Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.30
The WAGO 231-603/023-000 is a 3-pole feedthrough PCB terminal block from the WAGO 231 Series, designed for reliable conductor connections in industrial electronics, electrical control panels and printed circuit board assemblies. Featuring CAGE CLAMP® spring pressure connection technology, a 5 mm pin spacing and an integrated clamping collar, this terminal block provides a dependable interface between external wiring and electronic equipment.
Designed for conductors up to 2.5 mm², the WAGO 231-603/023-000 uses screwdriver-actuated spring clamps to establish secure electrical connections without conventional screw-clamping terminals. Its three independent connection positions accommodate a range of industrial control and power distribution wiring requirements, while the grey polyamide housing provides durable electrical insulation.
With an IEC rated current of 16 A, rated voltages of up to 630 V under specified insulation coordination conditions and integrated mounting flanges, the 231-603/023-000 is suitable for PCB and front-panel installation. Its feedthrough construction supports flush or protruding mounting arrangements, making it particularly useful for industrial equipment requiring accessible and securely mounted wiring connections.
The WAGO 231-603/023-000 incorporates screwdriver-actuated CAGE CLAMP® spring pressure technology to establish reliable electrical connections between conductors and the terminal block. The spring clamp maintains contact pressure independently of conventional screw-tightening torque, helping provide consistent conductor retention during equipment operation.
Its three-pole feedthrough design is especially useful for connecting external wiring to internal electronic assemblies. The integrated mounting flanges support installation through equipment panels or onto suitable PCB assemblies, while the through-hole solder contacts provide permanent electrical connections to the circuit board.
The terminal block's grey PA66 housing, compact 5 mm pitch and clearly defined conductor capacity support organised industrial wiring. For dependable long-term performance, conductors must be prepared to the specified stripping length, the correct operating tool must be used and the complete installation must remain within the applicable electrical and environmental ratings.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 3 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series | |
| Manufacturer part number | 231-603/023-000 | |
| Product type | Feedthrough PCB terminal block | |
| Connection technology | CAGE CLAMP® | |
| Connection design | Spring pressure connection with clamping collar | |
| Actuation type | Operating tool / screwdriver | |
| Number of potentials | 3 | |
| Total number of clamping points | 3 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Number of rows | 1 | |
| Pin spacing | 5 mm | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with ferrule, without plastic collar | 0.25–2.5 mm² | |
| Conductor size range | 28–14 AWG | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL 1059, use group B) | 15 A | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group C) | 15 A | |
| Rated voltage (UL 1059, use group C) | 150 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Rated current (CSA, use group B) | 15 A | |
| Rated voltage (CSA, use group B) | 300 V | |
| Rated current (CSA, use group C) | 15 A | |
| Rated voltage (CSA, use group C) | 150 V | |
| Rated current (CSA, use group D) | 10 A | |
| Rated voltage (CSA, use group D) | 300 V | |
| PCB contact technology | Through-hole technology (THT) | |
| PCB termination | Solder pins | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| Solder pin length | 4.7 mm | |
| Solder pin arrangement | In-line | |
| Solder pins per potential | 1 | |
| Mounting type | Integrated mounting flanges | |
| Installation options | PCB mounting or front-panel mounting | |
| Panel mounting arrangement | Flush or protruding | |
| Specified panel thickness | 1.5 mm | |
| Width | 30.2 mm | |
| Height | 19 mm | |
| Height above mounting surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Weight | Approximately 4.97 g | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Limiting temperature range | −60 to +105 °C | |
| Material group | I | |
| Standard packaging quantity | 50 pieces | |
| GTIN / EAN | 4044918279093 | |
| Country of origin | Germany | |
| Applicable standards | IEC/EN 60664-1, UL 1059 and CSA | |
| Environmental compliance | RoHS compliant |
The WAGO 231-603/023-000 is a 3-pole feedthrough PCB terminal block used to connect electrical conductors to industrial electronic equipment, printed circuit boards and enclosure-mounted control assemblies.
The terminal block features 3 poles and 3 independent electrical potentials, with a 5 mm pin spacing and three CAGE CLAMP® conductor connection points.
The terminal block accepts solid and fine-stranded conductors from 0.08 to 2.5 mm², corresponding to the specified 28–14 AWG range. Fine-stranded conductors with ferrules without plastic collars are supported from 0.25 to 2.5 mm².
It uses WAGO CAGE CLAMP® spring pressure connection technology with clamping collars. A suitable operating tool or screwdriver opens the spring clamp for conductor insertion or removal.
The terminal block has an IEC rated current of 16 A, rated voltages of 320 V or 630 V depending on the applicable insulation coordination conditions, and a 4 kV rated impulse voltage.
Yes. The terminal block features integrated mounting flanges for PCB or front-panel installation. It supports flush or protruding feedthrough mounting arrangements, with manufacturer mounting information specifying a 1.5 mm panel thickness.
The 231-603/023-000 is a 3-pole feedthrough PCB terminal block, while the 231-602/023-000 is a 2-pole version. Both use CAGE CLAMP® technology and a 5 mm pin spacing, but they provide different numbers of conductor connection points and have different overall widths.
WAGO 231 Series feedthrough PCB terminal blocks combine proven CAGE CLAMP® spring pressure technology with practical panel-mounting options, providing industrial equipment manufacturers, electronics engineers and automation specialists with reliable solutions for electrical wiring interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.