Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.23
The WAGO 231-605/018-000/033-000 is a 5-pole male pluggable connector from the established WAGO MCS MIDI Classic 231 Series, designed for reliable detachable electrical connections in industrial automation, control panels and electronic equipment. Based on the 231-605/018-000 connector configuration, it combines CAGE CLAMP® spring pressure connection technology, a 5 mm contact pitch and support for conductors up to 2.5 mm².
The connector uses WAGO's proven spring pressure termination system to provide secure conductor connections without conventional screw terminals. The MCS MIDI Classic design supports cable pre-assembly and on-unit wiring through tool-operated CAGE CLAMP® actuation. Its pluggable male interface enables convenient connection and disconnection from compatible mating components during equipment installation, servicing and replacement.
The underlying 231-605/018-000 configuration features 5 connection positions, a standard IEC rated current of 12 A and snap-in mounting feet for DIN-35 rail or suitable panel installation. The complete 231-605/018-000/033-000 ordering reference identifies an additional connector variant, so its specific supplementary features should be checked against the applicable WAGO configuration information.
The WAGO MCS MIDI Classic 231 Series provides a modular solution for detachable electrical connections in industrial automation and electronic equipment. Its CAGE CLAMP® spring pressure technology uses a resilient clamping spring to maintain contact pressure on the conductor. This helps deliver consistent electrical contact while avoiding the periodic retightening associated with conventional screw terminals.
The WAGO 231-605/018-000/033-000 belongs to the five-pole, 5 mm pitch connector family and is intended for integration with mechanically compatible mating components. The underlying /018-000 connector design supports convenient mounting and organised cable routing in electrical assemblies. The additional /033-000 suffix denotes a variant-specific configuration; mating compatibility and any supplementary mechanical features should be verified before installation. Pluggable connections must not be made or broken under electrical load unless the specific assembly is approved for that purpose.
| Manufacturer | WAGO |
|---|---|
| Series | MCS MIDI Classic 231 Series |
| Model | 231-605/018-000/033-000 |
| Base connector reference | 231-605/018-000 |
| Product type | Male pluggable connector |
| Connector configuration | 5-pole male connector |
| Number of poles | 5 |
| Number of conductor connections | 5 |
| Number of rows | 1 |
| Contact pitch | 5 mm |
| Connection technology | CAGE CLAMP® |
| Termination method | Spring pressure clamp |
| Actuation method | Operating tool |
| Standard conductor cross-section | 0.08–2.5 mm² |
| Standard conductor size | 28–12 AWG |
| Standard conductor stripping length | 8–9 mm |
| Rated current (IEC, base configuration) | 12 A |
| Rated voltage (IEC, II/2, base configuration) | 630 V |
| Rated current (UL, base configuration) | 15 A |
| Rated voltage (UL, base configuration) | 600 V |
| Contact gender | Male |
| Contact type | Pluggable male contact |
| Base mounting arrangement | Snap-in mounting feet |
| Base mounting compatibility | DIN-35 rail / panel mounting |
| Contact material | Electrolytic copper |
| Contact plating | Tin |
| Clamping spring material | Chrome-nickel spring steel |
| Insulation material | Polyamide PA66 |
| Standard housing colour | Grey |
| Flammability classification | UL94 V-0 |
| Base connector temperature limit range | −60 to +100 °C |
| Base connector processing temperature | −35 to +60 °C |
| Base connector nominal length | 28.2 mm |
| Base connector weight | Approximately 7.9 g |
| Connector system | WAGO MULTI CONNECTION SYSTEM |
| Applicable connector standard | IEC/EN 61984 |
| Product category | Pluggable electrical connectors |
The WAGO 231-605/018-000/033-000 is a five-pole male pluggable connector intended for detachable electrical connections in industrial automation, electrical control equipment and modular wiring systems.
The connector has 5 poles, providing five separate conductor connection positions with a 5 mm contact pitch.
The WAGO MCS MIDI Classic 231 Series uses CAGE CLAMP® spring pressure connection technology, allowing conductors to be securely terminated using an appropriate operating tool without conventional screw terminals.
The standard 231-605 connector configuration accommodates suitable conductors from 0.08 to 2.5 mm², equivalent to approximately 28–12 AWG. The permitted conductor range depends on conductor construction and the applicable variant specification.
The standard 231-605 connector has an IEC rated current of 12 A. The rating applicable to the complete /033-000 variant should be checked against its specific technical documentation.
The underlying 231-605/018-000 connector has an IEC voltage rating of up to 630 V under overvoltage category II and pollution degree 2 conditions. The permissible voltage depends on the applicable installation conditions and connector configuration.
The base 231-605/018-000 connector features snap-in mounting feet for DIN-35 rail or suitable panel mounting. Any additional mounting characteristics associated with the /033-000 suffix should be confirmed for the exact variant.
CAGE CLAMP® technology provides spring pressure conductor termination that maintains reliable electrical contact without conventional screw tightening, simplifying installation and reducing maintenance requirements.
The WAGO MCS MIDI Classic connector system should not be used to make or break live electrical loads unless the specific assembly is expressly approved for that duty. The circuit should normally be de-energised before connecting or disconnecting the connector.
The connector is intended for use with suitable 5-pole WAGO MCS MIDI Classic 231 Series mating components featuring a compatible 5 mm pitch. Mechanical configuration, coding and variant-specific features must also be considered when selecting a mating connector.
WAGO MCS MIDI Classic connectors are widely used by electrical engineers, panel builders and industrial equipment manufacturers for dependable modular wiring. The WAGO 231-605/018-000/033-000 combines a five-pole pluggable connection format with the established WAGO 231 Series architecture, supporting efficient electrical interconnections in industrial automation, machinery and control equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.