Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.92
The WAGO 231-606/018-000 is a 6-pole male pluggable connector with snap-in mounting feet from WAGO's MCS MIDI Classic 231 Series. Designed for industrial electrical connections, it combines CAGE CLAMP® spring pressure termination with a practical mounting arrangement for DIN-35 rails and compatible panel installations.
Featuring a 5 mm contact pitch, a conductor connection range of 0.08–2.5 mm² and an IEC rated current of 12 A, this connector provides six separate electrical connection positions. Its snap-in mounting feet enable the connector to be mechanically supported, making it particularly useful for organised electrical connections in control equipment, machinery and industrial enclosures.
The WAGO 231-606/018-000 also features a grey polyamide housing, tin-plated copper contacts and tool-actuated spring terminals. Its pluggable design supports convenient cable pre-assembly and equipment servicing when paired with an appropriate mating connector.
The WAGO 231-606/018-000 provides a practical connection interface for industrial control systems, machinery and automation equipment. Its CAGE CLAMP® spring pressure terminals enable secure conductor termination, while the six-pole male connector interface supports detachable electrical connections using compatible mating components.
The integrated snap-in mounting feet distinguish this version from the standard WAGO 231-606 connector. They enable mechanically supported installation on compatible DIN-35 rails or panels, helping maintain an organised wiring arrangement inside electrical enclosures and equipment assemblies.
Vertical and horizontal CAGE CLAMP® actuation supports convenient cable pre-assembly and on-unit wiring. The connector can be used in suitable wire-to-wire and board-to-wire assemblies, provided the mating component and complete installation meet WAGO's electrical and mechanical requirements.
As a connector without breaking capacity, the WAGO 231-606/018-000 must not be connected or disconnected while live or under load. Appropriate isolation and protection against accidental contact with energised male contacts must be incorporated into the equipment design.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 6 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 / MCS MIDI Classic | |
| Model | 231-606/018-000 | |
| Manufacturer part number | 231-606/018-000 | |
| Product type | Male pluggable connector with snap-in mounting feet | |
| Manufacturer description | 1-conductor male connector | |
| Connector gender | Male | |
| Number of connection points | 6 | |
| Number of potentials | 6 | |
| Conductors per connection point | 1 | |
| Contact pitch | 5 mm | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure connection | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Mounting type | DIN-35 rail / panel mounting | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | -60 to +100 °C | |
| Width | 33.2 mm | |
| Height | 14.3 mm | |
| Depth | 27.5 mm | |
| Weight | Approximately 9.4 g | |
| Manufacturer packaging unit | 50 pieces | |
| Country of origin | Germany | |
| RoHS compliance | Compliant | |
| GTIN / EAN | 4044918257411 |
The WAGO 231-606/018-000 is a six-pole male pluggable connector designed for industrial electrical connections. It features CAGE CLAMP® spring pressure terminals and snap-in mounting feet for compatible DIN-35 rail or panel installations.
The connector has six poles, providing six individual conductor connection points. Its contact pitch is 5 mm, and it belongs to WAGO's MCS MIDI Classic 231 Series.
The connector accepts suitable solid and fine-stranded conductors with cross-sections from 0.08–2.5 mm², corresponding to 28–12 AWG. The specified conductor stripping length is 8–9 mm.
The connector has an IEC rated current of 12 A and an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2. Its UL ratings include 15 A and 600 V, subject to the applicable approval and installation conditions.
Both are six-pole male connectors from the WAGO MCS MIDI Classic range, featuring CAGE CLAMP® terminals and a 5 mm contact pitch. The 231-606/018-000 variant additionally incorporates snap-in mounting feet for compatible DIN-35 rail or panel installations.
WAGO MCS MIDI Classic connectors provide dependable electrical connections for industrial automation, machinery and control equipment. The WAGO 231-606/018-000 combines six-pole CAGE CLAMP® termination, a 5 mm contact pitch and snap-in mounting feet to support secure, accessible and serviceable electrical connections in industrial installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.