Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.83
The WAGO 231-608/018-000 is an 8-pole, 1-conductor male pluggable connector from the WAGO MCS MIDI Classic 231 series, designed for secure electrical connections in industrial automation, control panels and electronic equipment. Featuring CAGE CLAMP® spring pressure connection technology, a 5 mm contact pitch and integrated snap-in mounting feet, this connector provides a dependable solution for DIN-35 rail and panel-mounted wiring assemblies.
Unlike conventional screw terminal connectors, the WAGO 231-608/018-000 uses WAGO's proven CAGE CLAMP® conductor termination system to maintain consistent electrical contact pressure. The connector accepts solid and fine-stranded conductors from 0.08–2.5 mm², enabling flexible integration into industrial control circuits, machine wiring and modular electrical installations.
With eight independent electrical connection positions, a 12 A IEC rated current and a 630 V IEC voltage rating under the applicable installation conditions, the WAGO 231-608/018-000 combines compact construction with reliable electrical performance. Its grey PA66 housing, tin-plated contacts and snap-in mounting arrangement make it particularly suitable for industrial equipment requiring secure, serviceable connections.
The WAGO 231-608/018-000 is designed to provide reliable electrical connections in industrial automation and control equipment. Its CAGE CLAMP® spring pressure technology secures conductors using a mechanical spring mechanism rather than conventional terminal screws. This helps maintain consistent contact pressure and reduces the risk of connections loosening due to normal vibration or thermal cycling.
A distinguishing feature of the /018-000 variant is its integrated snap-in mounting feet, which support installation in suitable DIN-35 rail and panel-mounted arrangements. This provides additional mechanical support for the connector and makes it particularly useful in electrical cabinets, modular control assemblies and industrial equipment where organised, accessible wiring is required.
The connector's eight-pole arrangement enables multiple electrical circuits to be connected through a single pluggable interface. Its 5 mm pitch provides a compact connection layout, while the 180° conductor entry arrangement supports straightforward cable routing. When paired with a compatible female connector, the WAGO 231-608/018-000 supports efficient cable pre-assembly and equipment maintenance.
The WAGO MCS MIDI Classic system is intended for electrical connections without load-breaking capability. The 231-608/018-000 must not be connected or disconnected while live or under load. Electrical circuits must be safely isolated before mating or unmating, and the circuit design should prevent accessible male contact pins from remaining energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 8 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Model | 231-608/018-000 | |
| Product type | 1-conductor male pluggable connector | |
| Connector gender | Male | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Number of potentials | 8 | |
| Number of connection points | 8 | |
| Connections per pole | 1 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Contact arrangement | Single row | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, overvoltage category III) | 320 V | |
| Rated voltage (IEC, category II, pollution degree 2) | 630 V | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Conductor cross-section, solid | 0.08–2.5 mm² | |
| Conductor cross-section, fine-stranded | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Wire stripping length | 8–9 mm | |
| Connection actuation | Operating tool | |
| Conductor entry direction | 180° relative to mating direction | |
| Mounting type | DIN-35 rail / panel mounting | |
| Mounting mechanism | Integrated snap-in mounting feet | |
| Connector interface | Pluggable male contacts | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Nominal connector width | 43.2 mm | |
| Insulation height | 14.3 mm | |
| Connector depth, standard 231-608 body | 27.5 mm | |
| Variable coding | Yes | |
| Packaging quantity | 50 pieces | |
| Connector system | WAGO Multi Connection System (MCS) | |
| Applicable connector standard | IEC 61984 |
The WAGO 231-608/018-000 is an 8-pole male pluggable connector designed for industrial automation, electrical control panels and modular wiring systems. It features CAGE CLAMP® spring connection technology and snap-in mounting feet for suitable DIN-35 rail and panel installations.
The connector has 8 poles, providing eight independent electrical potentials with one conductor connection per pole. Its contacts are arranged in a single row with a 5 mm pitch.
The WAGO 231-608/018-000 has an IEC rated current of 12 A and a UL rated current of 15 A. The applicable current rating depends on the relevant certification, mating component, conductor size and installation conditions.
The connector accepts solid and fine-stranded conductors from 0.08–2.5 mm², corresponding to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm².
The connector features integrated snap-in mounting feet for suitable DIN-35 rail and panel mounting arrangements. These mounting features provide additional mechanical support and distinguish the /018-000 variant from the standard connector without snap-in mounting feet.
CAGE CLAMP® is WAGO's spring pressure connection technology. It secures electrical conductors without conventional terminal screws, maintaining consistent contact pressure and supporting reliable connections in industrial environments.
The recommended conductor stripping length is 8–9 mm. Conductors should be prepared according to WAGO's installation instructions before insertion into the spring clamp connection.
The WAGO 231-608/018-000 has a specified temperature limit range of −60 to +100 °C. The complete installation must remain within the applicable electrical and environmental operating limits.
No. WAGO MCS MIDI Classic connectors do not provide load-breaking capability. The connector must not be connected or disconnected while live or under load. The circuit must be safely isolated before mating or unmating, and exposed male contacts must not remain energised when disconnected.
The WAGO 231-608/018-000 is designed for use with compatible 8-pole WAGO MCS MIDI Classic female connectors featuring a 5 mm contact pitch. Suitable mating options within the connector system include compatible configurations from the WAGO 231, 232 and 731 series. The exact mating part must match the mechanical arrangement, coding and installation requirements.
Both products belong to the WAGO MCS MIDI Classic 231 series and feature eight poles, a 5 mm pitch and CAGE CLAMP® connection technology. The 231-608/018-000 variant additionally features snap-in mounting feet for DIN-35 rail and panel mounting.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical connections for industrial automation, machine building and control equipment. The WAGO 231-608/018-000 combines proven CAGE CLAMP® spring pressure technology, an 8-pole connection arrangement and integrated snap-in mounting feet to support secure wiring, efficient installation and reliable industrial electrical connectivity.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.