Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.03
The WAGO 231-606/019-000 is a 6-pole, 1-conductor male connector from the WAGO MCS MIDI Classic 231 Series. Designed for industrial pluggable electrical connections, it combines WAGO's proven CAGE CLAMP® spring-pressure termination technology with a 5 mm contact pitch, grey insulating housing and integrated mounting flanges.
Featuring six connection positions, the connector accommodates solid and fine-stranded conductors from 0.08 to 2.5 mm². Its spring-clamp connection system enables reliable conductor termination without conventional screw-tightening, while the male connector interface supports detachable connections with compatible WAGO MCS components.
With an IEC rated current of 12 A, an IEC voltage rating of up to 630 V under the applicable insulation coordination conditions, and a temperature range of −60 to +100 °C, the WAGO 231-606/019-000 is suitable for industrial automation, machinery control, instrumentation and modular electronic equipment.
The WAGO 231-606/019-000 uses CAGE CLAMP® technology to provide consistent conductor contact pressure through a spring-operated clamping mechanism. This eliminates the need for conventional screw-terminal tightening torque and supports repeatable wiring procedures during manufacturing, installation and maintenance.
The connector's six-pole arrangement allows multiple conductors to be terminated in a compact assembly. Its integrated mounting flanges provide a means of mechanically securing the connector, while the male mating interface supports detachable electrical connections with compatible WAGO 231 Series components.
WAGO's MCS MIDI Classic system supports cable pre-assembly and on-unit wiring, with vertical and horizontal spring-clamp actuation options. The connector is suitable for wire-to-wire and board-to-wire applications when paired with the correct mating components.
For safe installation, observe the specified conductor stripping length, electrical ratings, mating compatibility and mounting dimensions. WAGO states that MCS connectors without breaking capacity must not be connected or disconnected while live or under load. Equipment design must also prevent accessible male contacts from remaining energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 6 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-606/019-000 | |
| Product series | 231 | |
| Product family | MCS MIDI Classic | |
| Product type | 1-conductor male connector | |
| Connector interface | Male plug | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring-pressure clamp | |
| Number of connection positions | 6 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 5 mm | |
| Conductor entry orientation | 180° | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size range | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC) | 630 V, subject to applicable insulation coordination conditions | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Mounting configuration | Integrated mounting flanges | |
| Mounting arrangement | In-line connector with panel-mounting provision | |
| Contact material | Electrolytic copper | |
| Contact surface | Tin-plated | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | −60 to +100 °C | |
| Insulation height | 14.3 mm | |
| Nominal connector body length | 33.2 mm, calculated from WAGO's dimensional formula | |
| Standard packaging quantity | 50 pieces | |
| Country of origin | Germany |
The WAGO 231-606/019-000 is a six-pole, one-conductor male connector from the WAGO MCS MIDI Classic 231 Series, featuring CAGE CLAMP® spring-pressure termination, a 5 mm contact pitch and a clamping-collar configuration with mounting flanges.
The connector has 6 poles, providing six electrical connection positions arranged in a single row at a 5 mm pitch.
The connector supports conductor cross-sections from 0.08 to 2.5 mm², corresponding to 28–12 AWG. The specified stripping length is 8–9 mm.
The connector has an IEC rated current of 12 A and an IEC voltage rating of up to 630 V under applicable insulation coordination conditions. Listed UL ratings are 15 A and 600 V.
It uses WAGO CAGE CLAMP® spring-pressure technology, which secures properly prepared conductors without conventional screw-terminal tightening.
The 231-606/019-000 is the mounting-flange and clamping-collar configuration, while the 231-606/018-000 is identified as a version with snap-in mounting feet. The correct variant should be selected according to the equipment's mounting requirements.
No. WAGO specifies that MCS connectors without breaking capacity must not be mated or unmated while energised or under load. The equipment design must also protect against accidental contact with live male connector pins.
WAGO MCS MIDI Classic connectors combine dependable CAGE CLAMP® conductor termination with practical pluggable interfaces, helping industrial equipment manufacturers, panel builders and automation engineers create compact, serviceable electrical connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.