Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.42
The WAGO 231-606/114-000 is a 6-pole male pluggable connector with an integrated snap-in flange from WAGO's MCS MIDI Classic 231 Series. Designed for industrial electrical connections, it combines CAGE CLAMP® spring pressure termination with a mechanically supported mounting arrangement for panel and through-panel installations.
Featuring a 5 mm contact pitch, a conductor connection range of 0.08–2.5 mm² and an IEC rated current of 12 A, the connector provides six independent electrical connection positions. Its snap-in flange enables secure positioning in compatible enclosure panels, making it suitable for industrial automation equipment, control systems and machinery wiring.
The WAGO 231-606/114-000 features a grey polyamide housing, tin-plated copper contacts and tool-operated spring terminals. Its pluggable connection interface supports modular wiring, convenient cable pre-assembly and equipment servicing when used with an appropriately specified mating connector.
The WAGO 231-606/114-000 provides a practical electrical interface for industrial control systems, machinery and automation equipment. Its CAGE CLAMP® spring pressure terminals enable secure conductor termination, while the six-pole male connector interface supports detachable electrical connections using compatible mating components.
The integrated snap-in flange distinguishes this version from standard free-hanging connector configurations. It enables the connector to be mounted in a suitable enclosure panel, providing a defined connection point between electrical assemblies. The feed-through mounting arrangement is particularly useful where external wiring must interface with equipment housed inside a control enclosure.
WAGO's MCS MIDI Classic system supports cable pre-assembly and on-unit wiring through vertical and horizontal CAGE CLAMP® actuation. The connector can be incorporated into compatible wire-to-wire and board-to-wire assemblies, provided the complete installation meets the manufacturer's electrical and mechanical requirements.
As a connector without breaking capacity under IEC/EN 61984, the WAGO 231-606/114-000 must not be connected or disconnected while live or under load. Equipment designs should also prevent accessible male contacts from remaining energised when the connector is unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 6 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 / MCS MIDI Classic | |
| Model | 231-606/114-000 | |
| Manufacturer part number | 231-606/114-000 | |
| Product type | Male pluggable connector with snap-in flange | |
| Manufacturer description | 1-conductor male connector | |
| Connector gender | Male | |
| Number of connection points | 6 | |
| Number of potentials | 6 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure connection | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC) | 630 V | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Conductor entry direction | 0° relative to mating direction | |
| Mounting type | Snap-in / feed-through mounting | |
| Compatible housing sheet thickness | 0.5–2.5 mm | |
| Width | 51 mm | |
| Height | 17.5 mm | |
| Depth | 27.5 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Component temperature range | -60 to +100 °C | |
| Manufacturer packaging unit | 50 pieces | |
| Country of origin | Germany | |
| GTIN / EAN | 4050821216049 |
The WAGO 231-606/114-000 is a six-pole male pluggable connector designed for industrial electrical connections. It features CAGE CLAMP® spring pressure terminals and an integrated snap-in flange for compatible panel and through-panel installations.
The connector has six poles, providing six independent conductor connection points. Its contact pitch is 5 mm, and it belongs to WAGO's MCS MIDI Classic 231 Series.
The connector accepts solid and fine-stranded conductors from 0.08–2.5 mm² (28–12 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while those with uninsulated ferrules are supported from 0.25–2.5 mm². The specified stripping length is 8–9 mm.
The connector has an IEC rated current of 12 A and an IEC rated voltage of 630 V. Its UL ratings include 15 A and 600 V, subject to the applicable approval and installation conditions.
The connector incorporates a snap-in flange for mounting in compatible enclosure panels. WAGO specifies snap-in and feed-through mounting, with a compatible housing sheet thickness of 0.5–2.5 mm. The mounting arrangement provides mechanical support for the connector within an electrical assembly.
WAGO MCS MIDI Classic connectors provide dependable electrical connections for industrial automation, machinery and control equipment. The WAGO 231-606/114-000 combines six-pole CAGE CLAMP® termination, a 5 mm contact pitch and an integrated snap-in flange to support secure, accessible and serviceable panel-mounted electrical connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.