAGE CLAMP® conductor connections with a mechanically supported PCB mounting arrangement, providing a practical solution for reliable, organised and serviceable electrical interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.