Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.11
The WAGO 231-609/017-000 is a 9-pole PCB terminal block with CAGE CLAMP® spring pressure connection technology, designed for secure conductor termination in industrial automation, electronic control equipment and printed circuit board assemblies. Part of the established WAGO 231 Series, this terminal block combines screwless wiring connections with through-hole PCB mounting and an integrated mounting flange.
Featuring a 5 mm contact pitch, a nominal conductor capacity of 2.5 mm² and nine independent connection positions, the WAGO 231-609/017-000 provides a practical solution for multi-circuit PCB wiring. Its CAGE CLAMP® terminals accommodate solid and fine-stranded copper conductors from 0.08–2.5 mm², enabling dependable connections without conventional terminal screws.
With a 16 A current rating, 320 V rated voltage and a durable grey polyamide PA66 housing, this terminal block is suitable for industrial control circuits, power supply interfaces and electronic assemblies. The /017-000 configuration incorporates a mounting flange and clamping collar for secure PCB, panel and feed-through installation.
The WAGO 231-609/017-000 provides a dependable connection between external copper conductors and printed circuit boards. Its CAGE CLAMP® spring pressure technology maintains contact force on connected conductors, helping reduce maintenance associated with conventional screw terminal connections.
The terminal block combines direct conductor termination and through-hole solder contacts in one component. Nine individual clamping units allow multiple circuits to connect to a PCB, while the in-line solder pin arrangement supports straightforward circuit board design and assembly.
The integrated mounting flange and clamping collar provide mechanical support for suitable panel and feed-through installations. These features make the terminal block useful where wiring connections must remain accessible at the equipment enclosure while maintaining a secure connection to the PCB.
The grey PA66 insulating housing, tin-plated copper contacts and chrome-nickel spring steel clamping elements provide a durable industrial connection system. For reliable performance, installers should follow WAGO's requirements for conductor preparation, soldering, PCB hole dimensions and mechanical mounting. The finished equipment must operate within the applicable electrical ratings and environmental limits.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 9 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series | |
| Manufacturer part number | 231-609/017-000 | |
| Product type | PCB terminal block with mounting flange and clamping collar | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Number of clamping units | 9 | |
| Number of potentials | 9 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Number of rows | 1 | |
| Contact pitch | 5 mm | |
| Rated current | 16 A | |
| Nominal conductor cross-section | 2.5 mm² | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Conductor strip length | 8–9 mm | |
| Actuation type | Operating tool | |
| Conductor connection direction to PCB | 0° | |
| Mounting type | Mounting flange, panel mounting and feed-through mounting | |
| PCB contact technology | Through-hole technology (THT) | |
| Solder pin arrangement | In-line across the terminal strip | |
| Number of solder pins per potential | 1 | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| Solder pin length | 4.7 mm | |
| Drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Maximum PCB thickness | 1.5 mm | |
| Width | 60.2 mm | |
| Height | 19 mm | |
| Height above PCB surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Weight | 12.7 g | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulation material | Polyamide PA66 | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Fire load | 0.323 MJ | |
| Compliance | RoHS compliant | |
| Applicable standards and approvals | IEC/EN 60664-1, UL 1059 and CSA | |
| Country of origin | Germany |
The WAGO 231-609/017-000 is a 9-pole PCB terminal block designed to connect copper conductors directly to printed circuit boards using CAGE CLAMP® spring pressure technology. It is suitable for industrial control equipment, PCB assemblies and panel-mounted electronic systems.
The /017-000 configuration features a mounting flange and clamping collar, supporting secure installation in suitable PCB, panel and feed-through arrangements. Unlike the standard 231-609 male pluggable connector, this variant uses soldered through-hole PCB contacts.
The terminal block accepts solid and fine-stranded copper conductors from 0.08–2.5 mm², corresponding to 28–14 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm².
The WAGO 231-609/017-000 has a 16 A current rating and a 320 V rated voltage. The permissible operating limits of the finished assembly depend on the applicable approval, conductor size, PCB design and installation conditions.
The terminal block uses through-hole solder mounting with 0.8 × 1.3 mm solder pins and a 4.7 mm pin length. Its mounting flange and clamping collar support suitable panel installations, while CAGE CLAMP® spring terminals secure conductors using an operating tool. The recommended conductor strip length is 8–9 mm.
WAGO PCB terminal blocks provide dependable electrical connections for industrial automation, control equipment and OEM electronic assemblies. The WAGO 231-609/017-000 combines nine-pole CAGE CLAMP® conductor termination, through-hole PCB mounting and an integrated mounting flange with clamping collar to support efficient wiring and reliable equipment assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.