Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.90
The WAGO 231-605/023-000 is a robust 5-pole PCB terminal block with CAGE CLAMP® spring pressure connection technology, designed for dependable electrical connections in industrial automation, electronic control equipment and printed circuit board assemblies. Part of the WAGO 231 Series, this terminal block combines secure conductor termination with through-hole PCB mounting and an integrated clamping collar.
Featuring a 5 mm contact pitch and a nominal conductor capacity of 2.5 mm², the WAGO 231-605/023-000 accommodates solid and fine-stranded copper conductors. Its spring pressure connection system provides reliable conductor contact without conventional screw tightening, while its solder pins establish a secure electrical connection to the printed circuit board.
With a 16 A current rating, five independent connection positions and a durable grey polyamide PA66 housing, this terminal block is suitable for industrial control circuits, power supply interfaces and electronic equipment. Its mounting flange and clamping collar arrangement supports secure installation in PCB, panel and feed-through applications.
The WAGO 231-605/023-000 provides a dependable method of connecting external copper conductors directly to printed circuit boards. Its CAGE CLAMP® spring pressure system maintains contact force on the connected conductor, reducing the need for maintenance associated with conventional screw terminal connections.
The terminal block combines direct conductor termination and through-hole solder contacts in a single component. Five separate connection points allow multiple electrical circuits to be connected to the PCB, while the in-line solder pin arrangement supports straightforward integration into suitable circuit board layouts.
The integrated mounting flange and clamping collar provide additional mechanical support for panel and feed-through applications. This configuration is particularly useful where electrical connections must pass through equipment housings or where a terminal block requires secure positioning within an industrial assembly.
The grey polyamide housing provides electrical insulation, while the spring clamp connection system supports efficient conductor installation. For reliable performance, installers should follow the manufacturer's requirements for conductor preparation, PCB hole dimensions, soldering and mechanical mounting. The finished assembly must also remain within its applicable electrical ratings.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 5 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series | |
| Manufacturer part number | 231-605/023-000 | |
| Product type | PCB terminal block with clamping collar | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Total connection points | 5 | |
| Total potentials | 5 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Number of rows | 1 | |
| Contact pitch | 5 mm | |
| Current rating | 16 A | |
| Nominal conductor cross-section | 2.5 mm² | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Conductor strip length | 8–9 mm | |
| Conductor connection direction to PCB | 0° | |
| Mounting type | Mounting flange, panel mounting and feed-through mounting | |
| PCB contact technology | Through-hole technology (THT) | |
| Solder pin arrangement | In-line across the terminal strip | |
| Number of solder pins per potential | 1 | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| Solder pin length | 4.7 mm | |
| Drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Specified housing sheet thickness | 1.5 mm | |
| Width | 40.2 mm | |
| Height | 19 mm | |
| Height above PCB surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Insulation material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Compliance | RoHS compliant | |
| Applicable standards | UL 1059, CSA and IEC/EN 60664-1 | |
| Country of origin | Germany |
The WAGO 231-605/023-000 is a 5-pole PCB terminal block used to connect copper conductors directly to printed circuit boards. It features CAGE CLAMP® spring pressure termination, through-hole solder contacts and a clamping collar for suitable panel and feed-through applications.
The /023-000 version features a clamping collar and mounting flange for secure mechanical installation. It is designed for PCB mounting and suitable panel or feed-through arrangements, rather than functioning as a detachable male connector plug.
The terminal block accepts solid and fine-stranded copper conductors from 0.08–2.5 mm². Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm².
The WAGO 231-605/023-000 has a 16 A current rating. The permissible operating current of the finished assembly depends on conductor size, PCB design, ambient conditions and applicable electrical standards.
The terminal block uses through-hole solder mounting with 0.8 × 1.3 mm solder pins and a 4.7 mm pin length. Conductors are secured using CAGE CLAMP® spring pressure terminals, while the mounting flange and clamping collar support suitable panel installations. The recommended conductor strip length is 8–9 mm.
WAGO PCB terminal blocks are widely used in industrial automation, control panels and OEM electronic equipment where dependable electrical connections are essential. The WAGO 231-605/023-000 combines five-pole CAGE CLAMP® conductor termination, secure through-hole PCB mounting and a practical clamping collar design to support efficient wiring and reliable equipment assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.