Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.43
The WAGO 231-605/019-000/033-000 is a 5-pole male pluggable connector from the WAGO MCS MIDI Classic 231 Series, designed for dependable electrical connections in industrial automation, control panels and electronic equipment. Its CAGE CLAMP® spring pressure connection technology provides secure conductor termination without conventional terminal screws, supporting efficient installation and reliable wiring.
Based on the WAGO 231-605/019-000 connector configuration, this product features a 5 mm contact pitch, five independent electrical connection positions and a nominal conductor capacity of 2.5 mm². Its integrated clamping collar and mounting flange arrangement supports secure installation in suitable equipment panels and feed-through applications.
The standard connector configuration offers a 12 A IEC rated current and a 320 V rated voltage under overvoltage category III, pollution degree 3. The full ordering number 231-605/019-000/033-000 identifies a specific variant; the additional /033-000 configuration should be confirmed against WAGO's variant-specific documentation when exact mechanical compatibility is critical.
The WAGO 231-605/019-000/033-000 provides a practical connection solution for industrial equipment requiring secure conductor termination and a detachable electrical interface. Its CAGE CLAMP® spring pressure system maintains consistent contact force on copper conductors, helping reduce maintenance associated with conventional screw terminal connections.
The MCS MIDI Classic connector system is designed for efficient equipment assembly. Conductors can be terminated in the connector before installation, allowing wiring assemblies to be prepared separately from the main electronic equipment. This modular approach simplifies production, installation and subsequent servicing.
The mounting flange and clamping collar arrangement associated with the 231-605/019-000 base connector provides additional mechanical support for suitable panel and feed-through applications. Its five-pole construction makes it useful for multi-circuit control, auxiliary power and signal connections where a compact, pluggable interface is required.
Correct selection of the mating connector is essential. The complete assembly must be checked for compatible pole count, pitch, coding, mounting arrangement and electrical ratings. WAGO MCS connectors are not designed for load-breaking operations and must not be connected or disconnected while live or under load. Accessible male contacts must not remain energised when unmated.
| Manufacturer | WAGO |
|---|---|
| Series | MCS MIDI Classic 231 Series |
| Manufacturer part number | 231-605/019-000/033-000 |
| Base connector reference | 231-605/019-000 |
| Product type | Male pluggable terminal connector |
| Connector gender | Male |
| Connection technology | CAGE CLAMP® spring pressure connection |
| Number of poles | 5 |
| Number of connection points | 5 |
| Number of potentials | 5 |
| Number of levels | 1 |
| Contact pitch | 5 mm |
| Rated current (base connector, IEC) | 12 A |
| Rated voltage (III/3) | 320 V |
| Rated voltage (III/2) | 320 V |
| Rated voltage (II/2) | 630 V |
| Rated impulse voltage | 4 kV |
| Rated current (UL 1059, Use Group B) | 15 A |
| Rated voltage (UL 1059, Use Group B) | 300 V |
| Rated current (UL 1059, Use Group D) | 10 A |
| Rated voltage (UL 1059, Use Group D) | 300 V |
| Nominal conductor cross-section | 2.5 mm² |
| Solid conductor cross-section | 0.08–2.5 mm² |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² |
| Conductor size | 28–12 AWG |
| Strip length | 8–9 mm |
| Actuation type | Operating tool |
| Conductor entry direction relative to mating direction | 0° |
| Connector arrangement | Straight, 180° conductor entry |
| Base mounting arrangement | Mounting flange, feed-through and panel mounting |
| Base connector width | 39.8 mm |
| Base connector height | 14.3 mm |
| Base connector depth | 27.5 mm |
| Base connector weight | Approximately 8.6 g |
| Contact material | Electrolytic copper |
| Contact plating | Tin |
| Clamping spring material | Chrome-nickel spring steel |
| Insulation material | Polyamide PA66 |
| Housing colour | Grey |
| Operating temperature (base connector) | −60 °C to +100 °C |
| Flammability classification | UL 94 V-0 |
| Applicable electrical standard | IEC/EN 60664-1 |
| Connector safety standard | IEC/EN 61984 |
| Variant-specific mechanical details | Confirm /033-000 configuration against the manufacturer's drawing |
The WAGO 231-605/019-000/033-000 is a 5-pole male pluggable connector used for detachable electrical connections in industrial automation, electronic control equipment and modular wiring assemblies.
The 231-605/019-000 base configuration features a mounting flange and clamping collar for suitable panel and feed-through applications. The additional /033-000 suffix identifies a further ordering variant whose exact mechanical details should be checked against WAGO documentation.
The standard connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm², corresponding to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm².
The 231-605/019-000 base connector has an IEC rated current of 12 A and a 320 V rated voltage under overvoltage category III, pollution degree 3. The complete variant and mating assembly must be checked against the applicable manufacturer ratings.
The connector uses CAGE CLAMP® spring pressure technology. An appropriate operating tool opens the clamp, allowing a correctly stripped copper conductor to be inserted. Releasing the clamp secures the conductor without conventional screw tightening. The recommended strip length is 8–9 mm.
WAGO MCS MIDI Classic pluggable connectors provide dependable electrical connections for industrial automation, control equipment and OEM machinery. The WAGO 231-605/019-000/033-000 combines a five-pole connection arrangement, CAGE CLAMP® spring pressure technology and a mounting-flange connector design to support efficient wiring and reliable modular equipment assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.