Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.81
The WAGO 231-608/023-000 is an 8-pole feed-through PCB terminal block designed to provide reliable connections between external electrical wiring and printed circuit boards. Part of WAGO's established 231 Series, this terminal block features CAGE CLAMP® spring pressure connection technology, a clamping collar and integrated fixing flanges for secure installation.
With a 5 mm pin spacing, a conductor connection range of 0.08–2.5 mm² and an IEC rated current of 16 A, the WAGO 231-608/023-000 provides eight independent conductor connection positions. Its angled contact pins support through-hole PCB installation, while its fixing flanges allow mechanically supported PCB or front-panel mounting.
The grey polyamide housing and screwdriver-actuated spring terminals make this component particularly suitable for industrial automation, electronic control systems, machinery and OEM equipment. Its feed-through construction provides a practical electrical interface for equipment requiring organised external wiring connections to internal PCB assemblies.
The WAGO 231-608/023-000 provides a practical connection interface between external electrical conductors and PCB-mounted electronic circuits. Its CAGE CLAMP® spring pressure terminals secure conductors without conventional terminal screws, while the angled contact pins establish permanent soldered connections to the printed circuit board.
The eight-pole arrangement and integrated fixing flanges make this terminal block particularly useful in industrial equipment where multiple electrical connections must pass through an enclosure or connect to internal electronics. Its design supports organised wiring in automation controllers, industrial instrumentation, machinery control modules and OEM electronic assemblies.
The feed-through construction allows the terminal block to be mounted either flush with the enclosure or protruding from the panel, subject to the appropriate mechanical design. This provides flexibility when integrating the component into electrical cabinets, electronic housings and control equipment.
For dependable operation, the PCB footprint, solder joints, conductor preparation, panel dimensions and electrical loading must comply with WAGO's installation requirements. The WAGO 231-608/023-000 is a fixed PCB terminal block rather than a detachable male pluggable connector.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 8 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 | |
| Model | 231-608/023-000 | |
| Manufacturer part number | 231-608/023-000 | |
| Manufacturer reference | 51112687 | |
| Product type | Feed-through PCB terminal block | |
| Connection arrangement | Wire-to-board | |
| Number of connection points | 8 | |
| Number of potentials | 8 | |
| Number of levels | 1 | |
| Pin spacing | 5 mm | |
| Connection technology | CAGE CLAMP® | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Conductor size | 28–14 AWG | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL, Use Group B) | 15 A | |
| Rated voltage (UL, Use Group B) | 300 V | |
| Rated current (UL, Use Group C) | 15 A | |
| Rated voltage (UL, Use Group C) | 150 V | |
| Rated current (UL, Use Group D) | 10 A | |
| Rated voltage (UL, Use Group D) | 300 V | |
| PCB connection technology | Through-hole soldering | |
| Contact pin orientation | Angled | |
| Contact pin dimensions | 1 × 1.2 mm | |
| Mounting arrangement | PCB or front-panel mounting | |
| Mounting configuration | Flush or protruding installation | |
| Panel thickness | Up to 1.5 mm for the specified mounting arrangement | |
| Conductor entry orientation | Horizontal relative to PCB | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Width | 55.2 mm | |
| Height | 19 mm | |
| Depth | 19.1 mm | |
| Weight | Approximately 11.4 g | |
| Standards | IEC/EN 60664-1, UL 1059 | |
| Environmental compliance | RoHS | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918279345 |
The WAGO 231-608/023-000 is an eight-pole feed-through PCB terminal block used to connect external electrical wiring to printed circuit boards. It features CAGE CLAMP® spring pressure terminals, angled contact pins and fixing flanges for PCB or front-panel mounting.
The terminal block has eight poles, providing eight independent conductor connection positions on a single level. The pin spacing is 5 mm.
The terminal block supports suitable solid and fine-stranded conductors with cross-sections from 0.08–2.5 mm², corresponding to 28–14 AWG. Fine-stranded conductors fitted with insulated ferrules are supported from 0.25–1.5 mm².
The terminal block has an IEC rated current of 16 A. Its IEC rated voltage is 320 V under overvoltage category III, pollution degree 3, and 630 V under overvoltage category II, pollution degree 2. The rated impulse voltage is 4 kV. UL ratings vary by use group.
The WAGO 231-608/023-000 uses angled 1 × 1.2 mm contact pins for through-hole PCB soldering and incorporates fixing flanges for mechanically supported PCB or front-panel mounting. The design supports flush or protruding installation in compatible equipment enclosures.
WAGO PCB terminal blocks provide dependable electrical connections for industrial electronics, machinery and automation equipment. The WAGO 231-608/023-000 combines eight-pole CAGE CLAMP® termination, a 5 mm pin spacing, angled PCB contact pins and integrated fixing flanges to support secure and accessible wire-to-board connections in industrial electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.