Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.58
The WAGO 231-605/018-000 is a 5-pole, 1-conductor male connector from the WAGO MCS MIDI Classic 231 Series. Designed for industrial pluggable connection systems, it combines CAGE CLAMP® spring-pressure connection technology, a 5 mm contact pitch and integrated snap-in mounting feet for DIN-35 rail or panel mounting applications.
With five independent electrical connection positions, the WAGO 231-605/018-000 accommodates solid and fine-stranded conductors from 0.08 to 2.5 mm². Its spring-clamp termination system enables reliable conductor connections without conventional screw-tightening, while the male connector interface allows detachable connections to compatible WAGO MCS components.
The connector offers an IEC rated current of 12 A, rated voltages of 320 V or 630 V depending on the applicable insulation coordination conditions, and a 4 kV rated impulse voltage. Its grey polyamide housing, tin-plated copper contacts and snap-in mounting arrangement make it suitable for industrial automation, machinery control and modular electrical equipment.
The WAGO 231-605/018-000 combines WAGO's established CAGE CLAMP® spring-pressure connection principle with a practical snap-in mounting design. The spring clamp maintains contact pressure on properly prepared conductors without relying on conventional screw-terminal tightening torque, helping support consistent conductor retention during equipment operation.
The connector's five-pole configuration enables wiring assemblies to be prepared separately before installation. Its integrated snap-in mounting feet allow the connector to be secured in compatible mounting arrangements, reducing the need for separate fastening hardware where the specified panel geometry is provided.
The 5 mm contact pitch and 180° conductor entry support compact, organised wiring. The grey PA66 housing, tin-plated copper contacts and chrome-nickel spring-steel clamping elements provide a durable construction for industrial electrical assemblies.
For dependable operation, conductors must be prepared to the specified stripping length and connected using the appropriate operating tool. The complete connector assembly must be selected according to its electrical ratings, mating compatibility and environmental requirements. Connectors without breaking capacity must not be mated or unmated while energised or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 5 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-605/018-000 | |
| Series | 231 | |
| Product family | MCS MIDI Classic | |
| Product type | 1-conductor male connector | |
| Connector interface | Male connector / plug | |
| Connection technology | CAGE CLAMP® | |
| Actuation type | Operating tool | |
| Number of potentials | 5 | |
| Total number of connection points | 5 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Conductor entry orientation | 180° | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with ferrule and plastic collar | 0.25–1.5 mm² | |
| Fine-stranded conductor with ferrule without plastic collar | 0.25–2.5 mm² | |
| Conductor size range | 28–12 AWG | |
| Stripping length | 8–9 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Mounting type | Snap-in mounting feet | |
| Mounting arrangement | DIN-35 rail / panel mounting | |
| Compatible panel thickness | 0.6–1.2 mm | |
| Width | 28.2 mm | |
| Height | 18.8 mm | |
| Height from mounting surface | 14.3 mm | |
| Depth | 27.5 mm | |
| Weight | Approximately 7.9 g | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Flammability classification | UL 94 V-0 | |
| Material group | I | |
| Limiting temperature range | −60 to +100 °C | |
| Processing temperature range | −35 to +60 °C | |
| Mismating protection | No | |
| Standard packaging quantity | 50 pieces | |
| GTIN / EAN | 4044918257206 | |
| Country of origin | Germany |
The WAGO 231-605/018-000 is a five-pole, one-conductor male connector from the WAGO MCS MIDI Classic 231 Series, featuring CAGE CLAMP® spring-pressure termination, a 5 mm pitch and snap-in mounting feet for DIN-35 rail or panel mounting.
The connector has 5 poles and five independent electrical potentials, with one conductor connection per pole and a 5 mm contact pitch.
The connector accepts solid and fine-stranded conductors from 0.08 to 2.5 mm², corresponding to 28–12 AWG. The specified conductor stripping length is 8–9 mm.
The connector has an IEC rated current of 12 A, rated voltages of 320 V or 630 V depending on insulation coordination conditions, and a 4 kV rated impulse voltage.
The connector features integrated snap-in mounting feet for compatible DIN-35 rail or panel mounting arrangements. WAGO specifies a panel thickness range of 0.6–1.2 mm for the snap-in mounting configuration.
The 231-605/018-000 features snap-in mounting feet for DIN-35 rail or panel mounting. The 231-605/019-000 belongs to the related clamping-collar connector configuration. The exact mechanical arrangement and mating requirements should be checked before substitution.
No. The connector should only be mated or unmated when de-energised unless WAGO explicitly specifies breaking capacity for the complete connector assembly. Appropriate protection against accessible live contacts must also be provided.
WAGO MCS MIDI Classic connectors combine CAGE CLAMP® spring-pressure termination with practical pluggable and snap-in mounting designs, providing industrial equipment manufacturers, automation engineers and electrical panel builders with dependable solutions for modular electrical connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.