Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.97
The WAGO 231-603/019-000 is a robust and reliable 3-pole male pluggable terminal block connector designed for secure electrical connections in industrial automation, control panels and electronic equipment. As part of the WAGO MCS MIDI Classic 231 Series, this connector features advanced CAGE CLAMP® spring pressure connection technology, a 5 mm contact pitch and a clamping collar design for dependable installation in industrial electrical systems.
The connector provides a convenient screwless wiring solution for solid, stranded and fine-stranded copper conductors. WAGO's proven CAGE CLAMP® technology creates a secure, vibration-resistant electrical connection without requiring conventional screw terminals. Its pluggable construction allows electrical connections to be assembled, disconnected and serviced efficiently, helping reduce installation and maintenance time.
With a rated current of 12 A (IEC), support for conductors up to 2.5 mm² and a 5 mm pin spacing, the WAGO 231-603/019-000 is suitable for industrial control wiring, modular electrical equipment and power or signal connections. Its grey polyamide housing, 3-pole configuration and mounting flange arrangement make it a versatile solution for panel-mounted and wire-to-wire electrical interfaces.
The WAGO 231-603/019-000 uses CAGE CLAMP® spring pressure technology to provide reliable electrical connections without conventional screw terminals. A spring steel clamping element applies continuous contact pressure to the conductor, helping maintain a secure connection despite vibration and normal operating temperature changes. This technology reduces the risk of loose connections associated with incorrectly tightened screw terminals.
The connector supports convenient conductor installation using a suitable operating tool, with spring clamp actuation accessible from vertical and horizontal directions. Its three independent connection points allow multiple circuits to be connected through a single compact pluggable interface. The 5 mm pitch MCS MIDI Classic system enables modular electrical assemblies using appropriately matched mating connectors.
The 231-603/019-000 variant incorporates mounting flanges and a clamping collar arrangement for mechanical attachment to suitable equipment or panels. Its robust polyamide housing and tin-plated copper contacts support long-term use in industrial electrical environments. As a connector without breaking capacity, it must not be connected or disconnected under electrical load, and the complete installation must comply with applicable electrical safety requirements.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 3 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Model | 231-603/019-000 | |
| Product type | Male pluggable terminal block connector | |
| Connector gender | Male | |
| Number of connection points | 3 | |
| Number of electrical potentials | 3 | |
| Number of rows | 1 | |
| Contact pitch | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated current (UL) | 15 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (UL) | 600 V | |
| Rated surge voltage (IEC, II/2) | 4 kV | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Compatible conductor types | Solid, stranded and fine-stranded copper conductors | |
| Conductor stripping length | 8–9 mm | |
| Mounting type | Mounting flanges / panel mounting | |
| Connection arrangement | Pluggable, right-angle connection | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Flammability rating | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Processing temperature | −35 to +60 °C | |
| Dimensions (W × H × D) | 29.8 × 14.3 × 27.5 mm | |
| Weight | Approx. 5.7 g | |
| Connector standard | IEC/EN 61984 | |
| Product system | WAGO MCS – MULTI CONNECTION SYSTEM | |
| Country of origin | Germany | |
| EAN / GTIN | 4044918256698 |
The WAGO 231-603/019-000 is a 3-pole male pluggable connector used to provide secure, detachable electrical connections in industrial control panels, automation equipment and modular electrical systems. It uses CAGE CLAMP® spring pressure technology for screwless conductor termination.
The connector has a rated current of 12 A under IEC specifications and 15 A under UL specifications. The allowable operating current depends on the applicable approval, conductor size, mating connector and installation conditions.
The connector accepts copper conductors with cross-sections from 0.08 to 2.5 mm² (28–12 AWG). It is designed for solid, stranded and fine-stranded conductors using WAGO CAGE CLAMP® connection technology.
The WAGO 231-603/019-000 features a 5 mm contact pitch and three poles. It is designed for use with compatible WAGO MCS MIDI Classic mating connectors that have the appropriate contact spacing and mechanical configuration.
The connector features CAGE CLAMP® screwless spring terminals for conductor termination and a mounting flange arrangement for suitable panel or equipment installation. Conductors are stripped to approximately 8–9 mm and inserted using the appropriate operating tool.
WAGO MCS MIDI Classic pluggable connectors are designed to provide secure, efficient and maintainable electrical connections in industrial automation and electronic equipment. The WAGO 231-603/019-000 combines proven CAGE CLAMP® spring pressure technology, a compact 3-pole design and robust mounting features to deliver dependable connectivity for modern industrial electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.