Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.30
The WAGO 231-603/017-000 is a 3-pole through-panel PCB terminal block designed for secure wire-to-board electrical connections in industrial automation, electronic equipment and control systems. Featuring WAGO's proven CAGE CLAMP® spring pressure connection technology, this terminal strip provides dependable conductor termination without conventional screw connections.
With a 5 mm pin spacing, 0.08–2.5 mm² conductor connection range and angled 1 × 1.2 mm solder pins, the WAGO 231-603/017-000 combines practical field wiring with reliable PCB integration. Its distinctive fixing flanges and clamping collar support secure installation in through-panel applications, distinguishing this version from the standard WAGO 231-603 male pluggable connector.
The grey polyamide housing provides three separate electrical connection positions, while the spring pressure terminals accommodate suitable solid, stranded and fine-stranded conductors. With an IEC rated current of 16 A, the WAGO 231-603/017-000 offers a compact, serviceable connection solution for industrial control panels, electronic modules and OEM equipment requiring direct conductor-to-PCB termination.
The WAGO 231-603/017-000 provides a practical connection between external electrical conductors and printed circuit boards. Its CAGE CLAMP® terminals secure conductors using spring pressure, while the angled solder pins establish the electrical connection to the PCB. This arrangement is particularly useful where field wiring must connect directly to an electronic assembly without requiring a separate pluggable connector interface.
Unlike the standard WAGO 231-603 male connector, the 231-603/017-000 incorporates fixing flanges for through-panel applications. This enables equipment designers to position conductor connections at an enclosure or panel interface while maintaining a soldered connection to the internal PCB. The terminal block is suitable for industrial automation controllers, machinery electronics and control equipment where secure mounting, straightforward conductor termination and service access are important. Electrical and mechanical installation must follow the manufacturer's requirements and the equipment's applicable safety standards.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 3 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 | |
| Model | 231-603/017-000 | |
| Manufacturer part number | 231-603/017-000 | |
| Product type | Through-panel PCB terminal block | |
| Connection arrangement | Wire-to-board | |
| Number of connection points | 3 | |
| Number of potentials | 3 | |
| Number of levels | 1 | |
| Pin spacing | 5 mm | |
| Conductor connection technology | CAGE CLAMP® | |
| Conductor termination | Screwless spring pressure connection | |
| Actuation method | Operating tool | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC) | 320 V under specified insulation conditions | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV under specified insulation conditions | |
| PCB connection technology | Through-hole soldering (THT) | |
| Solder pin orientation | Angled / right-angle | |
| Solder pin dimensions | 1 × 1.2 mm | |
| Mounting arrangement | PCB and through-panel mounting | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Width | 30.2 mm | |
| Depth | 19.1 mm | |
| Environmental compliance | RoHS | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918256636 |
The WAGO 231-603/017-000 is a 3-pole through-panel PCB terminal block used to connect electrical conductors directly to printed circuit boards. Its angled solder pins provide the PCB connection, while integrated fixing flanges support panel mounting.
The standard WAGO 231-603 is a male pluggable connector intended for use with compatible mating connectors. The WAGO 231-603/017-000 is a through-panel PCB terminal block with angled solder pins, fixing flanges and a clamping collar, designed for direct wire-to-board connections and panel installation.
The terminal block accommodates suitable conductors with cross-sections from 0.08–2.5 mm², corresponding to 28–14 AWG. The specified conductor stripping length is 8–9 mm. Conductor compatibility should be checked against the manufacturer's requirements for the particular conductor type.
The WAGO 231-603/017-000 has an IEC rated current of 16 A. Published voltage ratings include 320 V and up to 630 V under specified IEC insulation conditions. The applicable voltage rating depends on the installation's overvoltage category, pollution degree and other design requirements.
The terminal block uses angled 1 × 1.2 mm solder pins for through-hole PCB soldering and includes fixing flanges for panel installation. Conductors are terminated using tool-actuated CAGE CLAMP® spring pressure connections, eliminating the need for conventional screw tightening.
WAGO PCB terminal blocks provide practical conductor connections for industrial electronics, automation equipment and control panel assemblies. The WAGO 231-603/017-000 combines three-pole CAGE CLAMP® termination, angled PCB solder pins and integrated panel fixing flanges to support secure, accessible wire-to-board connections in industrial equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.