Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.21
The WAGO 231-606/017-000 is a 6-pole through-panel PCB terminal block designed to provide reliable electrical connections between external wiring and printed circuit boards. Part of WAGO's established 231 Series, this terminal strip combines CAGE CLAMP® spring pressure termination with angled solder pins and integrated fixing flanges for industrial electronic equipment.
Featuring a 5 mm pin spacing, 0.08–2.5 mm² conductor capacity and 16 A IEC rated current, the WAGO 231-606/017-000 provides six independent connection positions. Its angled 1 × 1.2 mm solder pins enable through-hole PCB connections, while the fixing flanges support mechanically secure mounting in suitable equipment assemblies.
The grey polyamide housing, tool-actuated spring terminals and panel-mounting arrangement make this connector suitable for industrial automation, control electronics, machinery and OEM equipment. It offers an accessible conductor termination interface while allowing electrical connections to be integrated directly into a PCB-based design.
The WAGO 231-606/017-000 provides a practical electrical interface between external field wiring and PCB-mounted electronic circuits. Its CAGE CLAMP® spring pressure terminals secure conductors without conventional terminal screws, while the angled solder pins establish electrical connections directly to the printed circuit board.
Its six-pole arrangement and integrated fixing flanges make the terminal strip particularly useful in equipment where several conductors must enter through an enclosure or panel and connect to internal electronics. This configuration supports organised wiring in automation controllers, industrial instrumentation, machinery control modules and OEM electronic assemblies.
For reliable operation, the PCB footprint, solder joints, panel mounting, conductor preparation and electrical loading must comply with the applicable manufacturer requirements. The terminal block is a fixed wire-to-board connection component rather than a detachable pluggable connector.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 6 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 | |
| Model | 231-606/017-000 | |
| Manufacturer part number | 231-606/017-000 | |
| Manufacturer reference | 51110734 | |
| Product type | Through-panel PCB terminal block | |
| Connection arrangement | Wire-to-board | |
| Number of connection points | 6 | |
| Number of levels | 1 | |
| Pin spacing | 5 mm | |
| Conductor connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure connection | |
| Actuation method | Operating tool | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, II/2) | 4 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 300 V | |
| PCB connection technology | Through-hole soldering (THT) | |
| Solder pin orientation | Angled | |
| Solder pin dimensions | 1 × 1.2 mm | |
| Solder pin length | 4.7 mm | |
| Mounting arrangement | PCB / through-panel mounting | |
| Conductor entry | Horizontal relative to PCB | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Width | 45.2 mm | |
| Height | 19 mm | |
| Depth | 19.1 mm | |
| Weight | Approximately 8.84 g | |
| Referenced standards | IEC/EN 61984, UL 1977 | |
| Environmental compliance | RoHS | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918257404 |
The WAGO 231-606/017-000 is a six-pole through-panel PCB terminal block used to connect electrical conductors directly to printed circuit boards. It features CAGE CLAMP® spring pressure terminals, angled solder pins and fixing flanges for mechanically supported installation.
The terminal block has six poles, providing six independent conductor connection positions on a single level. The pin spacing is 5 mm.
The terminal block supports suitable conductors with cross-sections from 0.08–2.5 mm², corresponding to 28–14 AWG. Conductors should be prepared and terminated in accordance with WAGO's installation instructions.
The terminal block has an IEC rated current of 16 A and an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2. The rated impulse voltage under these conditions is 4 kV. Published UL ratings include 300 V and 15 A.
The WAGO 231-606/017-000 uses angled 1 × 1.2 mm solder pins for through-hole PCB soldering and incorporates fixing flanges for mechanically supported panel installation. The solder pin length is 4.7 mm.
WAGO PCB terminal blocks provide dependable electrical connections for industrial electronics, machinery and automation equipment. The WAGO 231-606/017-000 combines six-pole CAGE CLAMP® termination, angled PCB solder pins and integrated fixing flanges to support secure, accessible wire-to-board connections in industrial electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.