Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.86
The WAGO 231-604/018-000/033-000 is a 4-pole male electrical connector belonging to the WAGO 231 Series. Designed for use in compatible pluggable connection systems, this connector provides a practical interface for industrial automation, electrical control equipment and modular electronic assemblies.
The product is identified in a WAGO distributor listing as a 1-conductor male connector. Within the WAGO 231-604 family, the connector arrangement uses a 5 mm contact pitch and is associated with WAGO's established CAGE CLAMP® spring-pressure connection technology, which supports secure conductor termination without conventional screw-clamping terminals.
The full ordering code 231-604/018-000/033-000 identifies a specific configuration. The exact mechanical characteristics associated with the /018-000/033-000 suffix, including any special housing, coding or mounting features, should be confirmed against WAGO's product-specific documentation. This is particularly important when replacing an existing connector or selecting compatible mating components.
The WAGO 231-604/018-000/033-000 belongs to a connector family developed for practical electrical connections in industrial and electronic equipment. WAGO's CAGE CLAMP® connection principle uses spring pressure to retain properly prepared conductors, reducing reliance on conventional screw-tightening procedures.
Its four-pole male interface enables integration with a suitable mating connector, supporting modular equipment design and detachable wiring assemblies. This can be particularly useful in electronic control modules, industrial instrumentation and machinery where connection assemblies may need to be installed or replaced during maintenance.
The /018-000/033-000 configuration must be selected according to its complete manufacturer part number. Although related WAGO 231-604 products share a common connector family, differences in coding, housing design or mechanical arrangements may affect interchangeability. The exact current and voltage ratings, conductor capacity, stripping length, temperature limits and mating compatibility should be verified from WAGO's technical documentation before installation.
| Manufacturer | WAGO |
|---|---|
| Manufacturer part number | 231-604/018-000/033-000 |
| Product series | 231 |
| Product category | Industrial electrical connector |
| Connector type | Male connector |
| Number of poles | 4 |
| Nominal contact pitch | 5 mm |
| Connection design | One-conductor male connector |
| Connection technology family | CAGE CLAMP® |
| Connector interface | Male |
| Manufacturer configuration | /018-000/033-000 |
| Product identification | Complete manufacturer part number required for exact variant selection |
The WAGO 231-604/018-000/033-000 is a four-pole male electrical connector from the WAGO 231 Series, identified as a one-conductor male connector for compatible industrial electrical connection assemblies.
The connector has 4 poles, providing four electrical connection positions in the WAGO 231-604 connector family.
The WAGO 231-604 connector family uses a nominal 5 mm contact pitch. The exact mechanical configuration of the /018-000/033-000 variant should be checked against the manufacturer's technical drawing.
The connector belongs to the WAGO 231 Series CAGE CLAMP® connection family, which uses spring-pressure conductor termination. The precise conductor capacity and operating procedure for this ordering variant should be confirmed in WAGO's product-specific documentation.
The exact current and voltage ratings for 231-604/018-000/033-000 require confirmation from WAGO's manufacturer documentation. Electrical ratings from other 231-604 variants should not automatically be applied to this configuration.
Not necessarily. The 231-604/018-000/033-000 identifies a specific manufacturer configuration. Its mechanical design, coding and mating requirements should be compared with the standard 231-604 before substitution.
The connector should be mated or unmated only when de-energised unless WAGO explicitly specifies breaking capacity for the complete connector assembly. Appropriate protection against accessible live electrical contacts must also be provided.
WAGO 231 Series connectors support industrial equipment manufacturers, automation engineers and electronics specialists with modular connection solutions designed for practical assembly, servicing and dependable electrical integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.