Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.90
The WAGO 231-605/017-000 is a 5-pole through-panel PCB terminal block from the WAGO 231 Series, designed for reliable electrical connections between external wiring and printed circuit board assemblies. Featuring CAGE CLAMP® spring-pressure connection technology, a 5 mm pin spacing and integrated fixing flanges, this terminal block provides a practical solution for industrial control equipment, electronic enclosures and automation systems.
Its five independent connection positions accommodate solid and fine-stranded conductors from 0.08 to 2.5 mm². The screwdriver-actuated spring clamps provide secure conductor termination without conventional screw-tightening, while the integrated mounting flanges allow the terminal strip to be installed through an equipment panel or secured as part of a PCB assembly.
Rated at 16 A under IEC specifications, with rated voltages of 320 V or 630 V depending on insulation coordination conditions, the WAGO 231-605/017-000 is suitable for a range of industrial electrical applications. Its grey polyamide housing, through-hole solder contacts and compact five-position layout make it particularly useful for equipment requiring accessible and dependable field-wiring connections.
The WAGO 231-605/017-000 uses screwdriver-actuated CAGE CLAMP® spring-pressure technology to establish electrical contact with properly prepared conductors. The spring mechanism maintains conductor contact pressure independently of conventional screw-terminal tightening torque, helping provide consistent and repeatable wiring connections.
Its five-pole through-panel design allows external wiring to connect to internal electronic circuitry through a compact terminal strip. Integrated fixing flanges provide mechanical mounting points, while the solder contacts establish permanent connections to the printed circuit board. This arrangement is useful in industrial control modules and electronic enclosures where wiring accessibility and secure mounting are important.
The grey PA66 housing, tin-plated copper contacts and spring-steel clamping elements support dependable electrical assembly. Installers should observe the manufacturer's conductor preparation requirements, PCB footprint, mounting dimensions and applicable electrical ratings. The complete equipment design must provide suitable insulation, mechanical support and protection against accidental contact with live conductors.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 5 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-605/017-000 | |
| Series | 231 | |
| Product type | Through-panel PCB terminal block | |
| Connection technology | CAGE CLAMP® | |
| Connection design | Spring-pressure connection with clamping collar | |
| Actuation type | Operating tool / screwdriver | |
| Number of potentials | 5 | |
| Number of connection points | 5 | |
| Number of levels | 1 | |
| Number of connection rows | 1 | |
| Pin spacing | 5 mm | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size range | 28–14 AWG | |
| Stripping length | 8–9 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL 1059, use group B) | 15 A | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group C) | 15 A | |
| Rated voltage (UL 1059, use group C) | 150 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| PCB contact technology | Through-hole technology (THT) | |
| PCB termination | Angled solder pins | |
| Mounting type | Integrated fixing flanges | |
| Mounting applications | Through-panel and PCB installation | |
| Width | 40.2 mm | |
| Height | 19 mm | |
| Height above mounting surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Solder pin length | 4.7 mm | |
| Drilled hole diameter | 1.8 mm, +0.1 mm tolerance | |
| Housing material | Polyamide 66 (PA66) | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL 94 V-0 | |
| Limiting temperature range | −60 to +105 °C | |
| Weight | Approximately 7.6 g | |
| Standard packaging quantity | 50 pieces | |
| GTIN / EAN | 4044918257190 | |
| Country of origin | Germany |
The WAGO 231-605/017-000 is a five-pole through-panel PCB terminal block used to connect external electrical conductors to printed circuit boards and industrial electronic equipment.
The terminal block has 5 poles and five independent electrical potentials, with a 5 mm pin spacing.
The terminal block accepts solid and fine-stranded conductors from 0.08 to 2.5 mm², corresponding to 28–14 AWG. The specified conductor stripping length is 8–9 mm.
The terminal block has an IEC rated current of 16 A, rated voltages of 320 V or 630 V depending on the applicable insulation coordination conditions, and a 4 kV rated impulse voltage.
It uses WAGO CAGE CLAMP® spring-pressure connection technology with clamping collars. A suitable operating tool or screwdriver opens the clamp for conductor insertion and removal.
Yes. The terminal block features integrated fixing flanges designed for through-panel installation and compatible PCB mounting arrangements. The manufacturer's mounting drawing should be followed when preparing the panel opening and PCB layout.
The 231-605/017-000 has 5 poles, while the 231-604/017-000 has 4 poles. Both belong to the WAGO 231 Series through-panel PCB terminal block family and use a 5 mm pin spacing, but they have different connection counts and overall dimensions.
WAGO 231 Series through-panel PCB terminal blocks combine CAGE CLAMP® spring-pressure connections with practical mounting flanges, providing industrial equipment manufacturers, electronics engineers and automation specialists with dependable solutions for field-wiring interfaces and electronic control assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.